I think I just fried my Tungsten - Help
This is my first time and I looked at the different topic and did not see anything related to this topic.
Can someone tell me if I just fried my Tungsten?
Went to Sync with my laptop and pluged in my phone charger in the sync port.
Yea I know.
I can not get the Tungsten to sync with either my laptop or desktop.
Any ideas
thanks
jlbowen
Post relates to: Tungsten E
Oh! Now I understand... If the phone charger plugged into your TE just fine, you probably didn't damage it, as the TE's connector is a good ol' industry standard mini-USB connector, found on many devices. (e.g. cameras, *phones*, etc)
Go for a reset. Unless you intentionally do it, you should retain all data.
"When in doubt, reboot!" (except its 'reset' in this case)
A reset frequently remedies some HotSync problems.
webosnation.com is another option for help.
Similar Messages
-
So it's the little thin ipod with no screen...that has the usb thing and the landyard. Whenever I try restoring it it tries to restore and then a message pops up. There is an error that reads "The ipod cannot be restored. An unknown error has ocurred (1442)". The lights blink orange and green simultaneously...and it just won't restore. help?. I have literally tried restoring it like 10 times and nothing happens. When i connect headphones it does not hear and that little light think happens....which i had never seen happen before. I need to fix it. ....please help....if i take it to an apple store....will it cost alot to fix that?
reset utility should help...for mac
http://www.apple.com/support/downloads/ipodresetutility103formac.html
for windows
http://www.apple.com/support/downloads/ipodresetutility104forwindows.html -
have reformatted my Imac using original discs (installed leopard (10.5)) tried to do the software update but it cant download the itunes update and when it gets to the configure update screen after restart for main update, it just gets stuck. HELP!
The configure bar gets about an 1/8 full and then just does nothing. I think its lists the update as combo update? cant remember with out checking.
I have tried to do the disk verify and repair but this has made no difference.
Please let me know what i need to do, I have reformatted the mac just to start over as was clogged with a lot of useless data, I had installed lion (10.7) from the app store previously and now cant seem to find a way to re install lion. I hope I dont need to pay for it again?If you erased your hard drive, you'll need to reinstll OS X 10.6 Snow Leopard to access the App store. You won't have to pay for OS X 10.7 Lion again. Did you try booting to the recovery partition by holding the command and r keys down? If that's still there, you can reinstall OS X 10.7 from there.
If you're looking to install the current iTunes, you need OS X 10.6.8 at a minimum.
If you're still trying to update OS X 10.5 Leopard, you can download the combo update from here. Download, use Disk Utility to repair permissions, apply the update, then repair permissions again. That will take you to OS X 10.5.8. -
EMERGANCY! i think i just broke my ipod by changing the settings
Hi, im a little stuck with something.
I bought a laptop and my music is in iTunes on my home computer and alot more is on my laptop. I don't want to have to upload all that music on my new laptop as there is tons and some of it I don't have the CD to anymore.
ok so i followed itunes suport instructions by making my ipod not automatically upload songs from my home pc...so then i tried to connect it to my dell laptop and it didnt work so then i kinda gave up and then i pluged it back into my home computer and it didnt register that my ipod was pluged in either... its the original 15gb no click wheel and it took me forever to work and save up enough money to buy it... im stuck and i definately cannot afford to buy another one....i feel as if im gonna die...
my ipod is my life and i think i just messed it up
please help me!!Calm down!
Go through the 5 R's on this page:
http://www.apple.com/support/ipod/
retest after every step and stop once you get it working. Post again if that does not fix your issue. -
Hi,
I have an iTouch. I'd like to download some free apps. but I have a debit card but would like to download apps from the store. how do I do that? I can't possibly get a credit card just for this. please help.I really do not think it is the iPad or your network connection. Other users have reported this very same issue. Try this and see if it works for you - it may not work - but it's easy to try - harmless - and it has worked in the past for others.
Try signing out of your account and restart your iPad.
Go to Settings>Store>Apple ID and tap the ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. Go back to Settings>Store> Apple ID and sign in again. -
My MAC MINI looses the wi-fi connection to a Belkin N wireless router when it goes to sleep or shuts down. I have to re select the network when re starting or waking up the computer. I think this just started with LION. My iPod and iPad have no problem remembering the wireless network.
Thank you BGreg. That is what I have been doing, and then it works just fine. I think it was doing the same thing in the previous version of Lion. I may be incorrect about that. I upgraded to 10.7.3 a few weeks ago, and then last week I reloaded the combo update, hoping it would help. Not so. Thank you for letting me know it is a common problem. I have tried permissions in Disk Utilities, and in Macaroni, both at least 4 times, plus numerous restarts. Nothing Improves. It still can not find the internet when it wakes up or gets up.
