I think I have solved the "Stand" problem!

I was having an issue where the Apple Watch wouldn't recognize times that I would stand (or have other activity) in the Activity app. After trying everything, I finally reset the watch ("erase all content and settings" in the Watch app). After setting up the watch (as a new device) the watch hasn't messed up once in reciting "stand" data. Give it a shot...
At the very this makes me think that the problem is a software one which can be fixed with a software update down the road.

This depends on when Nikon gets around to updating the drivers. It's Nikon's responsibility, not Apple's or Adobe's. Unfortuantely Nikon doesn't have a stellar record of supporting their software or drivers on OS X.
In the meantime you can always shoot JPEG and import that into Aperture. If you shoot NEF+JPEG you can import just the JPEGs into Aperture now, and later on import the matching NEF files. You could also use ViewNX2 to convert the NEF files to TIFF. At least until Nikon gets around to updating their drivers for the 7100 for Aperture & PSE.

Similar Messages

I think i have solved the battery drain

like many of you i have been plagued with the battery drain issue after 3.1.2.
i believe what is causing it is mobile safari.
we know that w/3.0 an anti-phishing feature was added and by default it is turned on settings>safari>fraud warning.
the way it is supposed to work is you connect to wifi>plug into charger> open up safari> and turn screen off. it is supposed to download the anti-phishing database while the unit is "off" and charging.
i believe part of it is broken.. i believe it is downloading even when it is not plugged in.
this explains all the symptons all the "cures"
what i did last nite was to follow apples directions turned on wifi-plug into charger-open up mobile safari and turned off screen.
to test i went to a known phishing site: tinyurl.com/ratju4 the anti-fraud warning popped up - the database downloaded.
since 6 am this am - i've been out for a run- used the gps to track it and listened to music at the same time, spent 1/2 hour reading emails and google reader @ breakfast since 6 am i have 1 hour 40 minutes of usage and 3 hours 12 mins of standby and 73% left on the battery meter
i assume if you turn off the antifraud feature you will get the same beneftits

Ok, so is this only a issue if you charge your phone by the wall charger? I normally always charge my phone through the USB cable on my iMac.
And I too would like to know if there's a way to find out if the database has been downloaded or not.
How long does it take to download the database after you have connected via wifi, turned on safari and locked the screen?
I don't see any anti-phishing settings anywhere in the settings menu. So would turning the
fraud warning to "off" do the same thing?
I'm really hoping that this works because the battery drain is a huge pain in the butt, and Apple seems to be completely unwilling to replace my phone. They say they don't replace phones for software issues or problems caused by software(even when it's their software!). Load of bollocks if you ask me.

I think I have all the settings right, why doesn't iCloud work?

I think I have all the settings correct, but nothing is happening. I post on calendar, it isn't on other devices. Contacts didn't showmupmeither.
Mail might be right. i can send mail from both, but how do I add folders? I cannot find directions anyplace.

My only problem right now is iCal. Nothing is syncing but I discovered I did not sign up for Mobile Me. Here is where my real problem comes in: I need a password to sign up for Mobile Me and everytime I put in a password, Apple won't accept it. I have changed my password 6 or 7 times today. When I get the new one, it will let me in to do that particular thing, but five minutes later, I try something else, and I get the error message. I KNOW what I'm putting in is correct.
10 minutes ago I changed my password. I checked in here at the discussions....got right in with the new password. Went to Mobile Me...get error message that this is the wrong password.
What do I do about this? It's been going on all day. I am trying to install iOS5 but I can't get in anything because of the password problem. I don't have a clue what to do. My warranty is off so I ca't call Apple for free and they charge a lot for phone help. Do you have any idea what the problem is with the password and what I can do to solve it?
Thanks so much.

I think I have opened the sobig.f virus in my hotmail account and it keeps seding emails to my contacts. How do I stop it, and will it effect any of my other transactions like internet banking/shopping, is it safe?

I think I have opened the sobig.f virus in my hotmail account and it keeps seding emails to my contacts. How do I stop it, and will it effect any of my other transactions like internet banking/shopping, is it safe To continue using my ipad ?

