I think Bluetooth Setup Assistant is missing. Where did it go?

Just got a brand new late 2013 Retina Macbook Pro 13" and am having trouble syncing my Jambox. Usually I just find the Bluetooth Setup Assistant and re-pair it that way, but I can't find that. Is it missing in Mavericks? Possible to re-install?
Any other thoughts about why it isn't easier to pair my Jambox?
Thanks!

Restore iPhoto 9.5.1 from the last Time Machine backup you made before you upgraded to Yosemite.
If that is not possible, try, if you can install iPhoto from the main "Featured" tab of the App Store.  It may not be possible to reinstall from the App Store at all, since the current version is iPhoto 9.6 and you already purchased it.

Similar Messages

  • System will not boot - Arrives at 'Bluetooth Setup Assistant popup &

    A Bluetooth Setup Assistant (BSA) pop-up arrived on my screen looking for bluetooth mouse (which I do not have). It is in front of the log-in screen (I can just see it behind the BSA pop-up). I cannot get rid of it. The keyboard and mouse will not work and i cannot reach any of the system tools as the system has not booted. I tried (a) shutting off & restarting. But it always arrives at this same screen. (b) safe mode start with same result. (c) Command Option PR start with same result. (d)Then put in installation disk to start from disk (Holding down 'C') with same result. Now my installation disk will not eject (holding down mouse button on startup). (e) Also tried startup with firmware (Command-Option-O-F) with same result.
    Can anyone help get me round this original problem as well as finding a way of ejecting the installation disk?

    Note: I assume in the following that your mouse & keyboard are standard USB wired devices -- if not, please say so. Also, if yours are not Apple branded devices, please mention that too.
    It sounds like your keyboard & mouse are not being recognized as connected to your Mac so the OS is looking for Bluetooth devices as an alternate source of user input. If this is so, what may help is to unplug them & plug the keyboard into a USB port on your Mac (not on a USB hub attached to it) after restarting, when you see the BSA screen.
    If this doesn't work, try unplugging all other USB devices & repeat the above. If that doesn't work, you may have a defective keyboard or mouse. Check for that by substitution.

  • I'm trying to connect my Bluetooth JBL speakers to my Macbook Pro but it isn't working. I can't seem to find Bluetooth Setup Assistant because I updated my laptop. What should I do?

    I'm trying to connect my Bluetooth JBL speakers to my Macbook Pro but it isn't working. I can't seem to find Bluetooth Setup Assistant because I updated my laptop. What should I do?

    Make sure you set the speakers as discoverable, which usually involves holding down a button for a few seconds. Go to System Preferences / Bluetooth and you should be able to add it.

  • Bluetooth Setup Assistant is preventing me from logging on.

    I am currently using my older iMac in conjunction with my Macbook so that I can reply in Mail which is something I have not been able to do on my Macbook since downloading Mavericks in December.  (Yes, I've tried to fix that and have spent hours and hours and HOURS on it.) The older version of Mail on the iMac still works as it should, so I'm toggling between two computers.
    Now, however, when I turn on the older iMac the Bluetooth Setup Assistant window pops up before I can log in and tells me there is no wireless keyboard connected.  That would be because the keyboard and the mouse are both wired.  For a while, when I unplugged and then replugged them into the USB port, the Bluetooth window would disappear, but not anymore.  I have tried Alt-Apple-escape.... no luck.  I have tried reboothing the computer and holding down C.... no luck.  I have been able to activate the mouse (sometime yes, sometimes no), but it's unable to access the Blue Tooth window/box to close it, or log me in.  It just moves around.  The box/window the message is in is not accessible. I can't close it, minimize it or do anything else with it. 
    I have shut down all my bluetooth devices on my iMac, moved the wired keyboard closer (someone suggested that in an earlier post and although it didn't make sense if it's a wire connecting it); when I was able to log in earlier I closed the Bluetooth preference.... I don't know what else to do.
    I would really, really appreciate someone's help. I publish.  This is deadline. I'm very behind in my work.  I'm already jumping through hoops with the Mail issue.
    I don't remember the iMac's OS X and can't get in to see it because of the Blue Tooth window. This is the old computer I'm not supposed to have to use anymore....
    I found the OS X  It's 10.6.8

    If you're sharing the computer with your husband and you have separate accounts, you should open the Users & Groups preference pane, click the lock icon to unlock the settings, then click Login Options and check the box marked Show fast user switching menu... That will relieve the need for either of you to log out whenever the other wants to use the computer. Just select your user name from the menu next to the Spotlight (magnifying glass) icon on the right side of the menu bar.
    As for the Mail problem, try the procedure below first.
    Back up all data.
    1. Triple-click the line below to select it:
    ~/Library/Mail/Bundles
    Right-click or control-click the highlighted line and select
    Services ▹ Open
    from the contextual menu. A folder may open, or you may get an error message that the item can't be found. Either result is normal. If the folder does open and has contents, move the contents to the Desktop. Relaunch Mail and test. If there's no change, put the contents of the folder back and quit Mail again.
    2. Repeat with this line:
    /Library/Mail/Bundles
    This time you may be prompted for your login password when you remove the items. Make sure they're removed from the folder and not just copied to the Desktop. If necessary, copy them first and then move the originals to the Trash.