-
My messages app won't open, after I sent a large iMessage. I think it just has too much data on it. What can I do other then reset my iPhone?
Hi everyone, I had this problem but none of the solutions above worked. What happened with me, and with others in other forums, is that a particular thread or message was causing the problem. I'd go to open the message and all I'd get was a white screen with the blue bar at the top. So, I went into contacts, pressed 'send message' to a contact whose message wasn't causing the problem, then I pressed back to messages. You then swipe to the left on the thread that's causing the problem, and delete it. Sadly this means you will lose all that person's messages, but you can try opening it from there and deleting it on the thread. Didn't work for me though. Hope that helps! It was the only thing that worked for me after about three days of total frustration and resetting!
-
I bought Lightroom 5 separately but when I try to install it I am told I need another number. I think I just bought an upgrade version. How do I get the original?
Thanks for no help... but for anyone else, turn off itunes match on the ipod
-
After updating to ios 7.1 with my iphone 4 my apps wont update it just loads then stop help please
after updating to ios 7.1 with my iphone 4 my apps wont update it just loads then stop help please
Reset your iPhone. Hold the on/off and home buttons together for about 10 seconds till the Apple logo appears.
If you continue to have issues, try downloading the apps to iTunes on your computer, then sync your iPhone using iTunes. -
Whenever I try to open an app on my Mac it just bounces on my dock and then settles. At first it bounced the disappeared, and then I had to reinstall it, but now it just bounces. Any help?
Try one or more of the following:
> Restart Your Computer
> Uninstall and Reinstall iTunes
> Reset iPod (nothing will get deleted)
> Look in My Computer (Windows 98, XP) OR Computer (Windows Vista or 7) and see if your iPod is in there.
In some cases (and this happened to me before) plug your iPod in and out your computer a few times. It should get it going. If not, then I strongly recommend starting your computer. -
I've connected my device through a wifi network and i accidentally signed out my apple ID for imessage then when I signed back in i cant seem to get connected though my wifi connection is working just fine. can anybody help me?
I am having the same problem with my ipod nano
I have been trying since Xmas -
Just bought a mac air with OS X v.10.7 Lion, for work I need to read and write NTFS drives, I install MacFuse and NTFS-3G, but it can not mount (recognize?) External HDD, in my MBP with Snow lepard it work just perfectly... help please.
Reinstall MacFuse with the one from http://www.tuxera.com/mac/macfuse-core-10.5-2.1.9.dmg. If that doesn't work, you can use Paragon NTFS for Mac 9.0 which has been designed to work with Lion.
-
Just bought a mac air with OS X v.10.7 Lion, for work I need to read and write NTFS drives, I install MacFuse and NTFS-3G, but it can not mount (recognize?) External HDD, in my MBP with Lion it work just perfectly... help please.
Sorry in my MBP Snow lepard it work.. don't have Lion In MBP
-
My Itunes will not open/ lauch on my desktop. There is no systems error message etc. It just will not open, help?
reset utility should help...for mac
http://www.apple.com/support/downloads/ipodresetutility103formac.html
for windows
http://www.apple.com/support/downloads/ipodresetutility104forwindows.html -
Air-lap1142n Is it dead or just in need of help?
Hi,
I have a number of air-lap1142n-e-k9 access points, so far they have all been deployed successfully aprt from this one unit.
When I deployed it, it joined the wlc as normal, downloaded the image, and I was able to rename it etc.. but then a couple of min's later it's status changed to down. It's details on the wlc had changed to name: blank, mac address 0000.0000.0000
I've tried restarting it a couple of times with no luck, below is the output from the console:
Press RETURN to get started!
*Mar 1 00:00:06.711: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
*Mar 1 00:00:06.722: *** CRASH_LOG = YES
Security Core found.
