I there, my question is quite simple, I would like to know if the "apple remote control" can be used with a mac mini and , if so, it can be used to control also the "logic pro" functions (e.g. record, start, stop etc). Thks a lot, Danilo

I there, my question is quite simple, I would like to know if the "apple remote control" can be used with a mac mini and , if so, it can be used to control also the "logic pro" functions (e.g. record, start, stop etc). Thks a lot, Danilo

Good work, thanks for the report.

Similar Messages

  • The bookmarks toolbar is there but has no item buttons on it. How do I get the items back for this toolbar? Also would like to know if the toolbars can be put on the same line to make more room on the page (drag & drop) ??

    The bookmarks toolbar is there but has no item buttons on it. How do I get the items back for this toolbar?
    Also would like to know if the toolbar can be put on the same line to make more room on the page (drag & drop) ?? Like the menu & bookmarks toolbar could/should fit on same line. This would add more page view...
    Floyd Perry
    Thanks

    Check that you still have the "Bookmarks Toolbar items" placed on the Bookmarks Toolbar
    * Make sure that you have the "Bookmarks Toolbar" visible: "View > Toolbars"
    * Check in "View > Toolbars > Customize" that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
    * If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the Customize window onto the Bookmarks Toolbar
    * If you do not see the "Bookmarks Toolbar items" then click the "Restore Default Set" button
    You can only move the content from a toolbar onto other toolbars if all toolbars support that feature. You need to check that in the options of each toolbar.

  • I would like to know, on the ringtone page, where you can select songs out of your music library, is there a way to remove a song from the list after its selected? I would thin there would be a way to "delete" the songs from the list. (Clock app)

    I would like to know, on the ringtone page, where you can select songs out of your music library, is there a way to remove a song from the list after its selected? I would thin there would be a way to "delete" the songs from the list. (Clock app)
    Let me explain:
    In the clock app for ios 6.0.2 I am a little confused. It allows you to go into your music library, and create a ringtone using any songs you choose. However, I cannot find a way to remove a song from this list, just like I cannot delete one of the preset ringtones (which I'm not trying to do, but just as an example)
    Thanks for your time! If you need more information just ask.
    (I believe both my iPod and iTunes are up to date)

    I believe you just are able to delete them from iTunes.
    Hope it will be helpful

  • Goodnight. as you know apple has evolved considerably until today but there are people who do not have ability to buy new products. in my case I would like to know why the apple do not let the iphone 3g update to iOS 4.3 as are several applications that c

    goodnight. as you know apple has evolved considerably until today but there are people who do not have ability to buy new products. in my case I would like to know why the apple do not let the iphone 3g update to iOS 4.3 as are several applications that can not put on my iphone 3g due to this reason. Why does not Apple make a repository with applications for ios 4.2.1? or else do not work in an update to ios 4.3 on iphone 3g?

    This has nothing to do with Apple, as Apple does not make the apps.
    This is the decision of the app maker.
    Contact those app makers and ask them why they do this.

  • I currently use iCloud on a MacBook Pro. I opened my iBook G4 that I haven't used in several years and am unable to access my MobileMe account with many stored emails that I would like to transfer to the MacBook Pro. I have tried all of the passwords.

    I currently use iCloud on a MacBook Pro. I opened my iBook G4 that hasn't been used in years. I have many email messages that i would like to transfer to the MacBook Pro, but every password I use to access MobileMe is not accepted. Any suggestions on retrieving or transferring the emails?

    MobileMe was discontinued around 2 years ago.  Anything on the MMe servers are long gone. The MMe passwords are uselsess because MMe is no more.
    Unless you created an iCloud account back before MMe was taken off line you won't be able to recover any emails. 
    OT

  • If i buy i pad with retina display from dubai and take to india..i would like to know about the international warranty.

