I Think of New Feature

Sorry to Bother, but Im Thinking Something about innovation in iPod Touch
1. GSM Feature
Im Thinking iPod can use micro SIM card, so it can Browse through internet via GSM module.
It Cant use for telephony or sms service, i think its was pretty useless, but i think if the device size was still same or smaller thank iTouch 4th Gen, it can hit the market better.
Why?
Maybe its look like a mini iPad, but i think its good because we can surf internet anytime at anywhere without additional device
Im Located in Indonesia, where internet doest growh fast as united stated, so its hard to find a wifi service.
Moreover, we can use geotagging in the iPod touch with micro sim card.
2. Scrollover Page by Touching the Dots on HomeScreen
The idea was ; Touch and Hold the dots, so it can scrool the homepage faster, page by page
3. Scroll Playing Movie by Touch (or better) Like Music Library
Mind Combining This with This?
So it can be this :
Sorry, in not good at editing photo, but the concept was a brand new video library like this.
The three of this what i tough it can be developing on the next next iPod or iPhone (gen6) or iOS 5.1/5.2 / later
What do you though?

Yes, this is really a deal breaker for me as you say ... I'm forced to write three times slower than I did on Windows 8, that's horrible (I used to type about 110 words/min).
I'm going to return my Mac and I think I'm going to buy an Asus laptop instead ...
What a shame that Apple does not do anything for this to be configured, I have read other forums and I see that I'm not the only one complaining about that ...
How to lose customers so stupidly ...
But thank you for your reply.

Similar Messages

Just upgraded to LR2. I love the new features but LR constantly crashes

Help please. I just upgraded from 1.4 to 2.4. I think the new features are superb but all too frequently while I am in the Develop Module, LR freezes and the only thing I can do is torce it to close from Task Manager. What should I check? I never had a single system crash with LR 1.x.
Keith

Best I can come with is to point you the trouble shooting guide http://kb2.adobe.com/cps/404/kb404099.html
BTW: if using nVidia card you may find that switching performance modes helps. Unfortunately, I can't recall how or to what, but one the least obvious modes.

Follow-up to archived thread "Another Error (I think) In the 12.1 New Features Guide"

I hoped to be able to add a reply to the most recent reply on March 8 in the "Another Error (I think) In the 12.1 New Features Guide" thread (https://community.oracle.com/thread/3526588), but since that thread has been archived, I am doing what was suggested elsewhere: create a new thread referencing the old one. My reply is:
Thank you for your explanation about preferring PDF over HTML. That is perfectly fine and understandable. Also, we very much appreciate your documentation feedback in this forum, and encourage you to continue to report any issues here.
I apologize for not replying much sooner. I either didn't get or overlooked an original notification about "Recent activity" after your reply; otherwise, I would have replied then.

Thanks for that comment. I have sent a pointer to it to the writer for that book. Note that with the New Features Guide, most of the content is automatically drawn from an internal system that tracks projects and features; so if a change is needed, the writer will notify the owner of that content (typically a developer or a product manager) to investigate and (if necessary) modify the underlying data, after which the changed information will be picked up for a future revision of the book.
Also, while anyone is welcome to enter documentation comments in this forum, another option that may be more convenient for comments on specific sections is the Reader Comment area at the bottom of each HTML page (such as http://docs.oracle.com/cd/E16655_01/server.121/e17906/chapter1.htm#NEWFT495 for the page containing Section 1.5.9.8). Any comments entered in a Reader Comment area go to someone in our documentation production group, who forwards them to the appropriate writers.
However, if a comment involves multiple HTML pages or books, or if you want the matter to be in a public forum for visibility and searchability, posting in this forum is a good option.

Another Error (I think) In the 12.1 New Features Guide

Under section 1.5.9.8 Storage Snapshot Optimization:
The first bullet point is: "Database crash is consistent at the point of the snapshot."
I think that is supposed to be: "Database is crash-consistent at the point of the snapshot."
At the very least, that seems to make more sense to me. Googling around, there was a document on these features by EMC with that wording.

