I think my drivers for my SB Audigy SE is disconnecting my inter

I got 5. speakers and a SB Audigy SE to go with them. I installed everything fine but once I tried to connect to the internet (with dial-up), my comp restarted without warning. After tinkering around, I found it must be the drivers that make it crash. When I uninstall them, everything works, including the internet, but I have no sound. When I REinstall the drivers, I have sound, but no internet.
What can I do? Is there anything I can do with the drivers I have now to make them work with my internet AND normal sound? The drivers came on the standard disk that is included with the cards, thats what I've been installing the drivers over and over from.

Is the soundcard sharing a Interrupt with the Modem? (If the Modem is a PCI card, look after interuppts) USB/ COM ports also need a Interrupt. Better look if your system is working stable, and put the Audigy as far away as you can from the Graphics- card.

Similar Messages

Lastest drivers for the SB Audigy

?Hi all,??When I install the latest drivers for my SB Audigy SE (version .04.0077),? my sound card shows as an SB Li've! 24-bit in windows XP. Is there some kind of problem with these drivers recognizing which card is installed? I'm wondering if this will cause any problems, whether I should stick with the older drivers?Thanks in advance for any info,?DW

The Canon MG series uses two protocols - Apple's Bonjour and Canon's own "canonijnetwork". Bonjour is used by the printer and scanner component, while the Canon protocol is used by the printer only. Given that you cannot locate either via the Add printer window and I'm assuming the printer is networked, then open Safari and then its preferences and select the Advanced tab. You will see an entry of Bonjour and the option to enable it in the Favorites bar or Bookmarks menu bar. Enable one of these and then close the Safari Preferences window. Now open the Bonjour bookmark (via the Favorites bar or Bookmarks menu). Do you see the MG5220?
If not, then check what IP address it is using by printing a network data list. If you then enter the IP address into Safari (for example http://10.0.1.10) this should connect to the internal web page of the printer. Does this happen? If yes, then it at least shows that you have a working connection between your Mac and the printer. If it does not connect to the MG5220 web page, then check what IP address your Mac is using and compare that to the MG. Typically for a home network the first three sets of numbers in the IP address (known as the subnet) are the same and the last number (known as the network address) is different for each device on the local network.

Updating drivers for the Soundblaster Audigy 2

Okay here's my problem, my original driver from the CD was dated from August 2004 so I decided to use the autoupdate. It installed the new driver but then my eax, and pretty much everything else wouldn't work. I followed all the uninstall directions given on the site and then only installed the newer driver, it does work fine but it seems that when you?download the standalone drivers it'sdoesn't come?with anything except for a small basic creative?audio control panel and no graghic equalizer and trying to figure out what else I need to download is confusing as hell. After that I uninstalled the new driver, cleaned?everything out,?I?went to put the CD in to go back to the original driver and it tells me there's no soundblaster card detected even though the autoupdate detected it just fine. So now I'm back to using the updated driver. As I said before it does work fine and I really don't use EAX or any other effects for games or movies but I would still like a graphic equalizer. Does anyone know if I can download a standalone equalizer for this driver?

i installed all these? and have all the cards functions ..A 2ZS driver dated 9 oct 06DTS Neo? 6 dated 22 Dec 06? , CD Burner plug in 22 Dec 06? , Creative Media Source Player? 22 Dec 06 , Vienna Sound Font? 29 Mar 06 , Creative Media Source DVD Audio? 25 Jan 06 ,? i also have Media Source Player dated ?3 Aug 05 ? and all the Aug 05 Dated software installed as i have a remote that will not wotk with Media Player 5www://us.creative.com/support/downloadsselect Soundblaster then ?Audigy , then Audigy 2 ZS , to find the softwareMessage Edited by Toronto699 on 08-05-20070:4 AM

Need WXP MCE drivers for Qosmio F20

Hi everyone.
I recently reloaded the OS on a clients Qosmio F20 (PQF20A-00D00C). They didn't have any recovery disks and I didn't make any recovery disks (as per a KB article I found later - not that I recall any such menu item).
I am looking for the drivers for such a laptop but the Toshiba site only has drivers for LAN, WLAN and bluetooth. I can't see any for audio, vga, chipset etc.
Any idea where I can find such drivers for XP MCE(Pro)?
Cheers.

Hay
I don't have time to check all this but I think all drivers for WXP MCE should be available on Toshiba download page under http://www.mytoshiba.com.au/
You can also try to find missing drivers on European Toshiba page under http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp (Product type > Archive). I presume there is no big difference between Australian and European Qosmio F20.
Try to find drivers you can use with WXP MCE.

