I think it doesn't work!
My iPod went out, its not off but the screen is blacked out, when i plug it in to my com, it doesn't have the "do not disconnect" message and it doesn't show up in iTunes.
Have you tried resetting it?
http://docs.info.apple.com/article.html?artnum=61705
Similar Messages
-
i recently lost my 3rd Gen iPod and ive been using find my iPhone to send messages to it, my email then instantly tells me that it had been displayed or it suonded off however it doesn't find the iPod's current location. you guys think this app actually works? i feel like my alerts are just bouncing back at me. please help. Thanks!
... AFAIC Location Services is a joke.
With both devices sitting side by side on my kitchen table, Location Services has NEVER shown the devices to be any where close to each other, and at times Location Services has been as much as a 1/4 of a mile off between the two devices.
Your iPod Touch has no GPS receiver so determining its location relies upon wireless routers whose location is known. Its "location" is actually that of a wireless router. Your iPhone 4 can use GPS, cellular triangulation, and Wi-Fi. One would think GPS would be most accurate but urban areas have a greater density of cells and GPS signals are easily obstructed so cellular triangulation is often more accurate.
Therefore the two devices' locations can be expected to be different. Differences of a quarter mile are easily explained if you understand how location services works: http://support.apple.com/kb/HT1975
Skyhook Wireless (I think Apple uses its own database now): http://www.skyhookwireless.com/howitworks/
Location Services is not a "joke"; its intended use is for basic navigation and for such applications as determining where the nearest restaurant is. It cannot tell you that your iPod is under the couch cushions and that your iPhone is in the car. -
Touch thinks it is a camera and doesn't work - please help!!
I've looked at the other threads posted here but nothing seems to work. My Touch is still recognised in the Device Manager as a camera and the screen on the Touch itself still thinks that I need to connect the USB cable to my Touch, even though it is already connected. I've tried updating the drivers with the driver in the C:\WINDOWS\system32\DRVSTORE\ folder, but that doesn't work either. Any other tips please?
lol you guys must be macking around with those cracks on the Internet...try to put your iPod to recovery mode and it should be fine, follow this:
- Make sure the phone/touch is on. The phone/touch must also be docked or plugged in to your USB cable.
- Press and hold the Power and Home buttons on the phone until the screen shuts off.
- Release the Power button immediately. Keep pressing the Home button.
- You should see a number of horizontal lines invade the now-off screen, and it will be slightly disturbing. If you just see just flat blackness turn your phone back on and try again.
- Your computer will recognize an "Apple Restore (DFU) Device". Open iTunes and it will complain about needing to restore.
- Now just restore and everything will be back to normal. -
i have 3 computers. i want to get files from one to another. it doesn't work, i think it is a problem with the apple id?
Roger:
Zugriffsrecht means Access Right according to the translators.
martinamm:
You can't do what you want with iCloud. You will need to setup remote access to your main computer with VPS or some similar remote access application. With VPS you have an application running on your main computer turning it into a server and an client app on your laptop so you can access it remotely. There are many such apps out there, some probably more feature filled than VPS. You might post in the system forum that you're running and ask there.
OT -
I have Iphone 4 it was work fine in my country (bahrain) i went to UK and i change sim card to O2 and when i came back it doesn't work in my country i think because i update the carrier in Uk its my carrier now 10.0 and the others in my country is 9.0
We had the same problem, but figure out the solution.
You MUST have at least 1 song added to your ITUNE! After you add a free song, then everything else should work as normal!
Hope this helps! -
Help. My home button doesn't work. I've to press it several times to get it to function. The phone has 4 months. I've already update software, restarted and calibrated it. I was thinking to go to the service. Has 1 year hardware warranty. Suggestions?
There's another thread with similar problems.
https://discussions.apple.com/thread/2595841?start=510&tstart=0
I wouldn't suggest it though, since it may void your warrantee. Apple will replace it if you bring it in. The genius bar guys aren't too bright, well most of them. But they'll go through the usual diagnosis steps then issue you a replacement if they have them in stock.
I have to admit, Apple has one of the best replacement services that I've ever experience. If you're familiar with costco, the return/exchange process is very quick and painless. -
How much will Apple charge me to have my Ipod Touch 4g fixed? It won't turn on anymore more because I think the battery is probably bad, and the home button doesn't work either... its not under any warrenty either.
