I think a firewall is interfering with my mail program - I can receive but not send. Please help!

I think Firefox may have installed a firewall that is interfering with my email program - I can receive but not send mail.
== This happened ==
Not sure how often
== Firefox updated with ALOT

Firefox does not install a firewall.

Similar Messages

  • I can receive but not send emails with my skynet account - what am I doing wrong ?

    I can receive but not send emails with my skynet account - what am I doing wrong ?
    I have no problems with my Yahoo account but I can not send emails with my skynet account.
    Actually in iPhone :
    Outgoing Mail Server > SMTP "relay.skynet.be"
    Primary server > Not Configured > Off
    Thank you ...

    When you set them up, did you set up both the incoming and outgoing email servers separately, and did you enter the correct SMTP server name, and enter your userid and password even though it says "optional"?
    Something else to try, if you haven't, is delete the accounts, connect the iPhone to iTunes, on the Info tab check the box to sync mail server settings, then sync. This should duplicate the settings from your computer to your iPhone.

  • TS3899 I can receive, but not send emails on iPad. All settings checked several times and with internet provider. imap settings confirmed as ok. Account deleted and set up under guidance of service provider several times - problem not solved - help!!

    I can receive, but not send emails on iPad. All settings checked several times and with internet provider. imap settings confirmed as ok. Account deleted and set up under guidance of service provider several times - problem not solved - help!!

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Using a POP account with multiple devices
    http://support.apple.com/kb/ht3228
    iOS: Adding an email account
    http://support.apple.com/kb/HT4810
    iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
    http://support.apple.com/kb/ht1694
    iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
    http://support.apple.com/kb/TS1944
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    How to Sync Contacts with Your iPad Using iTunes
    http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
    iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    iCloud: Create a group and add contacts to it
    http://support.apple.com/kb/PH2667
    eMail Groups - You can use a third party app that many users recommend.
    MailShot -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email  -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • Can receive but not send email from my domain mail account. Also have two mailboxes with the same name. One has an exclamation mark at the end. I'm unable to delete this mailbox.

    Mailbox duplicated with exclamation mark

    cape wrote:
    Setting up a Gmail account with Leopard Mail is trivial... (as long as you don't want to use IMAP, then it's a bit more involved).
    Why would you not want to run IMAP? Setting up Google IMAP with Mail (http://mail.google.com/support/bin/answer.py?answer=77663&topic=12761) or any other program (http://mail.google.com/support/bin/topic.py?topic=12760) is anything but trivial.

  • HT3529 I cannot send a text message to one specific friend when they have iMessage turned off. It should go through as a text message instead of an iMessage but they never receive it. It only happens with this one person and I can receive, but not send.

    Please help! I can't send a text message to one specific friend of mine when he has iMessage turned off. I can receive his texts, but he never receives mine. Both are iPhones, obviously, different carriers which shouldn't matter. Neither of us got new phones. MMS is on. All if a sudden it just happened. No major changes other than him turning iMessage off, due to a nosy brother who shares his iPad. What am I missing??

    I do have SMS on. What else could it possibly be?

  • I am having trouble with texting out.  I can receive but cannot send.  Any advice?  Carrier is ok.

    Hi!  I am having trouble texting out.  I can receive texts, but can't send any longer.  All settings are ok and carrier is ok.  Any advice?

    Hi text is a network service contact your network service provider . Cheers Brian

  • Cant send MMS messages with the new iphone4s. Can recieve but not send!

    Recieved an MMS message but cant send them.. Anyone else the same? Or help how to fix this please?! x

    you may need to enter the correct APN settings for your carrier.

  • TS1702 After I updated my new Ipad  with IOS 6, now Map& Dictation icon are not working. please help me

    After I updated my new Ipad  with IOS 6, now Map& Dictation icon are not working. please help me

    Thank you wjsten for your soon reply. Unfortunately on these days I'm in a country that Apple don't have any retail store here and for sake of time I prefer to fix it myself to DHL it to the nearest country to use its warranty. Do you have any idea how can I fix it? Do you think it's a software issue?

