I think I need help with driver (software) settings for D110a

Question

I think I need help with driver (software) settings for D110a all-in-one
Product: D110a all-in-one
OS: Windows XP Professional
Error messages: None
Changes before problem appeared: None--new installation
The quality of photo images (mostly JPG files) in printouts is awful even though the files display beautifully on the PC screen. I am using
IrfanView software for displaying/printing. As far as I can tell, IrfanView is not the problem.
When I print the same images on a Deskjet 5150 attached to a different PC also running XP Pro and IrfanView, the quality of the printouts is at
least acceptable, Some would probably say good or very good.
It's dificult to explain in words the problem with the printouts. A picture of really pretty vegetables (squashes, tomatoes, watermelon, etc) comes
out much too red. Moreover, the red, which appears shaded on the screen, seems to be all one shade in the D110a printouts.
Something similar happens to a view of a huge tree in full leaf. On screen, there are subtle variations in the "greenness" of the leaves. In the
printout, all green is the same shade. In the same printout, the trunk of the tree is all a single shade of grey. It isn;t even obvious that the
trunk is a round, solid object.
I liken the effect to audio that disappears entirely when you lower the volume and gets clipped into square waves in even moderately loud passages.
I don't know whether the D110a driver software permits adjusting the parameters that appear to be set incorrectly, and if adjustments are possible,
how I would identify which parameters to adjust, how I would access them, or how I would adjust them. I'm hoping that someone can help. Thanks.
I forgot to mention that I have used the diagnostic application and it tells me that there are no problems.
e-mail me at [email protected]

Answer 1

brazzmonkey wrote:
Hi everyone,
I noticed the following message when network starts on my gateway
Warning: This functionality is deprecated.
Please refer to /etc/rc.conf on how to define a single wired
connection, or use a utility such as netcfg.
Then I realized the way network settings should be written in rc.conf has changed. But I can't figure out how this should be done.
Currently, my set up is the following (old way):
INTERFACES=(eth0 eth1)
eth0="dhcp"
eth1="eth1 192.168.0.10 netmask 255.255.255.0 broadcast 192.168.0.255"
ROUTES=(!gateway)
eth0 is on DHCP because the IP is dynamically assigned my ISP.
eth1 has a fix IP because it's on the LAN side.
No problem to use DHCP on eth0 with the new settings.
But for eth1, I don't know what I am supposed to write for gateway.
Wiki isn't clear on that one either, and it looks like many articles still refer to the old way.
Any guidance appreciated, thanks.
brazzmonkey,
you can't define 2 interfaces the old way (even though I saw some tricky workaround somewhere in the forums).
Use, f.e., netcfg:
Comment your old lines.
In /etc/rc.conf insert:
NETWORKS=(Eth0-dhcp Eth1-static)
DAEMONS=(..... !network @net-profiles ....)
In /etc/network.d create 2 files:
First one is named  Eth0-dhcp.
Contents:
CONNECTION="ethernet"
DESCRIPTION="Whatever text"
INTERFACE=eth0
HOSTNAME="your hostname"
IP="dhcp"
DHCP_TIMEOUT=15
Second one is named Eth1-static.
Contents:
CONNECTION='ethernet'
DESCRIPTION='whatver'
INTERFACE='eth1'
HOSTNAME='hname'
IP='static'
ADDR='192.168.0.10'
GATEWAY='192.168.0.1' # your gateway IP
DNS=('192.168.0.1') # your DNS server
The names Eth0-dhcp and Eth1-static are not magic. They just must be the same in rc.conf and in /etc/network.d.
Hope it helps.
mektub
PS: netcfg must be installed.
Last edited by Mektub (2011-07-20 14:07:05)