I think my system is stable but....

If you look at my sig you'll see my memory.  One stick is LL and the other is XLL.  I ran memtest last night just to make sure that I won't get any more BSOD.  I ran it for one pass and no errors.  Is one pass all I need?
I then ran Prime95 for 7 hours while running 3DMark2001 for 4 hours and then ran Norton while Prime ran and still no BSODs.  
Did I run MemTest86 enough?  Does this sound stable to you?

1t is faster but  usually runs better with low latency memory, it can therfore be considered more unstable, dependent on memory
2T slower default setting.
Haven't got any benchmarks to hand so can't say offhand. Run sandra memory benchmark on 1t & 2t  & compare results.

Similar Messages

  • I successfully deleted a user from my MacBook through the Users and Groups window in System Preferences.  But now I cannot close the lock in the bottom left corner of the box.  When I click on it, I briefly see a word that I think says "reauthorizing" but

    I successfully deleted a user from my MacBook through the Users and Groups window in System Preferences.  But now I cannot close the lock in the bottom left corner of the box.  When I click on it, I briefly see a word that I think says "reauthorizing" but the word flashes too quickly to tell for sure.

    If you are admin.
    Try restarting your Mac.

  • I have an iMac running system 10.7.5 and have AI CS 5 and CS 6 installed. I am thinking to upgrade to system 10.8, but I wonder if I won't be able to run AI CS 5 anymore?

    I have an iMac running system 10.7.5 and have AI CS 5 and CS 6 installed. I am thinking to upgrade to system 10.8, but I wonder if I won't be able to run AI CS 5 anymore?
    I like CS 5 a lot better than CS 6.

    CS5 runs on 10.8
    http://blogs.adobe.com/vikrant/2012/07/adobe-creative-suite-and-mountain-lion-mac-os-x-10- 8/

  • HT3053 Can I run my MacBook Pro Late 2008 without battery forever? Is it bad in long term or anything? Does it make the system less stable?

    Can I run my MacBook Pro Late 2008 without battery forever? Is it bad in long term or anything? Does it make the system less stable?
    My battery got swollen (and I unfortunately noticed it very late and might have be running with it for months, which potentially explains all the crashes everyday and the trackpad not working anymore, the Apple test also says I have a bar of ram broken...) and I had to remove it because the back pannel did not close anymore... Can I still use my MBP normally forever that way? I was planning on buying a new mac anyway but maybe waiting for the next iMac upgrade in the year... Should I wait?

    Other than the system shutting down instantly if you have a power outage, whcih could corrupt the OS. Nothing else bad will happen.

  • HT2490 I can't find System Preferences on my Mac. I can locate the Apple menu and click on the System Preferences tab, but the System Preferences refuses to launch. Help!

    I can locate the Apple menu and click on the System Preferences tab, but the System Preferences refuses to launch. Help!

    I think it must be missing from the Applications folder.
    Do you have your 10.4 Install Disc to do an Archive & Install?

  • Can't connect to the internet on a wireless system at school, but fine when I'm at home.

    Can't connect to the internet on a wireless system at school, but fine when I'm at home. All semester, there was no problem getting on the wireless system at school.  I had a problem, put in my school log-in and password and saved it in keychain.  Since, that time I have been unable to connect to the wireless system at school.  I delete this action out of "Keychain" and went to "Preferences" and deleted the "Keychain" action, but today at school I couldn't log in.  Any suggestions would be appreciated.  MacBook; OS 10.5.8

    I think your best bet is to go to technical support at your school (hopefully you have one) and they will help you out. The only reason I can come up with as to why you are not getting wireless access is that your settings are wrong (need to turn airport on) or your computer is not registered into the university.
    Good luck.

  • Think vantage system update problem

    I just installed the think vantage toolbox and the think vantage system update on my Z560, Windows 7 laptop......  but when i run the system update for lenovo updates, it gets to only  16% complete and  then tells me "there are no applicable packages found for your system".   My computer was purchased in January 2011 and I know from looking at the driver download page that there are all kinds of updates for my machine released in February 2011 which I  haven't downloaded yet.  So what should I do to get the system update working properly?????  I had thought that the system update tool was a godsend, because I am computer shy and somewhat afraid of completely messing up my machine by doing the wrong thing. So, I'd really like to get it working.
    And, if I can't do that, does it hurt to download any potentially relevant driver update (those noted as being for Z560s, that is)????   Thanks for any advice.
    Solved!
    Go to Solution.

    isn't the z560 a ideapad in that case thinkvantage software won't work
    Thinkpad R61 7733-1GU
    Thinkpad X61T 7762-54U
    Thinkpad X60T 6363-4GU
    Did a member help you today? Thank them with a Kudo!
    If a post answers your question, please mark it as an "Accepted Solution"!
    Regards,
    GMAC

  • Thinking of upgrading to Yosemite -  but want to be able to downgrade to mountain lion - How?