  • Hi im living in qatar and im ordering iphone 5s from online US apple store i wanted to know would unlocked iphone 5s work in qatar? and would i get t mobile nano sim with the iphone so i can activate my iphone ! please help..

    hi im living in qatar and im ordering iphone 5s from online US apple store i wanted to know would unlocked iphone 5s work in qatar? and would i get t mobile nano sim with the iphone so i can activate my iphone ! please help..

    No you won't. You can try, but your order will be canceled.
    But, yes, the phone is unlocked. But again, you won't be ordering one.

  • I am using OS X and some of my customers are not getting attachments sent with Apple mail. This is very frustrating. Someone please help.

    I am using OS X and some of my customers are not getting attachments sent with Apple mail. This is very frustrating. Someone please help.

    Run the 10.5.8 Combi Updater again, then reboot your Mac.
    The Combo updater of Leopard 10.5.8 can be found here:
    http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update

  • Can recieve but not send email with Airport

    Hi there,
    I'm currently using my mac to connect to the internet via an airport express configured on my partners powerbook, it all works fine to connect to the internet and to recieve emails through 'Mail' but i can't send any...
    Could anyone offer any advice on how to reconfigure my settings to allow me to use my emails properly?
    Incidently, the existing network connection i'm now using is through BT internet whereas my account is with virgin.net.
    Why can i recieve mail but not send?
    OK, hope someone can help...
    Thanks, steven.

    Without you being specific about your problem, I am guessing you have the same problem I had. You can look at the following
    http://docs.info.apple.com/article.html?artnum=75124
    or describe the error message that comes up when you send e-mail.

  • My iPhone4 docks correctly with some devices but not others, please help!

    Hi,
    Firstly spologies if this is old news but sometimes its easier to 're-ask' than trawl thousands of pages!.....
    I have a 3-year old iPhone 4 that has developed a problem which i'm trying hard to solve;
    *Phone used to dock fine with anything and everything - this was about 1 year ago.
    *for no apparent reason it ceased docking with my Bose Soundock and a Logic3 accessory dock (connected to a hi-fi) at home
    *symptoms were; it would charge and operate as normal whilst docked but would not play music through either (the Logic3 dock did not acknowledge it was docked). Otherwise it would sync and connect normally with iTunes, etc. and connected fine when plugged into my car.
    *I reset it, restored it from back-up, updated/reinstalled iOS (this has since updated at least twice) with no other effects. Also checked and reset all settings.
    *I subsequently bought a Pure Contour dock as I was able to try it in the shop and my phone worked with it, plus it has Airplay anyway. I have since, in an attempt to find a bedside DAB radio/alarm dock that works with it, found that it works fine with some devices but not others with no rhyme or reason as to which.
    *2 days ago I changed out the docking port myself using a cheap replacement bought from Amazon, to see if it would cure.
    * now the problem is reversed! The Bose and Logic3 docks I have, that it wouldn't work on before, it now DOES....and the Pure dock and my car, which it DID work with before now fail to connect with it!
    *just to reiterate this, my wife's gen3 and gen5 iPods dock and work faultlessly with all devices mentioned....and mine had done previously.
    to my knowledge it is NOT;
    - a compatibility issue. The phone used to work fine on everything I had. Then it stopped. How's that?!
    - a connector issue. The male connectors on all docks haven't changed.......and the female connector in my phone has changed from liking selected devices to then liking the others!! (it is female after all ;-) !)
    -a software issue. iOS has been updated and the phone wiped and restored and all sorts so many times I can;t see how it can be!
    could it be a problem with the data exchange between phone and device when it is docked??
    or do I really need to try changing the port for an 'official' one??
    or is it just broken and that's that?!