  • A LOT of my music is missing. where did it go and how do I get it back? so far i hate this version

    a LOT of my music is missing. where did it go and how do i get it back?  so far i really do not like this version of itunes.

    In a Finder window, right click on the window's tool bar, select Customize, and drag the Burn button to the tool bar.

  • LR4.1RC The Moiré brush is missing - where did it go?

    LR4.1RC The Moiré brush is missing - where did it go?

    To be clear in LR4.0 there is a Moiré in the develop module when you click on the adjustment brush at the top right. In LR4.1RC the Moiré option is missing. I'm guessing tis is a bug and that Adobe didn't intentionally remove it.

  • My iMac is frozen with Bluetooth setup assistance.

    My iMac is frozen with the screen showing Bluetooth setup assistance

    Hi Chris, do you have a USB Mouse & KB to test with?

  • My Library folder is missing-where did it go?

    My mail app has stopped working. It was suggested in another thread that I go to the mail folder in the Library folder and delete
    some items from the V2 file or folder. Problem is, I have no Library folder. Not there. Missing. Utterly confused. Searched all over the computer,
    and stil MIA. How does this happen. My HD was replaced earlier this week by Apple. Old one crashed and burned. Everything worked fine until last night.
    The mail won't open. Eberything else on computer works fine (so far). When I made a new folder and named it Library, box said name already in use. So this tells me it's hiding. How do I get it back. Any suggestions?

    OS X Lion: Where did my Library go?
    Drag it to the sidebar for easy access.

  • Audio Output Missing -- Where did it go?

    I recently installed Final Cut Express 4 on my G5 iMac, where I also have an older version 3 of FCP. I also have FCE4 installed on my G4 PowerBook. For some reason the audio output going to my speakers has disappeared when I'm playing an audio sequence in FCE4 on the G5 machine. I can see the VU meters blasting away, but nothing is coming out of the speakers. However, I get audio just fine in every other program app on the G5 machine including the FCP3, and the same audio clips play fine in FCE4 on the G4 PowerBook. I've tried imported audio clips and also training lesson files from the Apple Pro Training DVD which accompanies the training book series. I tried reinstalling FCE4 on the G5 machine and no luck. I'm running Leopard with all the latest updates on the G5 iMac, and Tiger on the PowerBook. It doesn't seem to matter whether I'm running the audio through the internal system speaker or through either of my USB external interfaces, the pattern is always the same - works OK in FCP3, doesn't work in FCE4 even though the VU meters are clearly getting a signal. I can even have FCP3 and FCE4 running simultaneously and the same sound file will play OK in FCP3 but not in FCE4. Any clues to what might be causing this? Have any recent system software upgraders within the past couple days had any problems like this?

    Thanks for the quick solution, Tom. I was able to get the internal audio to work, but not the USB as you indicated, which apparently FCP3 supports, but not FCE4. I couldn't get Firewire to work with my Alesis DAW Firewire interface, but I'm guessing it works via Firewire if you're feeding it back through the camcorder... haven't actually checked it out yet, though. You'd think Apple would easily support any CORE audio device. Wonder if this is just a marketing thing.
    Again, Thanks.

  • App Library missing- Where did it go?

    When I launch itunes there is a drop down menu on the left. The default selection is Music. I would expect that when I select the drop down that I could chose from Music, Movies, TV Shows, Podcasts, and Apps. Apps is missing. How do I get it back so I can use iTunes to manage the apps on my device.

    Thanks for the quick solution, Tom. I was able to get the internal audio to work, but not the USB as you indicated, which apparently FCP3 supports, but not FCE4. I couldn't get Firewire to work with my Alesis DAW Firewire interface, but I'm guessing it works via Firewire if you're feeding it back through the camcorder... haven't actually checked it out yet, though. You'd think Apple would easily support any CORE audio device. Wonder if this is just a marketing thing.
    Again, Thanks.

  • HT4461 My daughter was using our iPad and now the Mac App Store icon is missing - where did it go and how do I restore it back to the main screen?

    Need some assistance

    Welcome to Apple Support Communities
    I think you wanted to say App Store. Mac App Store is only available in Macs, not on an iPad.
    She probably enabled restrictions. Open Settings > General > Restrictions, and disable them by using the password she set. If she doesn't remember it, you have to restore your device to default settings in Settings > General > Reset > Erase All Content and Settings, losing everything stored in the device

  • C210M2 LSI MegaRAID has slot2 missing, where did it go?

