I think I have all the settings right, why doesn't iCloud work?
I think I have all the settings correct, but nothing is happening. I post on calendar, it isn't on other devices. Contacts didn't showmupmeither.
Mail might be right. i can send mail from both, but how do I add folders? I cannot find directions anyplace.
My only problem right now is iCal. Nothing is syncing but I discovered I did not sign up for Mobile Me. Here is where my real problem comes in: I need a password to sign up for Mobile Me and everytime I put in a password, Apple won't accept it. I have changed my password 6 or 7 times today. When I get the new one, it will let me in to do that particular thing, but five minutes later, I try something else, and I get the error message. I KNOW what I'm putting in is correct.
10 minutes ago I changed my password. I checked in here at the discussions....got right in with the new password. Went to Mobile Me...get error message that this is the wrong password.
What do I do about this? It's been going on all day. I am trying to install iOS5 but I can't get in anything because of the password problem. I don't have a clue what to do. My warranty is off so I ca't call Apple for free and they charge a lot for phone help. Do you have any idea what the problem is with the password and what I can do to solve it?
Thanks so much.
Similar Messages
-
Why when I send messages from my iPhone to other IPhones, they come up green and not blue? I have all the settings on for I message b ut my number comes up grey and not black? Please someone help!
Hi evan191,
Thanks for using Apple Support Communities. This article has some steps you can try if your messages aren't sending as iMessages:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
If you still can't send or receive iMessages
Ensure that iMessage is turned on in Settings > Messages.
To send and receive iMessages, your device must have a valid cellular or Wi-Fi data connection.
iPhone: Troubleshooting Cellular data
iOS: Troubleshooting Wi-Fi networks and connections
iMessage registration validates your Apple ID for use with iMessage. If you are unable to activate iMessage, follow this article.
If an iMessage cannot be sent, it will be resent using SMS or MMS, depending on the content. You can turn this behavior on or off in Settings > Messages > Send As SMS. Carrier messaging rates may apply.
Verify that the Apple ID or phone number is listed in Settings > Messages > Send & Receive.
Cheers,
- Ari -
I recently bought a lightning to 30 pin adapter for my new iPad so that I could continue to use my 30 pin to VGA cord, but when I plug the VGA cord into it it says it is not supported. They are all apple products, so why doesn't it work?
If it is a lightning to 30 pin adaptor, and you have a 7th Generation Nano it has to fit the Nano.
This is lightning to 30 pin adapter: http://www.bestbuy.com/site/Apple%26%23174%3B---Lightning-to-30-Pin-Adapter/6651 936.p?id=1218803450821&skuId=6651936#tab=overview
Is this what you bought?
You need to contact Sony and see if they model you have is compatible with the docking adapter. It may not be. -
For some reason the masking layer is not working in my CS6. I know have everything set correctly! Please help.
Hard to guess on this type of question at you are not offering any tip on what you are doing. A screen shot might help to see how you have things set.
-
What am I missing?
Check your computer against these requirements:
OS X Mavericks- System Requirements
Macs that can be upgraded to OS X Mavericks
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps. -
How can I get the scroll to work?
Thanks for replying!
It's something else to try! I am quite savy, just frustrated over what should be a simple update!!!!!
I did however try and install iTunes 10.7 on a different computer, which is clean as I ran anitvirus on it this morning, prior to downloading itunessetup.exe and it did the same thing on there too.
Having spent nearly two days trawling the internet for help I am beginning to wonder if it is not a problem with 10.7 itself? Seems like quite a lot of people have the same issues as me....and it can't be the same thing on everyone's computer!
I will try the antivirus on my laptop and go from there!!!
Thanks again for your answer. -
I have all the settings done properly for the podcasting app, but I am not getting all my podcast daily, especially the ESPN shows. The date of the shows are the dates in August, but after downloading, they show a date for 01/01/12. Anyone else have this problem?
I also download the podcast that I want and then 5 minutes later it says that this podcast is temporarily unavailable. I "Remove Podcast" and then select "Download Podcast" again and it downloads it. If I play it right away I get to listen to it. If I wait 5 minutes the Faffing thing is gone again.
-
I have all the settings correct, the few that there are. I have searched for help in documentation and tutorials but have found nothing about this? When I slide the DV 16:9 videos into the menu and then play them, they are 4:3. I am stuck at the last step. Has anyone heard of this? Thanks
I don't have the need to make many DVDs. I was doing this for someone who's grandfather, a D-Day veteran was featured in one of the videos for the website of the newspaper where I work. It turns out that the DVD looks right on the widescreen TV, but not on my monitors. I could not find an answer to something that apparently was not a problem in the first place. I learned a lot from the various discussions and will be reading more of them, more often in the future.