Apple - Support - iPod - Repair pricing - http://www.apple.com/support/ipod/service/prices/
-
My iPhone 5 speaker suddenly doesn't work properly! The volume is so low I can't hear the phone ring. I've restored and updated and done everything I can think of. Please help!
Sorry, I think you got scam.
Last thing you can try is restore as new:
http://support.apple.com/kb/HT1414 -
please help me my iphone doesn't work.
Sorry, but the warranty on the iPhone is country-specific (or, in the case of an EU iPhone, specific to the EU). An Australian iPhone can be serviced only in Australia. You'll have to ship it to someone you know back in Australia to take or send it to Apple or an authorized service center. Once repaired, if you're going to be living in Italy for any length of time, I'd suggest selling the iPhone to someone in Australia and purchasing on there in Italy so you have local service and support.
Regards. -
I have downloaded it again but still doesn't work. I want Lightroom and it keeps saying I need this to download it.
1.If internet is fine then this might be becase of Creative cloud files, please try the steps metioned in http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launchin g-cc.html and see if it works.
2.Please navigate to ~/Library/Application Support/Adobe/OOBE/opm.db and trash it. Try to launch CC desktop and sign in with your Adobe Id (http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-f iles.html) .
{Note for step 2: The file is in the user Library, not the Applications folder. To see the hidden user Library (not the system Library) in the Finder click on the Gomenu item and then hold down the Alt / Option key. You will see Library appear between Home and Computer. Click onLibrary and then navigate toApplication Support > Adobe > OOBE.
Alternatively open the Terminal and paste in the following and then press the Enter / Return key:
rm ~/Library/Application\ Support/Adobe/OOBE/opm.db, This will also delete the file}
Other related threads:
http://forums.adobe.com/message/5468864 (spinning blue wheel)
http://forums.adobe.com/message/5469306
Hope it works.
Regards,
Rajshree -
Self-assigned or Manually Assigned IP Doesn't Work.
I've got a network of four Macs in my house, using a wireless router from Verizon. This network has been working fine for at least a year. For the last week, though, my MBP can't access the internet or see other computers. My router recognizes the MBP and the MBP shows full bars for the wireless signal, but other than that, nada. This is true whether it's a self-assigned IP or I manually create the IP (using the IP address that the router recognizes as the MBP).
The MBP hasn't left the house. The entire network set up has not changed.
I have tried:
- Manually setting the IP - worked briefly last night, but now doesn't work again.
- Resetting nvram - didn't work at all
- Power cycling computers and router in all possible permutations
- I may have tried other things that I'm not thinking of now