Audigy 2 sound card drivers for windows 7

hello,
Audigy 2 sound card drivers for windows 7.
I bought the card from a friend no longer used. funtion perfectly on Win XP, but I have a system equipped to win 7 / 32 bit. unable to install a driver to work, the soundcard is recognized, but the properties says "This device can not start. (Code 10)". All software is installed. But I think the driver is the problem, I downloaded the package from the site, they also have a software autoupdate, but everything ends with error.
SB0240 Audigy2
Some help pls.

back,
my operating sistem seems to be the problem.
i instaled a new clean win 7/64 and the driver is ok.
now, my currently operating sistem works verry fine and i don't want to format.
i have many software programs instaled in a period time and it took me some time to instaled again.
what sollution is in this moment?
my sistem (win ultimate 7/32 actualy) is daily updated.
is there any possibility to remove all audio drivers, including montherboard and audigy and reinstal all?
thank you.

Drivers For Mac OS X 10.3 (Audigy 7.1

Hi! I bought an Audigy 7. SE recently to replace a standart built-in sound card in my G4. I chose it keeping the hope that I'll find drivers for it on this website =) Unfortunately, I've made a mistake. I searched Google a lot, but it gave me noothing too. So, my question is - can I find drivers for Mac Os X anywhere?
looking forward to hearing from U,
Abadd0N (RUS)

I don't think so....at least there isn't an official Mac driver from creative. No much of a Mac user myself...so probably see if others can suggest anything to u.

I need drivers for my Audigy 2 in a Dell XPS

I have a Dell XPS. I just installed Windows XP Pro SP3 in the computer and I dont have the drivers for the Factory installed Audigy 2 ZS - Dell (OEM) SB0358 sound card. The drivers didn't load when I installed the OS. Dell does not have the drivers just a web patch avalible, and Creative does not have them ether. I tried a few Audigy drivers but all have the same error message that the sound device supported is not found. Does anyone know how I can get them or which driver will work with this card?

Daniel K.'s Audigy support pack 3.6 will recognize your DELL card and you get see the info here:
http://forums.creative.com/t5/Sound-Blaster/SB-Audigy-Series-Support-Pack-3-6--09-2009/td-p/540934
I have used Dan's packs on OEM Dell cards before. He usually puts the hardware ID in his inf file.

Drivers for audigy 2 va

I ordered my soundblaster audigy 2 value from a reputable online vendor and received the goods through the post today. However the driver cd had a hefty crack right in the middle, rendering it completely useless.
No problem I thought, I'll just download the drivers from the creative site. Three hours later I'm sitting here writing this in sheer disbelief that I cant find a single driver for love or money.
Let me just say its the first time in all my years of experience I have been unable to find the required drivers for a piece of hardware.
Do these drivers exist anywhere online, or do I have to waste god knows how long sorting it out with my retailer? I sincerely hope somebody can point me in the right direction, because frankly this is a ridiculous state of affairs that could have been sorted out in minutes if Creative had the same level of product support offered by practically every one of their competitors.
Message Edited by martynium on 02-0-2005 0:56 AM

I had made a similar post previously, and if you read these forums, it seems a lot of people are being inconvenienced by not having available stand-alone drivers. I bit the bullet and paid for an installation cd to be shipped to me, and it seems you might need to do the same. To bad writing drivers is not an easier process!
Here is the number for customer support by the way: -800-998-000Message Edited by sks on 02--2005 2:28 PMMessage Edited by sks on 02--2005 2:28 PM

Audigy SE Drivers for Vista 32 bit PLE

GAH! I NEED SOUND! Please creative, I am begging you. Do you have any plans on releasing it's As in ever? even when the full version is out will you not have drivers?

I've heard of audigy but not of a se version but you might want to download kx drivers for it http://kxproject.lugosoft.com/ i downloaded kx drivers for my sound blaster li've 5. and they worked fine with vista.

What about the vista drivers for the audigy seri

now that the xifi vista drivers are out, when can we expect the (non-beta) vista drivers for the audigy series?

Actually, you can use the X-Fi-Drivers for the A2ZS. Simply unpack the install-file (e.g. with WinRAR) and run the setup.exe in the "Drivers"-folder. The Audio-Console will be installed too, you'll find it in your "windows/system32"-folder by the name "CtPanel.exe". I use the x64-bit version of Windows Vista, so the AudioConsole for this version couldn't see the installed Audigy-driver for some reason. After I've copied the CtPanel.exe from "yourunpackedinstallfolder/Drivers/wdm/common/i386" to the System32-folder, the Console worked as it should.Because the Console has not the best variety of the options, I've also tried to install the creative-programms from my CD. I could install the "Speaker-Settings"-tool, and it works fine. But the Surround-Mixer seems not to work under Vista, mooving the sliders has no affects on the real volume. I hope, Creative will release the good-working Software-Suite for Windows Vista, I really don't want to argue with the Audio-Console.Message Edited by theLost on 03-08-2007:28 AM