This isn't due to malware. There is no known malware capable of infecting an iPad that has not been jailbroken (ie, hacked to allow apps from outside the App Store).
As lizdance40 says, your Hotmail account has been hacked remotely. Change the password immediately. Hotmail accounts are popular targets, but as long as you choose a good password, and make sure that password is not the same as a password you use with any other account, you should be safe.
I disagree with lizdance40's statement that you have to abandon the account and create a new e-mail address. If a hacker is able to get back in even after changing the password, the problem is not with the account itself. There's another vulnerability of some kind somewhere. Perhaps the account allows hackers to leave a "back door" to get back in (such as with GMail's delegation feature), in which case any such feature needs to be reviewed and have settings changed. Perhaps you are checking mail in an insecure manner while on an insecure network (ie, a wireless network that requires no password). Perhaps you are using a password on multiple accounts, and a different account has been compromised. Perhaps a hacker has used knowledge gained by prior access to your account to achieve "social hacking" (ie, convincing a tech to give him access because he has "forgotten the password"). There are many scenarios, but there's no good reason to abandon the account entirely.

I bought iphone 4 in US and i and other person not able to listen properly because on the time of conversation voice cracking and difficult to understand each others.so i would like to request you that please solve the above problem.i love my iphone.

Sir,
I bought iphone 4 in US.last 6 month me and other person not able to listen properly the voice because the voice is cracking.i have called earlier about the above problem and they said to upload the new verson 6.1.3 and it will be done but after loading this version still i am facing the same problem.so ,i would like to request you that please solve the above problem as soon as you can.I will be thankful to you.i love my apple Iphone.
waiting for your earliest reply.
thanks
Rajeev Gupta

Hello sir
As you know about my iPhone 4 which has a problem of voice cracking so I would like to replace to other phone like IPhone 5s.I will pay the replacement charges immediately.i am reaching miami on 19th of janvary 2014 so I would like to request you please arrange my appointment on the Apple store,dadeland mall ,miami at 15.00pm as I will reach miami at 13.00pm and my flight to India at 19.00pm.
Last time you told to replace at miami on 26th of September but without oppoimtment they have not entertained me.so I would like to request you that please arrange my appointment this time
I will be thankful to you
Rajeev Gupta

How to solve the setColor() problem with multithreading?

My fractal program uses a custom number of threads to draw the complete image. If I use just 1 thread, the image looks clean, if I use more threads some pixels of the image gets other colors. The problem ist the painting code:
g2d.setColor(col);
g2d.drawLine(x, y, x, y);as it is necessary to first set the color of the graphics object and then draw the line. I can solve this pixel color problem by synchronizing the Graphics2D object:
synchronized (g2d) {
g2d.setColor(col);
g2d.drawLine(x, y, x, y);
}but this slows the code down to times where just 1 thread is calculating the image. Unfortunately, I can't find a draw() method that has a color parameter.
I tried to divide the panel into multiple BufferedImages (1 for each thread) which solves the pixel problem but only the first BufferedImage get's drawn.

I solved my problem now. My solution is to use a separate BufferedImage for each Thread. I still had a bug where i didn't transformed the x/y coordinates of the complete image to the shifted x/y coordinates of the single BufferedImages, so that the threads draw the image out of the visible area which looked like all threads after the first only had a black image. After adjusting teh coordinates, the fractal now gets drawn correctly. And boy it's much faster with multiple threads - even on single core systems. On a dual core system, using 10-20 threads about doubles the performance as both cores have work almost all the time until the fractal is finished. :-)

I have downloaded 2 rented movies. I can find then in my downloads but can not find then in iTunes. I read the others that have had the same problem an I can't find the rented in iTunes

I have downloaded 2 rented movies. I can find then in my downloads but can not find then in iTunes. I read the others that have had the same problem an I can't find the rented in iTunes

Hey rangermikegsm,
Welcome to Apple Support Communities.
It sounds like you’re concerned because you don’t see your rentals in iTunes, but they appear to have downloaded. Take a look at the article below and check the Rentals tab in iTunes on your MacBook.
About renting movies from the iTunes Store - Apple Support
Find movies you rented previously
Find your movie on the device you used to rent it.
On a Mac or PC: Go to the Rentals tab in the Movies section of the iTunes Library.
On an iOS device: Go to the Rental tab of the Videos app.
Using Apple TV (2nd or 3rd generation): Look in the top shelf of the main menu.
Ciao,
-Jason

After updating to OS X Mavericks, internet USB dongles topped working. Many other users have faced the same problems.