Any fixes or info on why this kind of thing happens would be greatly appreciated.cmoorhead wrote:
For the last week, though, my MBP can't access the internet or see other computers.
You might try resetting your connection settings using the steps listed in this message:
http://discussions.apple.com/thread.jspa?messageID=10695921&start=1
They're not guaranteed to solve the problem, but they'll only take you a minute or so to try. -
View works in Solaris in 1 minute but doesn't work in WIn2003
We have a view is badly written. Other than the non-searchable conditions like '%*%'. What else is wrong:
CREATE OR REPLACE FUNCTION anycon_p(neid NUMBER, joinaid VARCHAR2, sdf NUMBER, nodetype NUMBER ) RETURN N
UMBER IS
fromid NUMBER :=0;
BEGIN
if (nodeType=302 or nodetype = 303 )then
select count(1) into fromid from JS_CM_TP tp where (tp.ne_id=neid)
and (tp.tp_joinaid = joinaid) and (tp.tp_sdf = sdf) and (tp.crs_emlkey is not null);
elsif (nodeType=307)then
select count(1) into fromid from JS_CM_TP tp where (tp.ne_id=neid)
and (tp.tp_joinaid = joinaid)and (tp.tp_sdf <= sdf)
and (tp.tp_sdf+2 >= sdf)and(tp.crs_emlkey is not null);
elsif (nodeType=308)then
select count(1) into fromid from JS_CM_TP tp where (tp.ne_id=neid)
and (tp.tp_joinaid = joinaid) and (tp.tp_sdf <= sdf)
and (tp.tp_sdf+11 >= sdf)and(tp.crs_emlkey is not null);
end if;
RETURN fromid;
EXCEPTION
WHEN NO_DATA_FOUND THEN
RETURN 0;
END;
CREATE OR REPLACE VIEW JS_QUERY_FAC_AVAIL_VW AS
SELECT
tp.NE_ID NE_ID,
ne.NE_NAME NE_NAME,
tp.SHELFAID shelfaid,
c.CARD_TYPE cardtype,
tp.TP_AID tpaid,
tp.TP_TPTYPE tptype,
tp.TP_RAWPST tppst,
tp.TP_JOINAID pmaid,
c.CARD_RAWPST cardpst,
tp.TP_TACCID tacc,
CASE
WHEN c.CARD_RAWPST LIKE '%OOS%' THEN 'PM-OOS'
WHEN tp.TP_RAWPST LIKE '%OOS%' THEN 'FAC-OOS'
WHEN (tp.TP_LPBKCMD IS NOT NULL) AND (tp.TP_LPBKCMD NOT LIKE '%NONE%') THEN 'FAC-LPBK'
ELSE 'IS-NOT CONNECTED'
END AS reason,
tp.TP_FACTYPE AS factype
FROM
JS_NM_NE ne,
JS_CM_CARD c,
JS_CM_TP tp
WHERE
ne.NE_ID = c.NE_ID
AND c.NE_ID = tp.NE_ID
AND tp.TP_JOINAID = c.CARD_AID
AND c.CARD_RAWPST NOT LIKE '%UEQ%'
AND (tp.TP_DV_NODETYPE='300')
AND (tp.TP_TPTYPE ='DGR')
AND (tp.TP_RAWPST LIKE '%OOS%'
OR c.CARD_RAWPST LIKE '%OOS%'
OR (tp.TP_LPBKCMD IS NOT NULL AND tp.TP_LPBKCMD NOT LIKE '%NONE%')
OR tp.CRS_EMLKEY is null)
AND (tp.TP_TACCID IS NULL OR tp.TP_TACCID LIKE '%0%')
UNION ALL
SELECT
tp.NE_ID NE_ID,
ne.NE_NAME NE_NAME,
tp.SHELFAID shelfaid,
c.CARD_TYPE cardtype,
tp.TP_AID tpaid,
tp.TP_TPTYPE tptype,
tp.TP_RAWPST tppst,
tp.TP_JOINAID pmaid,
c.CARD_RAWPST cardpst,
tp.TP_TACCID tacc,
CASE
WHEN c.CARD_RAWPST LIKE '%OOS%' THEN 'PM-OOS'
WHEN tp.TP_RAWPST LIKE '%OOS%' THEN 'FAC-OOS'
WHEN (tp.TP_LPBKCMD IS NOT NULL) AND (tp.TP_LPBKCMD NOT LIKE '%NONE%') THEN 'FAC-LPBK'
ELSE 'IS-NOT CONNECTED'
END AS reason,
tp.TP_FACTYPE AS factype
FROM
JS_NM_NE ne,
JS_CM_CARD c,
JS_CM_TP tp
WHERE
ne.NE_ID = c.NE_ID
AND c.NE_ID = tp.NE_ID
AND tp.TP_JOINAID = c.CARD_AID
AND c.CARD_RAWPST NOT LIKE '%UEQ%'
AND ((tp.TP_DV_NODETYPE='302' AND tp.tp_tptype='DGR'
AND((tp.tp_rawpst NOT LIKE '%UAS%') OR(tp.tp_joinaid NOT LIKE 'EPMX24%')))