Thanks for that comment. I have sent a pointer to it to the writer for that book. Note that with the New Features Guide, most of the content is automatically drawn from an internal system that tracks projects and features; so if a change is needed, the writer will notify the owner of that content (typically a developer or a product manager) to investigate and (if necessary) modify the underlying data, after which the changed information will be picked up for a future revision of the book.
Also, while anyone is welcome to enter documentation comments in this forum, another option that may be more convenient for comments on specific sections is the Reader Comment area at the bottom of each HTML page (such as http://docs.oracle.com/cd/E16655_01/server.121/e17906/chapter1.htm#NEWFT495 for the page containing Section 1.5.9.8). Any comments entered in a Reader Comment area go to someone in our documentation production group, who forwards them to the appropriate writers.
However, if a comment involves multiple HTML pages or books, or if you want the matter to be in a public forum for visibility and searchability, posting in this forum is a good option.

How can I print comments in Numbers? I think was announced in the new features...

How can I print comments in Numbers in the desktopt version? I think was announced in the new features but I can't see it.

Add comments using the button in the toolbar:

Hi I am currently subscribed to PS CC but I don't think I have the latest version. I beleive this because I don't get the new welcome screen and don't new feature like the structure and color setting in the content aware patch tool. I have checked for u

Hi I am currently have a subscription to PS CC but I don't think I have the latest version. I believe this because I don't get the new welcome screen and don't have new features like the structure and color setting in the content aware patch tool. I have checked for updates and it tells me I have the current version. I check in PS I have version 14.2.1. I also have CS6 installed on my PC, could this be somehow be doing something or am I doing something wrong. Would anyone have any suggestions.

It's under "Find New Apps". You have to scroll down to see it.