After updating to OS X Mavericks, internet USB dongles topped working. Many other users have faced the same problems. Can someone please help me out? I am unable to find online help.

Sourcing Drivers for dongles when upgrading OS is a nightmare whether its osx or windoze. It takes the likes of Huawei ages to produce new versions. I strongly recommend getting a portable wifi (mifi) which will work with any device and sits in your pocket not sticking out the usb port where it gets broken. Recommend Huawei E5756

How do I solve the memory problem ( 5 beeps ) upon startup?

hp compaq d530SFF, how do I solve the memory problem (5 beeps ) upon start up?

Hi:
You already know the answer to that!
http://h30434.www3.hp.com/t5/Desktop-Lockups-Freezes-Hangs/when-I-try-to-boot-up-lighs-flash-red-and...
Paul

Will the next IOS update 5.0.2 solve the batter problem of my iphone 4s?

will the next IOS update 5.0.2 solve the batter problem of my iphone 4s?

Let me check my Magic Eight Ball..... All signs point to "Yes"
All kidding aside, We all hope so!!

When apple will solve the wifi problem ?

when apple will solve the wifi problem ?

They keep trying, but haven't yet in all the time OS X has existed. Every version of OS X has had some WiFi issue with some group of users. The normal pattern is they release a fix for one group, and another group develops a new WiFi problem.

HT6114 I think I have started the download. How do I know how long my download will take?

I think I have started the download. How do I know the status of how much time is remaining?

Take your internet download speed, example 2 mbits/sec
Divide by 8 is 250kBytes per sec
Mavericks is 5GBytes, so 5,000,000,000 divided by 250,000 is 20,000 seconds or 5.5 hours.
Now substitute your internet speed.

TS1559 WIFI solutions proposed by Apple are not working. Does oneone how to solve the WIFI problems?

Dear Apple.
I was really happy with my iphone4s, IOS 6.0, great product amazing quality and posibilities BUT.......
I updated from IOS 6.0 to 6.1.1. and the WIFI nightmare started.
I waited for a new update to fix the WIFI problems and I updated my iphone 4s from 6.1.1. to 6.1.2. in order to solve these problems related with WIFI connections.
But IOS 6.1.2. is even worst:
- WIFI is not working at all. So I cannot download apps greater than 50MB.
- Battery life is shorter than ever.
- 3G goes in and out every minute.
- When you operate the iphone4s you can realize that is hotter than before.
These problems are unnaceptable and inconsistent with a high quality standard product.
You can read a lot of blogs, I am not the only one.
Please give us a solution as soon as possible.
Best Regards
AICITEL