    CIMC doesn't have any errors, just seems the Slot:2
    , SAS, HDD 135.972GB is missing in action
    See attached screen show from MegaRAID BIOS Config Utility.
    I have applied the latest host upgrade 1.3.1d.1

    I swapped a known good 146GB drive into that slot.  I then swapped the LSI MegaRAID card with a known good (I have a lot of spare parts:) and it seems to be the chassis drvie enclosure, which doesn't seem to be field replaceable. Calling TAC.

  • I downloaded photos under one account and they are now missing, where did they go?

    I put a program to download photos from my wife's phone on her account on our computer, downloaded the photos, and logged her off. When I came back to get them they were gone. She does not have an iPhoto library icon under her photos file. Can anybody tell me where these have gone or how I can retrieve them? They do not show up in my iPhoto when I open my account on the same computer.

    I thought it was impossible too. If there is sharing going on it had nothing to do with anything either of us have done (certainly not anything that could have been done accidentally - my wife has never used it yet and I haven't done anything out of the ordinary through experimenting).
    As I mentioned, my wife's account has no iPhoto library under her pictures folder. Maybe it doesn't come up until something is imported to it, but I have done that twice and still no iPhoto library folder has shown up on her account.
    The photos come up on hers right away, but as soon as I quit iPhoto or log her out, they disappear. They do not show up in my iPhoto when I open it. Instead they end up in a folder that is hidden through several folder layers as I mentioned before. I can't explain it. I am just happy that I found the pictures that I imported on her account.
    I would love for someone to see this and explain what is really going on, but alas, I can only hope that I am explaining myself well enough that others can hypothesize a reason for this.
    Any other feedback would be appreciated.

  • Permission popup at time of purchase missing - where did it go???

    Hi - I was getting messages last week that I could not access the Itunes store and purchase anything...for a few days. So, today, I decide to check it out and fortunately just clicked on one that I had stored in favorites.......and it started downloading. I just wanted to see if it was working again, and didnt really intend to buy it. I expected the popup that asked me the question of whether I wanted to purchase it and that I'm aware it would be deducted from my account......that didn't occur. Is there a way of getting that prompt to work again??? thanks

    Hi seyheynyc,
    Thank you for visiting Apple Support Communities.
    It appears that you are trying to delete messages in the Messages app, but you do not see the trash can icon in the bottom left of the screen.
    First make sure you're following these steps for Messages in iOS 8.
    Delete a message. Touch and hold a message or attachment, tap More, select additional items if desired, then tap .
    From:
    Manage conversations - iPhone
    If you follow these steps and do not see the expected results, try forcing the Messages app to close, re-open it, and try again. Here's how to force an app to close:
    Press the Home button two times quickly. You'll see small previews of your recently used apps.
    Swipe left to find the app you want to close.
    Swipe up on the app's preview to close it.
    From:
    Force an app to close in iOS - Apple Support
    If you still see the same behavior, restart your iPhone:
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    Best Regards,
    Jeremy

  • My 2008 imac takes 10 minutes to boot up as far as  Blurtooth Setup Assistant it then tries to find my  Bluetooth keyboard, mouse and trackpad - and fails! How can I get over this problem?

    My 2008 iMac takes 10 minutes to boot up as far as Bluetooth setup assistant. It then tries to find my Bluetooth keyboard, trackpad and mouse. (they are all fully charged. it  continues to try to find these items. what do I do next?
    from Brian Dowling.

    Post an EtreCheck report of your computer and we can look for obvious issues.

Maybe you are looking for

  • Moving photos from one album to the other

    I have the Iphone 5 using IOS 7.0.4, I want to move photos from one album to another. How can that be done? I have tried everything on the web and nothing works.

  • How to control a Load Balanced set in IaaS VMs using Text files

    Hi, I would like to control the Load Balanced nodes Using a resource to probe like active.txt  in IIS than a Endpoint on the Management Portal. The reason i need this is because the engineers in my team will have access to VMs but not to Management s

  • System.out will not flush before input

    Hello everyone, I am using Netbeans 5.5, JDK6, and J2EE. I am new to the environment so I wrote a test application that would prompt a user to enter a string and then echo it. I have: String str = ""; BufferedReader br = new BufferedReader(new nputSt

  • SDK VB Examples: JSOFindWordVB can't run properly

    Hi, I installed Adobe Acrobat pro 9, SDK705 and Adobe reader in a new computer, then I downloaded the SDK705, but when I try to run the JSOFindWordVB, it dumps. By debugging the codes, the code below causes the problem: gApp = CreateObject("AcroExch.

  • AV failing from Office to field staff Powerbooks.

    Hi all. First time poster on this forum. Great discussion. I see there has been ric, sharing and helping here disussions and user support Here's our Problem. Office with off site employers calling home with iChat (and iSight camersa on both ends DETA