Oracle 10G New Feature........Part 1

Dear all,
from last couple of days i was very busy with my oracle 10g box,so i think this is right time to
share some intresting feature on 10g and some internal stuff with all of you.
Have a look :-
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Oracle 10g Memory and Storage Feature.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1.Automatic Memory Management.
2.Online Segment Shrink
3.Redolog Advisor, checkpointing
4.Multiple Temporary tablespace.
5.Automatic Workload Repository
6.Active Session History
7.Misc
a)Rename Tablespace
b)Bigfile tablespace
c)flushing buffer cache
8.ORACLE INTERNAL
a)undocumented parameter (_log_blocks_during_backup)
b)X$ view (x$messages view)
c)Internal Structure of Controlfile
1.Automatic memory management
================================
This feature reduce the overhead of oracle DBA.previously mostly time we need to set diff oracle SGA parameter for
better performance with the help of own experience,advice views and by monitoring the behaviour
of oracle database.
this was just time consuming activity.........
Now this feature makes easy life for oracle DBA.
Just set SGA_TARGET parameter and it automatically allocate memory to different SGA parameter.
it focus on DB_CACHE_SIZE
SHARED_POOL_SIZE
LARGE_POOL
JAVA_POOL
and automatically set it as
__db_cache_size
__shared_pool_size
__large_pool_size
__java_pool_size
check it in alert_log
MMAN(memory manager) process is new in 10g and this is responsible for sga tuning task.
it automatically increase and decrease the SGA parameters value as per the requirement.
Benefit:- Maximum utlization of available SGA memory.
2.Online Segment Shrink.
==========================
hmmmmm again a new feature by oracle to reduce the downtime.Now oracle mainly focus on availablity
thats why its always try to reduce the downtime by intrducing new feature.
in previous version ,reducing High water mark of table was possible by
Exp/imp
or
alter table move....cmd. but on these method tables was not available for normal use for long hrs if it has more data.
but in 10g with just few command we can reduce the HWmark of table.
this feature is available for ASSM tablespaces.
1.alter table emp enable row movement.
2.alter table emp shrink space.
the second cmd have two phases
first phase is to compact the segment and in this phase DML operations are allowed.
second phase(shrink phase)oracle shrink the HWM of table, DML operation will be blocked at that time for short duration.
So if want to shrink the HWM of table then we should use it with two diff command
first compact the segment and then shrink it on non-peak hrs.
alter table emp shrink space compact. (This cmd doesn't block the DML operation.)
and alter table emp shrink space. (This cmd should be on non-peak hrs.)
Benefit:- better full table scan.
3.Redolog Advisor and checkpointing
================================================================
now oracle will suggest the size of redo log file by V$INSTANCE_RECOVERY
SELECT OPTIMAL_LOGFILE_SIZE
FROM V$INSTANCE_RECOVERY
this value is influence with the value of FAST_START_MTTR_TARGET .
Checkpointing
Automatic checkpointing will be enable after setting FAST_START_MTTR_TARGET to non-zero value.
4.Multiple Temporary tablespace.
==================================
Now we can manage multiple temp tablespace under one group.
we can create a tablespace group implicitly when we include the TABLESPACE GROUP clause in the CREATE TEMPORARY TABLESPACE or ALTER TABLESPACE statement and the specified tablespace group does not currently exist.
For example, if group1 is not exists,then the following statements create this groups with new tablespace
CREATE TEMPORARY TABLESPACE temp1 TEMPFILE '/u02/oracle/data/temp01.dbf'
SIZE 50M
TABLESPACE GROUP group1;
--Add Existing temp tablespace into group by
alter tablespace temp2 tablespace group group1.
--we can also assign the temp tablespace group on database level as default temp tablespace.
ALTER DATABASE <db name> DEFAULT TEMPORARY TABLESPACE group1;
benefit:- Better I/O
One sql can use more then one temp tablespace
5.AWR(Automatic Workload Repository):-
================================== AWR is built in Repository and Central point of Oracle 10g.Oracle self managing activities
is fully dependent on AWR.by default after 1 hr, oracle capure all database uses information and store in AWR with the help of
MMON process.we called it Memory monitor process.and all these information are kept upto 7 days(default) and after that it automatically purge.
we can generate a AWR report by
SQL> @?/rdbms/admin/awrrpt
Just like statspack report but its a advance and diff version of statspack,it provide more information of Database as well as OS.
it show report in Html and Text format.
we can also take manually snapshot for AWR by
BEGIN
DBMS_WORKLOAD_REPOSITORY.CREATE_SNAPSHOT ();
END;
**The STATISTICS_LEVEL initialization parameter must be set to the TYPICAL or ALL to enable the Automatic Workload Repository.
[oracle@RMSORA1 oracle]$ sqlplus / as sysdba
SQL*Plus: Release 10.1.0.2.0 - Production on Fri Mar 17 10:37:22 2006
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> @?/rdbms/admin/awrrpt
Current Instance
~~~~~~~~~~~~~~~~
DB Id DB Name Inst Num Instance
4174002554 RMSORA 1 rmsora
Specify the Report Type
~~~~~~~~~~~~~~~~~~~~~~~
Would you like an HTML report, or a plain text report?
Enter 'html' for an HTML report, or 'text' for plain text