OR(tp.TP_DV_NODETYPE='303' AND((tp.tp_rawpst NOT LIKE '%UAS%') OR
(NOT EXISTS ( select null from JS_CM_TP tp1
where (tp1.ne_id = tp.NE_ID)
where (tp1.ne_id = tp.NE_ID)
and (tp1.tp_sdf = tp.tp_sdf)
and (tp1.tp_dv_nodetype = '302')
and (tp1.tp_rawpst not like '%UAS') )))))
AND (tp.TP_RAWPST LIKE '%OOS%'
OR c.CARD_RAWPST LIKE '%OOS%'
OR (tp.TP_LPBKCMD IS NOT NULL AND tp.TP_LPBKCMD NOT LIKE '%NONE%')
OR (NOT EXISTS ( select null from JS_CM_TP tp1
where (tp1.ne_id = tp.NE_ID)
and (tp1.tp_joinaid = tp.tp_joinaid)
and (tp1.tp_sdf = tp.tp_sdf)
and (tp1.crs_emlkey is not null) ) ) )
AND (tp.TP_TACCID IS NULL OR tp.TP_TACCID LIKE '%0%')
UNION ALL
SELECT
tp.NE_ID NE_ID,
ne.NE_NAME NE_NAME,
tp.SHELFAID shelfaid,
c.CARD_TYPE cardtype,
tp.TP_AID tpaid,
tp.TP_TPTYPE tptype,
tp.TP_RAWPST tppst,
tp.TP_JOINAID pmaid,
c.CARD_RAWPST cardpst,
tp.TP_TACCID tacc,
CASE
WHEN c.CARD_RAWPST LIKE '%OOS%' THEN 'PM-OOS'
WHEN tp.TP_RAWPST LIKE '%OOS%' THEN 'FAC-OOS'
WHEN (tp.TP_LPBKCMD IS NOT NULL) AND (tp.TP_LPBKCMD NOT LIKE '%NONE%') THEN 'FAC-LPBK'
ELSE 'IS-NOT CONNECTED'
END AS reason,
tp.TP_FACTYPE AS factype
FROM
JS_NM_NE ne,
JS_CM_CARD c,
JS_CM_TP tp
WHERE
ne.NE_ID = c.NE_ID
AND c.NE_ID = tp.NE_ID
AND tp.TP_JOINAID = c.CARD_AID
AND c.CARD_RAWPST NOT LIKE '%UEQ%'
AND tp.TP_DV_NODETYPE IN ('307')
AND (tp.tp_aid not like '%-P-%')
AND (tp.TP_TACCID IS NULL OR tp.TP_TACCID LIKE '%0%')
AND (tp.TP_RAWPST LIKE '%OOS%'
OR c.CARD_RAWPST LIKE '%OOS%'
OR (tp.TP_LPBKCMD IS NOT NULL AND tp.TP_LPBKCMD NOT LIKE '%NONE%')
OR (NOT EXISTS (select null from JS_CM_TP tp1
where (tp1.ne_id = tp.NE_ID)
and (tp1.tp_joinaid = tp.tp_joinaid)
and (tp1.tp_sdf <= tp.tp_sdf)
and (tp1.tp_sdf >= tp.tp_sdf-2)
and (tp1.crs_emlkey is not null) ) ) )
UNION ALL
SELECT
tp.NE_ID NE_ID,
ne.NE_NAME NE_NAME,
tp.SHELFAID shelfaid, c.CARD_TYPE cardtype,
tp.TP_AID tpaid,
tp.TP_TPTYPE tptype,
tp.TP_RAWPST tppst,
tp.TP_JOINAID pmaid,
c.CARD_RAWPST cardpst,
tp.TP_TACCID tacc,
CASE
WHEN c.CARD_RAWPST LIKE '%OOS%' THEN 'PM-OOS'
WHEN tp.TP_RAWPST LIKE '%OOS%' THEN 'FAC-OOS'
WHEN (tp.TP_LPBKCMD IS NOT NULL) AND (tp.TP_LPBKCMD NOT LIKE '%NONE%') THEN 'FAC-LPBK'
ELSE 'IS-NOT CONNECTED'
END AS reason,
tp.TP_FACTYPE AS factype
FROM
JS_NM_NE ne,
JS_CM_CARD c,
JS_CM_TP tp
WHERE
ne.NE_ID = c.NE_ID
AND c.NE_ID = tp.NE_ID
AND tp.TP_JOINAID = c.CARD_AID
AND c.CARD_RAWPST NOT LIKE '%UEQ%'
AND tp.TP_DV_NODETYPE = '308'
AND (tp.tp_aid not like '%-P-%')
AND (tp.TP_TACCID IS NULL OR tp.TP_TACCID LIKE '%0%')
AND (tp.TP_RAWPST LIKE '%OOS%'
OR c.CARD_RAWPST LIKE '%OOS%'
OR (tp.TP_LPBKCMD IS NOT NULL AND tp.TP_LPBKCMD NOT LIKE '%NONE%')
OR (NOT EXISTS (select null from JS_CM_TP tp1
where (tp1.ne_id = tp.ne_id)
and (tp1.tp_joinaid = tp.tp_joinaid)
and (tp1.tp_sdf <= tp.tp_sdf)
and (tp1.tp_sdf >= tp.tp_sdf-11)
and (tp1.crs_emlkey is not null) ) ) )
WITH READ ONLY;If you think anybody's going to be able to point out flaws in that code you're mistaken. Well, maybe somebody with time on their hands will go through it but I doubt it.