Base Ethernet MAC address: 50:3D:E5:BE:E8:F8
*Mar 1 00:00:08.683: ERROR: wait 3 failed
*Mar 1 00:00:09.190: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1
*Mar 1 00:00:09.199: Unsupported radio found of type 0
*Mar 1 00:00:09.236: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log (contains, 1024 messages)
*Mar 1 00:00:10.295: %LINK-3-UPDOWN: Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:11.374: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:11.419: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1140 Software (C1140-K9W8-M), Version 12.4(21a)JHB1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Wed 11-Aug-10 15:45 by prod_rel_team
*Mar 1 00:00:11.419: %SNMP-5-COLDSTART: SNMP agent on host AP503d.e5be.e8f8 is undergoing a cold start
*Mar 1 00:13:37.040: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Mar 1 00:13:37.040: bsnInitRcbSlot: slot 0 has venus radio(UNSUPPORT)
*Mar 1 00:13:37.055: bsnUnlockDevice: not bring radio up: radio 0 is in admin disable state
*Mar 1 00:13:37.232: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Mar 1 00:13:37.233: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:13:37.235: Writing radio coredump to 'flash:/r0.rcore'
*Mar 1 00:13:37.407: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Mar 1 00:13:38.239: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Mar 1 00:13:48.469: %DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0 assigned DHCP address 172.31.44.41, mask 255.255.252.0, hostname AP503d.e5be.e8f8
*Mar 1 00:13:49.264: Interface Dot11Radio0: not starting because stop-on-failure set
*Mar 1 00:13:55.919: Interface Dot11Radio0: not starting because stop-on-failure set
*Mar 1 00:13:56.289: Logging LWAPP message to 255.255.255.255.
*Mar 1 00:13:59.364: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
*Mar 1 00:13:59.385: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:14:00.384: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Mar 1 00:14:00.384: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.255 started - CLI initiated
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (192.168.134.251) (192.168.70.51)
*Mar 1 00:14:06.925: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP.
*Mar 1 00:14:06.930: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER
*Mar 1 00:14:16.931: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*May 19 08:07:23.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.18.1.40 peer_port: 5246
*May 19 08:07:23.000: %CAPWAP-5-CHANGED: CAPWAP changed state to
*May 19 08:07:23.778: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.18.1.40 peer_port: 5246
*May 19 08:07:23.778: %CAPWAP-5-SENDJOIN: sending Join Request to 172.18.1.40
*May 19 08:07:23.779: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*May 19 08:07:28.778: %CAPWAP-5-SENDJOIN: sending Join Request to 172.18.1.40
*May 19 08:08:05.436: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
*May 19 08:08:23.000: %DTLS-5-SEND_ALERT: Send WARNING : Close notify Alert to 172.18.1.40:5246
*May 19 08:08:23.040: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*May 19 08:08:23.041: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*May 19 08:08:23.041: bsnInitRcbSlot: slot 0 has venus radio(UNSUPPORT)
*May 19 08:08:23.046: bsnUnlockDevice: not bring radio up: radio 0 is in admin disable state
*May 19 08:08:23.077: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*May 19 08:08:24.077: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*May 19 08:08:33.055: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*May 19 08:08:33.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.18.1.40 peer_port: 5246
*May 19 08:08:33.000: %CAPWAP-5-CHANGED: CAPWAP changed state to
*May 19 08:08:33.785: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.18.1.40 peer_port: 5246
*May 19 08:08:33.786: %CAPWAP-5-SENDJOIN: sending Join Request to 172.18.1.40
*May 19 08:08:33.786: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*May 19 08:08:38.786: %CAPWAP-5-SENDJOIN: sending Join Request to 172.18.1.40
I've tried re-imaging the AP a couple of times, with no luck. Is it dead or just in need of help?
Any ideas.
Thanks
DylanHi,
We are hitting the software bug and the bug ID is CSCsz56711
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsz56711
The issue is related to PCI componenet on the AP hardware and log that points to that is..
bsnInitRcbSlot: slot 0 has venus radio(UNSUPPORT)
The Replacement is the resolution and please contact your reseller or partner and if ur are the partner then RMA ids the resolution..
Lemme know if this answered ur question and please dont forget to rate the usefull posts!!
Regards
Surendra
Maybe you are looking for
-
Upgrade from Windows 7 to Windows 8 - Help!
Hello, Previouslly I asked how to downgrade my HP ENVY dv7-7332ea from the windows 8 to the W7 you can see this post I made " http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/HP-ENVY-dv7-7332ea-Downgrade-to... ". So now with the
-
Cannot install itunes. get error message program RSVCR80 not installed. windows error 126.
cannot update or install itunes. ger error message RSVCR80 not installed. windows error 126.
-
Message keeps popping up PLEASE HELP!!
Hi, I tried to send a message with a pdf attached and the file was too big to send. Now a message keeps popping up that says: ""Some actions taken while the account "Gmail" was offline could not be completed online. Mail has undone actions on some me
-
How to find link between Business partner and Org unit in Solution manager
Hi experts, Please!!! I have a requirement where my rule finds business partner assinged for that support team and in transaction ppoma_crm we have org unit assigned to that business partner number below that we have positions and user assigned... I
-
Problem Loading Photos into iPhoto
I recently started downloading my pictures from my digital camera into iPhoto 5. I don't like deleting the pictures from my memory card because I print them from my card and also download them to other computers. Every time I plug in my camera it goe