Defaults to 'html'
Enter value for report_type: text
Type Specified: text
Instances in this Workload Repository schema
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DB Id Inst Num DB Name Instance Host
* 4174002554 1 RMSORA rmsora RMSORA1
Using 4174002554 for database Id
Using 1 for instance number
Specify the number of days of snapshots to choose from
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Entering the number of days (n) will result in the most recent
(n) days of snapshots being listed. Pressing <return> without
specifying a number lists all completed snapshots.
Listing the last 3 days of Completed Snapshots
Snap
Instance DB Name Snap Id Snap Started Level
rmsora RMSORA 16186 16 Mar 2006 17:33 1
16187 16 Mar 2006 18:00 1
16206 17 Mar 2006 03:30 1
16207 17 Mar 2006 04:00 1
16208 17 Mar 2006 04:30 1
16209 17 Mar 2006 05:00 1
16210 17 Mar 2006 05:31 1
16211 17 Mar 2006 06:00 1
16212 17 Mar 2006 06:30 1
16213 17 Mar 2006 07:00 1
16214 17 Mar 2006 07:30 1
16215 17 Mar 2006 08:01 1
16216 17 Mar 2006 08:30 1
16217 17 Mar 2006 09:00 1
Specify the Begin and End Snapshot Ids
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Enter value for begin_snap: 16216
Begin Snapshot Id specified: 16216
Enter value for end_snap: 16217
End Snapshot Id specified: 16217
Specify the Report Name
~~~~~~~~~~~~~~~~~~~~~~~
The default report file name is awrrpt_1_16216_16217.txt. To use this name,
press <return> to continue, otherwise enter an alternative.
Benefit:- Now DBA have more free time to play games.....................:-)
Advance version of statspack
more DB and OS information with self managing capabilty
New Automatic alert and database advisor with the help of AWR.
6.Active Session History:-
==========================
V$active_session_history is view that contain the recent session history.
the memory for ASH is comes from SGA and it can't more then 5% of Shared pool.
So we can get latest and active session report from v$active_session_history view and also get histortical data of
of session from DBA_HIST_ACTIVE_SESS_HISTORY.
v$active_session_history include some imp column like:-
~SQL identifier of SQL statement
~Object number, file number, and block number
~Wait event identifier and parameters
~Session identifier and session serial number
~Module and action name
~Client identifier of the session
7.Misc:-
========
Rename Tablespace:-
=================
in 10g,we can even rename a tablespace by
alter tablespace <tb_name> rename to <tb_name_new>;
This command will update the controlfile,data dictionary and datafile header,but dbf filename will be same.
**we can't rename system and sysaux tablespace.
Bigfile tablespace:-
====================
Bigfile tablespace contain only one datafile.
A bigfile tablespace with 8K blocks can contain a 32 terabyte datafile.
Bigfile tablespaces are supported only for locally managed tablespaces with automatic segment-space management.
we can take the advantage of bigfile tablespace when we are using ASM or other logical volume with RAID.
without ASM or RAID ,it gives poor response.
syntax:-
CREATE BIGFILE TABLESPACE bigtbs
Flushing Buffer Cache:-
======================
This option is same as flushing the shared pool,but only available with 10g.
but i don't know, whats the use of this command in prod database......
anyway we can check and try it on test server for tuning n testing some query etc....
SQL> alter system flush buffer_cache;
System altered.
++++++++++++++++++
8.Oracle Internal
++++++++++++++++++
Here is some stuff that is not related with 10g but have some intresting things.
a)undocumented parameter "_log_blocks_during_backup"
++++++++++++++++++++++++
as we know that oracle has generate more redo logs during hotbackup mode because
oracle has to maintain the a complete copy of block into redolog due to split block.
we can also change this behaviour by setting this parameter to False.
If Oracle block size equals the operating system block size.thus reducing the amount of redo generated
during a hot backup.
WITHOUT ORACLE SUPPORT DON'T SET IT ON PROD DATABASE.THIS DOCUMENT IS JUST FOR INFORMATIONAL PURPOSE.
b)some X$ views (X$messages)
++++++++++++++++
if you are intresting in oracle internal architecture then x$ view is right place for getting some intresting things.
X$messages :-it show all the actions that a background process do.
select * from x$messages;
like:-
lock memory at startup MMAN
Memory Management MMAN
Handle sga_target resize MMAN
Reset advisory pool when advisory turned ON MMAN
Complete deferred initialization of components MMAN
lock memory timeout action MMAN
tune undo retention MMNL
MMNL Periodic MQL Selector MMNL
ASH Sampler (KEWA) MMNL
MMON SWRF Raw Metrics Capture MMNL
reload failed KSPD callbacks MMON
SGA memory tuning MMON
background recovery area alert action MMON
Flashback Marker MMON
tablespace alert monitor MMON
Open/close flashback thread RVWR
RVWR IO's RVWR
kfcl instance recovery SMON
c)Internal Structure of Controlfile
++++++++++++++++++++++++++++++++++++
The contents of the current controlfile can be dumped in text form.
Dump Level Dump Contains
1 only the file header
2 just the file header, the database info record, and checkpoint progress records
3 all record types, but just the earliest and latest records for circular reuse record types
4 as above, but includes the 4 most recent records for circular reuse record types