    It's either a problem with the connector on your phone (dirt, lint, bent pin, corrosion) or with its connection to the motherboard inside. Cleaning the connector is a good place to start; either a dry toothbrush, air blast can or wood toothpick. Next inspect it carefully with a good magnifying glass or jeweler's loupe. If nothing turns up it is probably damage inside, which will be difficult to fix. Aren't you due for an upgrade about now? Your iPhone 4 is 3 generations out of date!

  • System reboots with audigy2 value. get irql less than or not equil. please help new c

    hello my name is carlos
    my system reboots at random (more in games) with audigy 2 value..
    could someone please advise me on the problem i have with my new audigy 2 card. i would like to get it working and not have to get another card. i got this one because my onboard sound is so junky with midi music and has a poor s/n on recording. the blaster card seems to meet my expectations except for the reboots.
    i have read on forums about this same issue with ati video cards in the 9200+ range so i thought that might be the cause but i went back to the onboard audio and the problem went away.
    at random my system reboots. i get an error.. irql_not less than or equil or something like that and then it reboots. i let it submit to microsoft and they only say its a problem with a device driver. i have all the updated drivers for all my hardware at this point. i have all the windows updates as well. my xp is legal. i dont think its the power supply but.. could it be? the readings with my digital meter are normal. i have an older but quality digital multi tester. got it when in college. so i know its accurate. it reads 4.9 on 5 and 2.2 on 2. all this info because of the information i have read already. is the audigy a power hungry card? cause i dont get any reboots when i use the onboard sound and my ati video so what ever is going on it has something to do with the sound card.
    i cant find a newer driver on the driver site for it except for the beta. so i assume there is no updated driver for the card.
    i have a ups backup system. it has come on but it has never caused a computer hang when it has. its a 250 watt unit with plenty of battery backup. same battery backs up my ham radio equip. i am going to reinstall the card and see if in some chance it is munipulating the waveform to the supply. the power to the machine reads 22 volts.
    i have had some issues with the power company recently. they had to do some major repairs because i was having problems with flickers. but they fixed... [Show more]

    thank you for your reply to my problem.
    sorry i missed that detail in my information. that is one of the things i checked. video is on 6 and audio is on 7. i dont see any other devices sharing those irqs in the device manager irq information. or any other devices on same irqs or i/o
    before anyone mentions it i also have 3 fans sucking air. my case is actually an old server case with lots of vent holes in front and side. i was thinking of getting some of the slot fans and blowing on video and sound card. could this be the issue? the monitor app says my sytem temp is 82 degrees. 27 on processor.
    i appreaciate the input. i ran it all night last night with nero media player running with visulations on. the music was still playing but the video was locked up when i checked it this morning? nothing but mushrooms on my screen from the visulation. i dont know if something happened with nero (most likely this time) but thats the first time that error came up. the odd thing about this really is that it may go for hours and not do this but it seems to do it more when we play demanding games. i ran the machine yesterday for hours on my inverter (ups system) from the batteries with no problem. its output is just a little hotter than my house voltage 27 volts and my line volatage is about 9. but it may reboot before i get this post completed. it ran without problem for 7 hours with all the major games i have until the batteries ran down. (two high capacity 2 volt deep cycles on the outside deck)its really odd. its almost at random. at this point i suspect that i have a power supply problem of some sort. im gonna get a new supply by friday and see if that hel
    ps.
    i have to wonder who makes the best supply? anyone have any sujestions? perhaps whats really causing this is the capacitors in the supply cant sustain a clean output with the shaky power supplied by aep at my home. aep says that they fixed the problem but i still see flickers. i dont have any problems with the power on anything else in my home. im a little particular. lights that flicker bug me. its not a serious flicker just a slight diming that i have tried to catch with a dvm meter and cant. i have a 350 watts supply but its probably not the best made supply out there. i bought it at a local place that sells off brand computer parts. my fault i guess.. i've had it for maybe 3 years. i had a supply go bad back then and ruin a hard dri've on me. im bad for giving more info than needed but im just a yacker. thanks for the help..