But given your subject the real point of enquiry ought to be, what is the difference between your Solaris set up and your Windows environment? And what do you mean by
doesn't work in WIn2003please describe observed behaviour, including error messages if appropriate.
Cheers, APC -
Home Sharing doesn't work on my iMac (2013)
Hi,
I have an iMac 2013, all my music and movies are on it.
Home Sharing is enabled.
I have the iMac, an iPhone, an iPad and an Apple TV all on the same network, sponsored by a Time Capsule.
None of the 3 devices can connect to the iMac library. The Apple TV doesn't see it. When I add the library in the Remote app of the iPhone and iPad, I have to enter the code in iTunes but then after the app is "looking for the library" without finding it.
The main reason was for me to load my movies from the Apple TV in my living room, but it doesn't work as it can see the Home Sharing. I can though AirPlay the iMac on the Apple TV (so definitely on the same network).
Any idea? I've done the whole bunch of crap from Apple, nothing works. Rebooted like 20 times each.I brought my macbook air at home, everything worked perfectly: iPhone, iPad and Apple TV can connect. So basically I guessed that the issue was coming from the iMac, something preventing it to be discovered. I've checked the bonjour broadcasting and oh, surprise, the iMac wasn't broadcasting... Weird because it's a setup from a Time Machine, the environment I am running currently on the macbook air.
Anyway, if this can help someone else:
I've ran:
ps aux | grep mDNS
and saw that for the iMac the daemon was launched with the argument -NoMulticastAdvertisements.
I've setup the daemon to run back as normal and restarted the computer:
sudo defaults write /System/Library/LaunchDaemons/com.apple.mDNSResponder ProgramArguments -array /usr/sbin/mDNSResponder -launchd
After the reboot, everything works flawlessly (it has never worked before for the 6 months I had the Apple TV).
Also interesting discovery and I think it's new because I don't remember being able to do that before, but some of my devices are on the separate 5Ghz network, some are on the 2.4Ghz and they can still all communicate flawlessly. I can use AirPlay on the Export Express that is on the 2.4 from the iMac that is on the 5Ghz, and I can access the iMac library from whatever band. Pretty nice! -
[SOLVED] network randomly doesn't work after reboot (e100)
Hi
Lately I have some weird issues with network. I shutdown computer during night, so basicly I reboot it at least once per day and every now and then without any pattern network doesn't work at all and so far only solution I have found is to reboot (again).
Before anything else I'm sure it's not hardware problem, since other OS on same computer don't have any issues, neither is router since other devices in network from laptops to mobile phones work flawless.
Relevant info and what I have found so far (not everything is copy/pasted so there may be some typos):
$less rc.conf (network part)
eth1="eth1 192.168.1.242 netmask 255.255.255.0 broadcast 192.168.1.255
INTERFACES=(eth1)
gateway="default gw 192.168.1.1"
ROUTES=(gateway)
$ifconfig
eth1 Link encap:Ethernet HWaddr 00:D0:B7:5A:7A:A9
inet addr:192.168.1.242 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:380 errors:0 dropped:0 overruns:0 frame:0
TX packets:380 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:36154 (35.3 Kb) TX bytes:36154 (35.3 Kb)
$route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.0 * 255.255.255.0 U 0 0 0 eth1
default 192.168.1.1 0.0.0.0 UG 0 0 0 eth1
$ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data
From 192.168.1.242 icmp_seq=2 Destination Host Unreachable
So basicly network is dead, can't even ping router, cable connection is detected tho (lights are on). I have tried to restart newtork with /etc/rc.d/network stop/start, nothing. Only clue is dmesg.
$dmesg
Linux version 2.6.30-ARCH (root@T-POWA-LX) (gcc version 4.4.1 (GCC) ) #1 SMP PREEMPT Fri Jul 31 07:30:28 CEST 2009
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e100 0000:03:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
e100 0000:03:07.0: PME# disabled
e100: eth1: e100_probe: addr 0xfdfff000, irq 17, MAC addr 00:d0:b7:5a:7a:a9
e100 0000:03:07.0: firmware: requesting e100/d101m_ucode.bin
ADDRCONF(NETDEV_UP): eth1: link is not ready
modrope -r e100 and then reloading it doesn't help either, but reboot does (once I had to reboot twice tho).