    I WOULD LIKE TO KNOW ABT THE INTERNATIONAL WARRANTY OF 1 PAD 4. I RESIDE IN INDIA. AND WOULD LIKE TO KNOW ABT THE INTERNATIONAL WARRATY IF I BUY IPAD RETINA DISPLAY( SOON TO BE LAUNCHED
    ) FROM DUBAI

    Not quite what I heard when I went into the Apple Store in Hong Kong yesterday.
    I have just bought an iPad in Hong Kong but will eventually be travelling back to the UK.
    Louis in the Apple Store told me that iPads without cellular have international warranty but those with cellular do not (as there are slightly different models for different carriers).
    But he was pretty cagey and essentially couldn't give a clear, straightforward answer. Which most Apple employees can't.
    It is now a grey area, at the discrection of each local Apple Store & is subject, it seems, to you paying the import duty as a possible get out clause.
    Look carefully but do tell us if you got this iPad reapired. Thanks.

  • I would like to know about the subtitles of movies...

    Hi!
    I'm from Greece an i would like to know about the subtitles of movies.
    Specially, how i can know that the movie i would like to buy or rent has greek subtitles?
    Thank you in advance

    I don't think there's a lot of technical information in those specs.  And most of these questions aren't straight forward.
    Easiest first, the color temp is around 5500-6000K, a little cooler than sunlight and will vary depending on power.
    The flash duration is a bit more vague and depends on when you draw the line (consider it to be off).  It can change the specs significantly.  The full power spec from Canon puts it at about 1/800 for the 580exII, but anyone who has tried to freeze motion at full power will tell you that's false.  I find it to be more like 1/200.  You can losely extrapolate the lower power times as flashes simply double duration to double power.
    Actually, I found this website that has some info on the 580II durations, which should get you in the ballpark for the 600.
    http://speedlights.net/2011/04/18/canon-speedlite-580ex-ii-flash-review/
    And David Hobby had a great article on it at Strobist:
    http://strobist.blogspot.com/2010/06/rise-and-fall-of-machines-understanding.html
    There's even more technical discussions you can dig up if interested.

  • HT1349 I would like to know if the power lock button is covered under warranty.

    I would like to know if the power lock button is covered under warranty.

    couple of quick questions, when was your purchase date I.E. are you within 90 days of purchase, if so i suggest calling iOS/iPhone support, as you're within your 90 days of complimentary phone service and they could answer the question along with getting everything set up to for a repair, either through mailing in, or with an appointment at your closest apple retail store. also, did you get the applecare+? that covers two incidents of accidental damage for about 49 dollars to replace, as opposed to the price of an uncovered replacement which can start at 4 times as much. if its not accidental damage, you should be covered.
    -full disclosure: these views/statements not endorsed/approved/etc by apple, just my own working knowledge from publicly available information.

  • When I replaced my PC desktop with a Mac Mini and hooked up my HP printer to it, I discovered my other computers on the Wi-Fi network could no longer access the printer.  The manual says Maverick OS will not allow PC's to access the printer. Any thoughts?

    When I replaced my PC desktop with a Mac Mini and hooked up my HP printer to it, I discovered that my other computers on the Wi-Fi network could no longer access the printer.  The manual says Maverick OS will not allow PC's to share the printer. Does anyone else have this problem?  My printer does not have on-board Wi-Fi but, otherwise, works fine.  I shouldn't have to buy a new one.  Is there a OS patch out there that would open the printer port for my PC computers?

    I'm assuming that on the Mac, the System Preferences -> Sharing -> Printer Sharing -> [X] HP printer -> Everyone can print is selected?  That is to say, the Mac will allow anyone to print using the printer, and that you did not try to restrict who can print.
    How is your network configured?  Bonjour as a protocol will NOT cross a router boundary.  If you have 2 or more subnets active with the PCs on one subnet and the Mac on another, that would block the PCs from seeing the Mac.
    You could have multiple subnets if you have more than one router, such as an ISP provided broadband modem/router and another WiFi Router.  If the PCs are talking to one router and the Mac is talking to another, that could be a 2 subnet situation.  The additional routers must be put into bridge mode, which is done differently depending on the router.  But the basics are to diable DHCP and NAT services on the secondary router(s) having just one active router on the network.
    Also, using Bonjour Browser on my Mac, it is showing me that the printer is being advertised as using Internet Printing Protocol, so if that is something selectable on Windows, maybe you can bypass Bonjour on Windows.