  • Nearly there but not quite - Please help with display issue

    Hi,
    I had an issue with my mac starting which I resolved by replacing the graphics card. The mac now starts without issue BUT!
    In display preferences there is only one display resolution, no detect display button and if I try to calibrate the sliders have no effect
    I have tried resetting PRAM and SMC with no effect and also tried a different monitor
    Hardware Overview:
      Model Name:          Mac Pro
      Model Identifier:          MacPro3,1
      Processor Name:          Quad-Core Intel Xeon
      Processor Speed:          3 GHz
      Number Of Processors:          2
      Total Number Of Cores:          8
      L2 Cache (per processor):          12 MB
      Memory:          8 GB
      Bus Speed:          1.6 GHz
      Boot ROM Version:          MP31.006C.B05
      SMC Version (system):          1.25f4
      Serial Number (system):          CK******XYL
      Hardware UUID: *****
    ATI Radeon HD 5770: (Previously ATI Radeon HD 2600 XT)
      Chipset Model:          ATI Radeon HD 5770
      Type:          Display
      Bus:          PCIe
      Slot:          Slot-1
      PCIe Lane Width:          x16
      VRAM (Total):          1024 MB
      Vendor:          ATI (0x1002)
      Device ID:          0x68b8
      Revision ID:          0x0000
      ROM Revision:          113-C0160C-155
      EFI Driver Version:          01.00.436
      Displays:
    Display:
      Resolution:          1920 x 1200
      Depth:          32-Bit Color
      Core Image:          Software
      Main Display:          Yes
      Mirror:          Off
      Online:          Yes
      Quartz Extreme:          Not Supported
    Display Connector:
    Display Connector:
    <Edited By Host>

    Not everyone updates their hardware porfile but it should have been spotted that yours lists 10.5.8 which was a big clue and reason to ask and check what you are runnning.
    Apple sells 10.6.3. Unlike the prior two which did come out with 10.X.6 which would work and allow boot from DVD you may need the 10.6.8 on flash memory that comes with Lion except that is $69.
    We usually do but get tired now that we've been saying "ATI 5x70 needs 10.6.5 or later" when people upgraded their graphic card like you did.
    I wish that wasn't so. I don't know how ATI does it for Windows but they do have to retool their drivers when a new OS comes out but end up with a package that supports more than one OS version.

  • Problem with opening mail icon also rebooted  and wont open?  Please help!!!

    I have a new Ipad2  tonight I could not open mail ,it just showed a blank page.. Followed on line instructions to press and home and sleep buttons together for 15 seconds to reboot.. it has been 30 mins and is still rotating. cannot shut off or get home . please help!!!

    Did you hold the buttons down together until the Apple logo appeared on the screen? You have to wait until the Apple logo appears, it might take a little longer than 15 seconds.

Maybe you are looking for

  • How do I set up family sharing if all my family members emails are already associated with my iTunes account?

    I want to set up family sharing but it won't let me because all the emails are already associated with the one iTunes account we have.  I am afraid to delete because my children use that email address for text messaging.  How do I set up family shari

  • Item wise attachment in sales contract(VA41)

    Hello Expert, I have an requirement to attach risk assessment document in sales order contract item level. Anyone have experience on this? we can able to attach in header level but the actual requirement is item level. Regards, Vadamalai A.

  • How to schedule procedure in DBMS_JOBS?

    Hi, i have one stored procedure .. i want to schedule that procedure to run every 15 of the month at 2AM... plz help

  • Master-Detail form Problem

    Hi, I've made a Master-Detail form, but I'm getting a weird behavior... When I query a record from the master block it shows the rocords associated from the deatil block, but if I move to the deatil block and click on any field of the records queried

  • Select List Value

    Hi I have a Select List with Submit and I want to display the display text of the item. I can display the value like this: htp.p(:P5_MONTH_SELECT); But this gives me the item value(11) and not the text(November).. How can I display the text of this i