5+ as above, but the number of circular reuse records included doubles with each level
the session must be connected AS SYSDBA
alter session set events 'immediate trace name controlf level 5';
This dump show lots of intresting information.
it also show rman recordes if we used this controlfile in rman backup.
Thanks
Kuljeet Pal Singh

You can find each doc in html and pdf format on the Documentation Library<br>
You can too download all the documentation in html format to have all on your own computer here (445.8MB)<br>
<br>
Nicolas.

New Features and Improvements for CS6

IMPORTANT:
By default, Photoshop comes with the Proofing Colors (Cmd/Ctrl+Y) activated and set to CMYK. Adobe must warn about that, because I was editing a large amount of pictures for work and I was doing it under that color profile/work space.
LAYERS PANEL:
Layer Adjustments:
Solid Color: visual feedback in real time.
Gradient: IDEM as above.
Pattern: IDEM as above.
Gradient Map: IDEM as above.
Gradient Editor: IDEM as above.
Opacity and Fill: IDEM as above.
Curves and Levels: Ability to load alfa channels. This way, the adjustments made on the alfa channel won't be destructive.
CHANNELS PANEL:
Channel Luminosity Selection:
Ability to add and subtract from the selection.
Ability to designate an area to be selected.
For point 1, by using the shortcut Cmd+Alt+[number] the luminosity of a channel is loaded as selection. With Cmd+Alt+Shift+[number], the selection grows. But there is no way to subtract from selection (unless by clicking with the mouse on the channel's thumbnail). I think that can be solved by using Cmd+Alt+Shift+[- or +] in order to subtract or add from selection.
Point 2 maybe even more important than point 1, because it allows selecting a designated area by the user, instead of the default luminosity selection, which ranges from 50% of the mid tones to the highlights (or shadows, if the selection is inverted). The user should be allowed to select the starting and finishing points of the luminosity selection.
I thought 2 ways for solving these issues (and making it more intuitive and faster):
A) By using the Histogram Panel, by dragging and highlighting an area on it, that it should load the selected luminosity pixels as a selection, as shown in figure 1:
figure 1
So the result of doing that will be a selection based on the area of the histogram that have been highlighted.
B) By creating a new Adjustment Layer:
It can be based in the same structure of the HUE Adjustment Layer, like figure 2 shows:
Figure 2
Or it can be this way (much better). Figure 3:
Figure 3
The selection can also be controlled by using the Click and Drag as suggested in the figure 1, as shown in the figure 4:
Figure 4
The overlaid highlighting over the histogram can be functional or just a mere graphic representation of the Range and Fade Selector. The "Fading" areas should be also be draggable in order to increase smooth the selection. However, the smoothing can be much better done with the Refining Selection tool and it can be ignored from this new tool.
In any of these cases, the adjustments should give real time feedback when growing or shrinking selection; we must see the selection going bigger or smaller and also, the highlighted area should be draggable as well.
TOOLS PANEL:
Brush: detect edges while painting on masks (for manual mask refining. It would work similar to the Replace Color Brush, but only for masks and alfa channels). It also needs a shortcut to set the opacity.
Dodge & Burn: Protect Tones should be allowed when painting on masks or alfa channels (for manual mask refining). D&B can also use edge detection as well.
FILTERS:
Some of them, like the ones involving Blur or the High-Pass and the Unsharp Mask filter, should work in real time (these ones, at the least).
It can also added a Particle Generator Filter.
It would be really nice having the ability to create particles such as dust, fog, rain, snow, etc in a more realistic manner than just the scattering function from the Brush Palette, or by mixing different filters with different blends. The Particle Generator should have an slider to control the depth of field, so it will give a feeling of depth and also, a way to load masks, so that way, the particles can exists before the image and also, behind. It would be great for creating a nice feeling of depth (kind of a bokeh effect).
I've been playing with After Effect few times, and the way to create shapes and forms from nothing is the way of easier than in Photoshop.
TIME LINE:
I think it's time give dynamism the filters applied to a movie clip, and also, dynamics to the fade effects, like it happens in After Effects by adding Bezier Curves.
HISTOGRAM:
It should be possible to zoom in into the histogram, for a more precise feedback and analysis of the image tonal values.
ADDITIONAL FEATURES:
The fade tool should work in real time.
Loupe/Magnificator View:
This is very useful when it comes to edit and image in detail, with a lot of zoom, like 3200%. Unfortunately, Photoshop doesn't provide a real time feedback in an additional window, such as the Window/Arrange/New Window For […].
It would be really useful having a window showing the image at fit on the screen while working on the other window at 100% or 3200% of zoom, but in real time. This way, you can see if you're doing a good job on the pixels or, if you're overdoing it.