    Thinking of upgrading to Yosemite -  but want to be able to downgrade to mountain lion - How?
    Hi all.
    I am wondering if I upgrade to Yosemite is there a way that I will be able to downgrade / revert back to mountain lion if I find out that too many of my most essential applications  are no longer working?
    I have read there have been compatibility issues  between some of my most necessary / favourite applications I use in mountain lion and Mavericks,  which is why I never upgraded to Mavericks.
    However , I am noticing in the app store there are a lot of apps I am interested in which I no longer able to purchase / download because they require Yosemite, and mountain lion is out-dated.
    However, if I upgrade my OS, I am afraid of incompatibility with the most important apps in my workflow though.
    Thanks.

    Hi Arthur thank you very much for your response.
    Sorry for my late reply.
    My following question is summed up in the last sentence of this post.
    [is only one time machine backup possible per external backup hard drive? Or can I make separate Time Machine backups for separate purposes?]
    I went ahead and installed Yosemite.
    There are some things I like about Yosemite and I might trial it for a little bit longer,
    but after a couple of days of trials and trying out, I've decided that I think I generally prefer mountain lion better,
    and I will reinstall it , and get a disk image of Yosemite and run that as a Virtual Machine when I need it.
    [^ This is what I should have done in the first place.]
    Before I installed Yosemite I [stupidly] used Time machine to back up only my application folders / application support / general system files,
    [I used system preferences to exclude everything else in the TM backup] so that I would not have to reinstall my applications / essential system structures.
    I did not back up the rest of my files and folders / whole machine though.
    I should have done this.
    I just didn't want to wait for about 800 gb of data to transfer [impatient].
    [in retrospect I should have run Yosemite through a virtual machine within Mountain Lion to see if I liked it before installing it completely].
    With Yosemite installed would I be able to make a SEPARATE time machine backup of all my files / documents / media folders in Time Machine on Yosemite, and use this to re-install these on Mountain lion if I downgrade ?
    Or is only one time machine backup possible per external backup hard drive ?
    Thanks.

  • Got my system 100% stable.

    Well, after going though 3 motherboards,2 cpus,2 types of memory, 2 power supplies, I now got my system 100% stable.
    What through me off, if the system would run more stable at command rate 2 , and with 1 dimm installed and higher ddr voltage, So , I thought it was a memory problem, so I got a better power supply, the power supply helped, but didnt cure my problem, so I tried corsair memory and it didnt fix it ether.
    I tired every setting and driver possible and nothing helped.
    All this time, it turned out to be my Built by Ati radeon 9800.
    The card it self is fine and works in other systems.
    I just got a BFG 6800NU and it works great"not a single crash after hours of testing".
    I am now running my memory at command rate 1T with only 2.6 volts stable.
    My last motherboard"the gigabyte k8ns pro, which also used the nforce3 250 chip" had the same problem.
    Seems, ati cards and Nforce3 250 chips dont mix well.
    Anyway, to make a long story short here is my working system.
    Athlon64 3200 newcastle"shows the right temps since bios 1.43"
    Thermalright 948u, with 92mm delta fan.
    K8n platinum.
    2x512 double sided dimms"corsair xms twinx1024-3200c2pt rev 1.3, 2.6 volts
    Command rate 1T 2.5,3,3,6.
    BFG 6800" newest drivers and directx 9c
    SBlive
    Hitachie 160GB SATA drive
    Enermax 465 12 volt rail 33a
    Modded X-dreamer case.

    Thankyou Kaspars_B  
    I always thought it was 22 amps but after looking inside the case your right, it is 28 amps  
    Have fixed sig now.

  • I have an iphone 4 with the latest updates, but icloud does not show store option. My pics and music are not on the cloud, how do I upload them from my phone to the cloud? I just paid $20 thinking i needed more storage, but that did nothing. help

    I have an Iphone 4 with OS 5.1.1 and it does not show store or music under my icloud tab in the phone. Also, my music and photos don't show on my icloud?
    My contacts show and find my iphone....on the icloud. I just paid $20 thinking more storage would help, but it didn't. How can i cancel that and get a refund?
    Where are is my music on the cloud? How do I upload my music to it? If I lose my phone, it looks like there is no where to go to retrieve my music.
    And itunes won't let me sync my music to my computer. It is all music that I've purchased on itunes.
    Thanks!