Thank you for your support.
My router is a TL-WR740N, and I think it has only a 2.4-2.4835GHz antenna.
So it seems that I have to keep on trying.
I also tryed to rename the router, still nothing.
Thank you anyway.
FYI.
4 puertos LAN de 10/100Mbps
1 puerto WAN 10/100Mbps
Botón
Botón de configuración rápida de seguridad
Botón de reinicio
Suministro de Energía Externa
9VDC / 0.6A
Estándares Inalámbricos
IEEE 802.11n*, IEEE 802.11g, IEEE 802.11b
Antena
omnidireccional fijo de 5dBi
Dimensiones (Largo x Ancho x Alto)
6.9 x 4.6 x 1.3 in. (174 x 118 x 33 mm)
Frecuencia
2.4-2.4835GHz
Velocidad de Señal
11n: Hasta 150Mbps (dinámico)
11g: hasta 54Mbps (dinámico)
11b: hasta 11Mbps (dinámico)
EIRP
<20dBm(EIRP)
Sensibilidad de Recepción
130M: -68dBm@10% PER
108M: -68dBm@10% PER
54M: -68dBm@10% PER
11M: -85dBm@8% PER
6M: -88dBm@10% PER
1M: -90dBm@8% PER
Funciones Inalámbricas
Activar / Desactivar radio inalámbrica, WDS Bridge, WMM, estadísticas inalámbricas
Seguridad Inalámbrica
64/128/152-bit WEP / WPA / WPA2,WPA-PSK / WPA2-PSK
Tipo WAN
IP dinámica / IP estática / PPPoE /
PPTP (Acceso dual) / L2TP (Acceso dual) / BigPond
DHCP
Servidor, cliente, lista de cliente DHCP,
Reserva de dirección
Calidad de Servicio
WMM, Control de Ancho de Banda
Redireccionamiento de Puertos
servidor virtual, Port Triggering, UPnP, DMZ
DNS Dinámico
DynDns, Comexe, NO-IP
Puerto de Transferencia VPN
PPTP, L2TP, IPSec (ESP Head)
Control de Acceso
Control Parental, Control de Manejo Local, Lista de anfitriones, la Lista de acceso, manejo de reglas
Seguridad Firewall (cortafuegos)
DoS, SPI Firewall
Dirección IP Filtro / Filtro de dirección MAC / filtro de dominio
Conexiones de direcciones IP y MAC
Management
Control de acceso
Manejo Local
Manejo remoto
Certificación
CE, FCC, RoHS
Contenido del Paquete
TL-WR740N
1 fijo antenas omnidireccionales
Fuente de alimentación
CD de recursos
Guía de instalación rápida
Requisitos del Sistema
Microsoft ® Windows ® 98SE, NT, 2000, XP, Vista ™ o Windows 7, Mac ® OS, NetWare ®, UNIX ® o Linux.
Ambiente
Temperatura de funcionamiento: 0¿ ~ 40¿ (32¿ ~ 104¿)
Temperatura de almacenamiento: -40¿ ~ 70¿ (-40¿ ~ 158¿)
Humedad de funcionamiento: 10% ~ 90% sin condensación
Humedad de almacenamiento: 5% ~ 90% sin condensación

Nokia have solved the probem about n96?

the slide problem of n95 and n95 8g and n81 is so terrible!
if u use it for long time the slide will be loose and not comfortable!
i want to know whether the nokia can solve the problem in n96?
the samsung's phone does not have the slide problem!
but i wish nokia can solve it,if they can the nokia will be much better!!!!
Do better than the best!

i've heard of this problem " the jerky slider" before, but as far as i know and read around the net, late production units were equipped with a better mechanism.
in fact i've seen some pictures around of the improved mechanism "i'll try to locate those ".
it's obvious that it's too early to judge the N96, but i think that the sliding mechanism in nokia slides is improving with each new model , just take a look at the N80 and the 6110 navigator "big big difference"
Fear not those who argue but those who dodge

Hi I have a newish MBA approx 1 year old that was running mountain lion. I think i have deleted the entire system and any partitions it boots and says no bootable drive when i try cont R it starts internet recovery but just sits there

Hi during playing around with my MBA i think i have despite all the warnings deleted everything from my laptop. I do not have a back up or usb start up. when i boot the laptop it says no bootable device found, i have tried various configerations of alt cntr r etc the best i can get it to is a spinning grey globe that says looking for internet connection. it does not see my wifi so i do have a usb-rj45 adapter that if i plug into the R/H side usb port lets it see the internet (i think) it then brings up a down load bar but this never moves and in the end brings an error nummber up i think it was -0007 or -0002.
Do i have to buy new mountain lion or usb start up stick
I have access to a windows PC (not mac) so can use this to create a usb if someone helps an idiot out
thanks Martin

I had just finished backing everything up and was about to hit the wipe button when I found a solution that worked for me: here: https://discussions.apple.com/thread/4144252?tstart=0
It gdisk to be installed, and a bit of terminal knowledge, but it fixed the problem for me. For this step:
add partion 5 to the MBR
It was partition 4 for me. You should first use gdisk's 'p' command to find the number of your bootcamp partition, and then use that number.

I think I have solved the "Stand" problem!

Similar Messages

Maybe you are looking for