Anyone with more clue and ideas then me, it's getting really annoying, it also kill whole KDE plasma-desktop for couple of minutes before plasmoids find out network is really down and I'm not really fan of morning "gamble". I can't pinpoint some hard date/update when this started to happening because like I said it's random but last couple of months should be quite accurate. Thanks in advance.
EDIT: dmesg when network works:
tilen@pikmin ~]$ dmesg | grep e100
pci 0000:03:07.0: Firmware left e100 interrupts enabled; disabling
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e100 0000:03:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
e100 0000:03:07.0: PME# disabled
e100: eth0: e100_probe: addr 0xfdfff000, irq 17, MAC addr 00:d0:b7:5a:7a:a9
Last edited by NoOrdinary (2009-09-05 09:47:20)I don't have anything special set at router but I doubt rc.conf play any role. I will try to set it up with dhcp (but I think I have tried that already) if there is any change.
This morning I had to reboot twice, so new kernel didn't help. Fowler, what network card are you using, also e100 (well or some intel)? I dunno, should this be handed to the kernel team? If it will piss me enough one morning I'll just go and buy a new network card, just wanna be sure that will really solve the problem.
UPDATE: OK, this is just silly. I remebered I have acctualy onboard LAN so I edited rc.conf and dived into the dust under my desk to move cable and there I found out it was acctual onboard in use all the time Now this dosen't make much sense to me anymore, when I can't get net up all the stuff in dmesg is e100 related. Anyway, I connected network to e100 and rebooted, suprise, same story. Dmesg reported again link was not ready. I edited rc.conf to
INTERFACES=(eth0 !eth1)
in case this has anything to do with proper timing at assigning whatever needs to be assigned to network cards at boot so I'm sure just 1 card with all info provided get's kicked in at boot. First reboot after that works, it dosen't prove anything yet but at leat it's some kind of progress in recognising proper cause.
UPDATE 2: Nah, still happens. Googling for "no link during initialization" show a lot of familiar problems, almost all on nforce motherboards and mine is nforce too. I just don't get it why this mess seperate PCI network card. In any case it's extremely annoying.
Last edited by NoOrdinary (2009-09-02 11:46:27) -
Swipe doesn't work on my mobile.
Hi everyone,
My swipe on moblie doesn't work. I checked "enable swipe" and still doesn't work.
I don't know what's the right link for the phone but here's my link and just type it on your phone: EFS2 Soccer Clinic: Media
Maybe I missed something or whatever, Let me know!
Thanks
DebsThe new release of Muse didn't seem to fix the problem for me, so I don't think they are addressing it. I was only able to fix the problem by having a developer modify the code to fix the swipe function.Only thing I've seen is this comment from Adobe on July 7th.
"In the most recent major update of Chrome, Google fundamentally changed how Mobile Chrome supports swipe events. Those changes have broken swipe behaviors on Muse generated websites when viewed in Mobile Chrome. We're aware of the issue and working on changes to Muse code generation to address it as part of a future major update of Muse."
https://forums.adobe.com/message/6529993#6529993
Maybe you are looking for
-
HT5312 how can i add a rescue email to my account
how can i add a rescue email to my app store account i traid hard to find a seloutin becouse i dont know the securty questins answers and there is no rescue emai please help me
-
How Can i override a target for a monitor in a sealed Management pack
Hello everyone, I have very generic question here, May be it is too basic. I have a time Skew Monitor that is present from an AD MP which is targeted to only AD Computers. Now overriding this Monitor to ALL computers , will this monitor fun
-
How do I get the groups in my address book to my contact lists in Mail
The groups in my address book are displayed in my contacts list in Mail
-
OBIA 11g: Financial Analytics Config
We are configuring OBIA 11.1.1.7 to Financial Analytics based on the tasks provided in documnetation. FInding it bit hard to understand the current documnetation structure after working on 7.9.6.3 where there were specific section for Fiancial Analyt
-
Lock Maintenance Cycle edition
Hi, I´m trying to lock the edition of the Solution Manager Maintenance Cycle. I discover the authorization object that allows the edition of the Maintenance Cycle: Authorization Object "CRM_ORD_PR" with Business Transaction Type "SDMN" and activity "