-
Hi guys can someone help with a query regarding the 'podcast app' why do they not have all the episodes that relate to one show available why only half or a selected amount
THanks...but some days they have all the episodes right back to the very first show...ive downloaded a few but they are only available every now and then which makes no sense...why not have them available the whole time ??
-
I have set my daughter up her own Itunes on my pc but, despite all the settings being right and having logged in on her own account it will not sync music. the first time she tried it wiped any music off that is on there and now will go through sync but music is still not syncing to the ipod. it also shows on the bar at the battom as audio content being there but wont appear.
- Restore from backup. See:
iOS: How to back up -
new airport: can't get my macbook or my imac to join my wireless automatically, my other stuff still joins without problems but i have to join manually with the book and the imac ?? I've tried all the settings and every thing else I can think of.....
Running on Lion, never had a problem before until the old airport died and I replaced it.try connecting the device in _*recovery mode*_, then restore from your backup.
also, make sure [_*Apple Mobile Device Service*_|http://support.apple.com/kb/TS1567] is installed and started.
JGG -
My ringer is no longer working for text and email notifications. Only working for phone calls. I have gone through all the settings to see where something is off. Not finding anything. I have tried changing the tone and it just vibrates on everything.
Ok so I happened to figure it out while on the phone to apple support. Even though the guy was very nice, I think I knew more than him! He was explaining very basic resolution principles I played about. I had the second option in displays resolution. All I did was unplug the HDMI cable, click on 'best for display' then plugged the HDMI in and my resolution on the normal monitor changed to the normal blue, then went black momentarily and then changed to a strange resolution but another window appeared that said SONY BRAVIA HDMI at the top! Hey presto! Don't know why it didn't do it yesterday - I probably left the HDMI cable in or something! Oh well. Problem solved!
-
i am not able to hear any sounds of games on the speaker. Though the sounds function on the head fones. The speaker works perfect in other applications except games.Have checked all the settings but not able to fix it.
Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound. Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and its the icon; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085
If that doesn't solve it then try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
I can still receive icloud ( ME email address) emails fine. I have not changed my settings at all. I have however tried all the settings I can find on the support pages. PLEASE HELP. Nothing has changed. This suddenly just started happening around a month ago. To frustrate me apple does not seem to have a support email or any method to contact them with this issue to do with their email product. I have spent ages going through the apple support sites and I keep getting asked for an apple product to mark it against. I have no apple product as I am using a PC but I am accessing and using their email product. Is there even a phone number I can call? Surely there is a support area for their Email server issues. Can anyone help? It is driving me mad and causing me major issues. My outlook is Outlook 2010 on a windows 8 PC. As I have said it worked fine then one day decided to stop sending emails.
Thanks for your help.Hi - this problem is discussed here:
https://discussions.apple.com/thread/5375046?start=0&tstart=0 -
I want to update or upgrade my iphone 4 to 5.0 or 6 higher how can I do this ? I my unable to sign into Itunes I was told to reset all the settings to "factory" If I reset evevything ,will I loose all my contacts, emails, notes, or any other information that I have saved into my phone (photos, apps, emails, ) Just as if I had a brand new phone ? I am not very experience with computers or high tech devices I would have a difficult time uploading on my computer or tranfering data
Don't reset anything, just connect it to iTunes. If you don't have iTunes on a computer, then find someone who does, turn off auto sync, then connect your iphone and click 'check for updates'. iTunes will download the update, then update that software to your phone. Before you update though, I'd make a backup, just to be on the safe side.
Maybe you are looking for
-
Problem installation Adobe AIR, and i need your help
This is my log file please help me! Performing runtime install UI SWF load is complete UI initialized starting user confirmation Installation type: new starting install Scheduling runtime installation operations uninstall scheduled for 1.0.5, 1.0.4,
-
Installed Adobe Creative Suite 6 Design on a Computer That No Longer Works
I purchasesd a copy of Adobe Creative Suite 6 Design & Web Premium for school a while ago and had it on my laptop. Recently, my computer wont start up, i just wont work. I had no idea it was going to happen, so I didn't have the chance to uninstall i
-
SP4 and CSS: Entries in VOBTBL.DAT
Hi, I'm at the replicator's end of Authoring. We have the problem that customers provide us with DVD masters created with SP using CSS that have only one entry in the vobtbl.dat. According to the CSS spec every vob file needs an individual entry. Thi
-
Runtime error "raise_exception" "check_failed"
Hi, It would be great if anyone could provide solution for the issue stated below. whenever the SAP system is restarted we are getting a dump in st22 RAISE_EXCEPTION. username: SAPSYS, CLIENT 000 TYPE: C Error analysis A RAISE statement in the
-
File opened in external editor not stored with referenced files
If I open a referenced raw file in an external editor (CS2) and work on the image adding layers etc., the image is not stored where I have all the other referenced files. It gets stored in the Aperture Library. Is there a way around this. I want to k