  • I am trying to play my digital music off a hard drive onto my home stereo.  I would like to know if the mac mini can just hook to my processor and play music through the processor(preamp) on my home stereo speakers?

    I currently have a nice home stereo component system.  I also have a 500 GB external hard drive loaded with music.  I am looking for a way to play the music off this Hard Drive onto my home stereo system.  I currently have a WD home entertainment box that I can play movies that I download off the Internet on my TV, of course piped through my home stereo for the sound.  I would like to know if the mac-mini could be used in this form also.  Just have the HD hooked to it, the TV would become my monitor and the mac mini would play the music ... RANDOMLY ... with the use of iTunes.  This of course would be hooked up to the home system with an hdmi cable and the HD hooked up through a USB connection.
    Just would like to know if this could work?

    Yes. Is the short answer.
    You can directly connect the speaker out port of the Mac mini to an input on the AV Receiver which then feeds your speakers. This would be an audio only solution. If you use a TOS-Link connection this will be a pure digital connection ensuring the best quality (important for audiophiles).
    You can if you wish connect the video from the Mac mini to the AV Receiver, and if you have a Mac mini with HDMI or a Mini Displayport you can run the audio and video via a single cable. (Older models would use two cables, the aforementioned TOS-Link pus a DVI to HDMI cable.)
    If you do connect the video output from the Mac to the AV Receiver you can then display this on your TV, and have as one possibility iTunes displayed with perhaps one of the iTunes visualisers playing along with the music. Another possibility would be to use FrontRow on the Mac.
    A different approach would be to have the Mac mini stream over a network to a device e.g. the Sonos Zoneplayer which is then connected to the AV Receiver. An AirPort Express is also able to do this.

  • I downloaded os x mountain lion not knowing that air play/mirroring wouldn't be compatible with my mac mini. i don't want this software anymore, is there a way i could get my money back?

    I downloaded os x mountain lion not knowing that air play/mirroring wouldn't be compatible with my mac mini. i don't want this software anymore, is there a way i could get my money back?

    Open App Store and sign in with your Apple ID. Click on the Support link under Quick Links on the right side.

  • I need to upgrade memory slots on my Mac mid 2010 up to 4 GB module which is currently 2GB with two different 1GB memory  slots.Is it compatible and would like to know about the cost?

    I need to upgrade memory slots on my Mac mid 2010 up to 4 GB module which is currently 2GB with two different 1GB memory  slots.Is it compatible and would like to know about the cost?

    this sub forum is about running windows on macs maybe you should try
    https://discussions.apple.com/community/notebooks/macbook

  • I'm from Brazil and I would like to know if the unlocked iPhone 5 which advertesed on the Apple Store webpage works fine in Brazil. Could someone from Apple please confirm that?

    Hello Apple Support Team,
    I'm from Brazil and I would like to know if the unlocked iPhone 5 which is advertesed on the US Apple Store webpage works fine in Brazil. Could someone from Apple please confirm that for me?
    Thanks in advance.

    The iPhone bought unlocked from the Apple store in the US will work in Brazil on GSM. Nevertheless the LTE frequencies might be different.
    Be aware that:
    You will NOT be able to order from the US Apple online store. You will have to go to a physical Apple store in the US.
    The warranty is only valid in the US and you will not be able to get warranty service in Brazil.
    With all of that, why not buy the iPhone in Brazil?

  • I would like to know about the iphone 5 unlocked

    I would like to know about the iphone 5 unlocked
    Dose it support lte 1800 ghz gsm
    Coz i am moving to kuwait and their lte provider is for gsm 1800
    Thank u

    You should be fine based on this...
    http://www.apple.com/iphone/LTE/

  • I'm using the i/o board 6501. I would like to know if the board drivers support borland C++ 6.0 if so, where I can find the good library

    I'm using the i/o board 6501. I would like to know if the board drivers support borland C++ 6.0 if so, where I can find the good library

    This thread deals with programming DAQmx with Borland C++ 6.0.
    Regards,
    Micaela N
    National Instruments

Maybe you are looking for