Will there be new Audigy 2 Drivers for XP64? Or N

Will there be new drivers for XP64 and the Audigy 2? I FINALLY found why my Audigy 2 gives no sound in the center or rear channels. I have more than 2 GT of RAM. In my case I have 4G of ram and the I/O space used by the Audigy is mapped above the 2.8 GB boundary of XP and the drivers do not work. If I do a /maxmem=4096 in my boot.ini, everything works as it should.
So I know this has n=been reported for the XFi, and a fix will come, but will a fix come for the Audigy?
Thankws

I also have the problem with Pinnacle PCTV/Audigy 2, reported by numerous users both in SB and Pinnacle forums. (The problem in short, is that if Timeshifting is enabled in PCTV Vision, the line-in is muted when recording, resulting in silent recordings. Effecti'vely, this means the timeshifting feature does not work with Audigy 2) I have an on-going support case with Pinnacle, but they do not seem to acknowledge the problem; they just go on about updating drivers and re-installing the software. Clearly, the problem is a quirk with Audigy 2 that PCTV does not handle. So who to blame? To add to my frustration, I discovered that my Audigy 2 is a Dell OEM version, so even if Creative were to fix this, I would have to wait for a Dell specific version of the driver. Sorry for all the negativism, but I needed to vent...
On the positi've side, I did discover a work-around that actually seems to work. I can enable the integrated sound on the mother board, connect the PCTV card to the integrated line-in and the head phone jack to the Audigy 2 line-in. Then configure PCTV to record sound from the integrated sound. This is not ideal, but again, it works

Problems with latest drivers for Audigy 2

Here is my problem: I have tried several times to install the newest drivers. However my sound card doesn't install correctly. I dl'ed the drivers and the dvd-audio .exe thinking the dvd-audio is what I needed. It wasn't. The dvd-audio program gives me a error message saying no device is found. Going into the control panel --> sounds and audio settings, shows I have no device installed. Likewise in the device manager the little yellow "!" is there, and windows says multimedia audio controller, nothing more. However, if you try to install drivers, you will get a message saying drivers for the device are there, and will be uninstalled to continue installation. Um, what gives? Am I doing something wrong? The original drivers work and so do the beta AL drivers but the latest I can't get to work.... :smileyindifferent:

The card should have come with a CD. Did you contact your supplier or the store where you got the card, to see if they have the CD for you?
Cat

Need drivers for Sb0250 Audigy 2 Platinum

I am racking my brain trying to get the Vista drivers to make the Audigy 2 platinum SB0250 work. The card works fine but I cannot get a signal to or from the front panel sb0250 dri've and creatives website does not seem to have them. Any help?

Daniel K.'s Audigy support pack 3.6 will recognize your DELL card and you get see the info here:
http://forums.creative.com/t5/Sound-Blaster/SB-Audigy-Series-Support-Pack-3-6--09-2009/td-p/540934
I have used Dan's packs on OEM Dell cards before. He usually puts the hardware ID in his inf file.

Audio and video drivers for IBM Lenovo think center Pc

Hi
This is shiva and i require audio and video drivers for the following pcLenovo ThinkCenter M/T -9389-A76 S/N- ****** where to get it please mail me or leave a scrap here , regarding the link. *@*
Moderator edit: Removed serail number to prevent mis-use. Masked member's email address to prevent it from being scooped up by the spam crawlers. Please use the private Message (PM) feature instead. Click on the member's name>Send this user a private message.

Hi Shiva,
You can find drivers here:- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-66440
If you have XP then you might require following for audio as well:-
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-65440 [SP1]
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-65456 [SP2]
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Beta drivers for Audigy2

Well, the title says what I'm looking for, but here's my problem:
I had installed Quake4, and was playing fine. After I had finished the game, I went to update my drivers (finally,) and noticed that I was running my NX on generic windows drivers. I updated all the drivers, mediasource, etc... (along with some other housekeeping updates,) and I now can no longer open the game.
I've already eliminated the video card update as the problem, and I honestly don't know of a way to eliminate a bios update issue, however, I HIGHLY doubt that is the culprit. After some discussions in the quake disc. boards, I sence that there is a problem with the creative drivers. I have been told that most people are getting success by using the latest beta drivers, and I was linked to a file called "SBA2_PCDrvBeta_LB_2_08_0002.exe" However, when I try to run that file, I'm told that "Setup is unable to detect a supported device on your system..." As the title says Audigy2/ZS, Audigy 4, I'm thinking these are the wrong beta drivers for my device, but I can't find beta drivers for the Audigy2 NX USB
Help? Thanks...

I have tried re-installing, that isn't working. I'm also hearing that people are having success when installing the OpenAL libs....
I've been trying to get this file: http://developer.creative.com/articl...&top=38&aid=46 however, whenever I try to d/l the file I time-out to a "page unavail." error... Is there some server error at creative? ...or, does anyone know of a mirror server?
The file I'm looking for is: OpenALwEAX.exe
Message Edited by Toker on -02-2005 0:45 PM

I think my drivers for my SB Audigy SE is disconnecting my inter

Similar Messages

Maybe you are looking for