    You need to subscribe to iTunes Match to store your music on iCloud:
    http://www.apple.com/itunes/itunes-match/
    To transfer iTunes Store purchases made on your phone to your computer, connect your phone then choose "Transfer purchases..." from the File menu in iTunes.
    Photostream transfers photos taken on your iOS devices to other devices and your computer. For troubleshooting Photostream see: http://support.apple.com/kb/TS3989

  • HT3529 My phone bill is paid and I can't send or receive msgs and I tried to call Rogers but that doesn't even work and if it was a bill issue I could still call Rogers think it might be software but I would like to know what to do

    My phone bill is paid and I can't send or receive msgs and I tried to call Rogers but that doesn't even work and if it was a bill issue I could still call Rogers think it might be software but I would like to know what to do

    I'm sorry to learn that you are not able to make/receive calls chelseabee! (ticket number removed) results indicate that there is no issues with the network or account provisioning. Since you have already done a hard reset http://vz.to/1gBkSJc (as per your post), I recommend exploring replacement options. If your phone is within the one year manufacturers' warranty we can provide a Certified Like New replacement http://vz.to/uyYF0o as long as no physical/liquid damage exist. If your phone has sustained physical/water damage and you have insurance, you can submit a claim to the insurance company online at this link http://bit.ly/07CrqPK
    AntonioC_VZW Follow us on Twitter at www.twitter.com/VZWSupport
    >> Edited to comply with the Verizon Wireless Terms of Service <<
    Edited by:  Verizon Moderator

  • HT1926 Trying to re-install iTunes and the message "Apple mobile device failed to start. Verify that you have sufficient privileges to start system services." But I don't know what to do? Please can someone help, I'm not the most technologically advanced

    Trying to re-install iTunes and the message "Apple mobile device failed to start. Verify that you have sufficient privileges to start system services." But I don't know what to do? Please can someone help, I'm not the most technologically advanced person.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • IDOC Message coming from R/3 system to XI , but waits in Qeue

    <b>IDOC Message coming from R/3 system to XI , but waits in Qeue</b>
    XI doesn't send the message FTP receiver.In XI sxmb_moni  the "c" column contains green flags that mean "message scheduled on outbound side".
    In smq1 It writes "SYSFAIL" means "Password logon no longer possible - too many faile"
    But I use "anonymus" in FTP adapter. Which password is this, which component is related with this error.
    How can I do?
    thanks

    Hi Cemil,
    it may be that the FTP server where you want to send your output file does not accept anonymous connections.........so just get the username and password of that FTP server, which has access to do FTP to that machine, for doing ftp to that machine, then your output msg will be FTP to your target FTP server........
    Thanks,
    Rajeev Gupta

  • I have a Macbook 2008 and want to update my software to OSX Lion.  Do you think my system can handle it?

    I have a Macbook 2008 and want to update my software to OSX Lion.  Do you think my system can handle it?

    Yes, if it has at least 4GB RAM.
    (63319)

  • Hi i have a macbook its osx 10.4.11 core duel and i think its tiger already installed but it needs updating what do i do  thanks

    hi i have a macbook its osx 10.4.11 core duel and i think its tiger already installed but it needs updating what do i do  thanks

    Hi Paul
    The current version of OS X is Snow Leopard (OS X 10.6) and you should be able to order an installation disk for your MacBook from the on line Apple Store. 
    Soon, a newer version of OS X (called Lion) is being released, but I don't think that it will run on a Core Duo because that particular processor is 32 bit only.
    Bob

Maybe you are looking for

  • Home sharing no longer working on one Mac

    My wife and I used home sharing via my iTunes account without any problems about a year ago. Since then, we have both moved our iTunes libraries over to new Macs. Now, I can start home sharing on my Mac, but when I attempt to start home sharing on he

  • Role Tab(section) is not getting captured through CATT script on PI/XI.

    Role Tab(section) is not getting captured through CATT script on PI/XI system I am trying to create CATT script for user creation and role assignment on PI/XI. Every screen except ROLE and GROUPS is getting captured.

  • Error in DMSYS.DBMS_JDM_INTERNAL when applying SVM regression model

    Hi, I created SVM regression model with case-id column of varchar2(40) and several numeric inputs. When I try to apply the model (even on the same table that was used for training) I am getting Server task state: error Server task detail: ORA-06502:

  • Missing Authorization in BI 7

    I have just created a new role in BI 7 as Basic Reporting Role via PFCG. Following are the steps I used: 1) Create New Role in PFCG 2) In PFCG ->Authorization tab, click on Change Authorization Data icon. Then select Do Not Select Template. 3) Click

  • I have 2 accounts, how can I

    Hi can I merge them so I have 1 account