It happens that, when working with big images at 100% of the image size (or more), the brain cannot figure out how is looking the whole image, so having a realtime feedback in the other window would help a lot for detailled work.
And why not, ading the same real time structure descrived above but to the Navigator, for faster and lighter use of the hardware capabilities. Probably, adding a check box to the navigator that blocks it to a given zoom, so when zooming into the image in the navigator, the image shown in the window isn't magnified too.
Give me a chance to show you some examples of what I have done by improvising particles and fog about 5 years ago:
http://mart1980.deviantart.com/gallery/5027033#/d1m119x
And what I did 7 years ago by manually, selecting different shades of gray and using just Levels for 8 hours (which coule be done faster and easier with another tool I thought, which I will post later):
I cannot post examples of the other features I'm suggesting because there are not such new features yet (I would have to create an hipothetical enviroment, but I think, you can fiure it out in your mind).
Unfortunately, I don't know programing, even though, I tried something with Filter Factory, achieving good results, but that pluging consumes too much resources and/or is bad designed/have not the right tools for certain things.
Hope this post is enough worthy of the Adobe's attention.
Thanks,
Ø³

This is a poorly explained reason about why is so important having a loupe in Photoshop. I've not also, used the best example, but I will. This belongs to the ADDITIONAL FEATURES: Loupe/Magnificator View:. Also, I will try to make my english clrearer, but here it goes:

A Success Story & First Impressions of New Features

Like many of you I was plagued with some of the serious problems with updating my Domain file: disappearing photos, missing blog comments, missing link bars at the top of the page etc. I tried the various tip and tricks sugested here with no luck. When the 2.01 update to iWeb appeared last Friday I downloaded it but I held off using it. I had already lost about 6 hours out of my life playing around with iWeb 2.0 with nothing to show for it. After reading many posts saying it didn't help I was going to hold off.
Don't ask me why, but I changed my mind. Monday I started working on my site. Creating 10 album pages to replace my homegrown versions, adding some navigation aids, relinking etc. I also moved the photo I wanted to show as the album preview to the first position on each photo page. All in all I spent about 8 hours working on the site. I would save every 10 minutes or so and duplicate the domain file and keep several generations of these around. There were no missing photos, crashes or hiccups of any kind.
This morning I uploaded the site. The first thing I noticed is this version of iWeb seems to be faster creating the files to be uploaded. Much faster. I'm not sure if this is an improvement to the code or a result of the smaller domain files created in iWeb 2. Instead of 15 minutes or so it took 5. The first upload of the files to .mac took just as long as ever, nearly 45 minutes on a high speed cable modem connection. As the upload was completing the first hiccup occured-the upload failed with a message saying there was an error creating a file. I was not optomistic at this point. I figured I was having the upload problem others have reported. All my page icons were back to red and I figured it was back to square 1. At least all the content was still in the Domain file.
When I hit the upload button the second time it took the same 5 minutes to create the files, but the upload to 30 seconds. It evidently just repaced the file that had the problem. I have since made edits to my site several times and iWeb seems to be much faster uploading the pages. I get the impression it doesn't reupload the whole page content but merely uploads the changed portion. I added a text box to 30 pages and the changes uploaded to .mac in about a minute. I am very pleased with this increase in speed.
As for the site itself I love the new features. I love the picture gallery where clicking on a picture opens up a larger copy and gives you thumbs of the other pages. I tried my site in 3 different Mac browsers with no issues and also the latest IE for Windows running under Parallels 3. Unlike what others have reported, my slideshows appear normal size on the PC. I like the new album pages and the automatic linking they provide. In iWeb itself I like being able to collapse the album folder to reduce the clutter in the navigation sidebar. I like the fact you can create a blank page now. You don't have to strip another page type to get a blank page. The skimming effect on album pages works equally well on the Mac or PC side. One interesting thing I have noticed is the picture captions are in a different font on the PC side. I use the Freestyle template for my site and the picture captions are in a handwritten style font (Handwritten-Dakota). In the past these would be converted to .png image files so they would display correctly on the PC. In this version the fonts are rendered in a serif font that looks like times. I imagine this may make the page load faster but I'm not surre if I like this feature or not. The page does look drastically different.
Speaking of dislikes there are a couple. I wish iWeb would ask you before it goes and downsamples your photos while converting to the 2.0 format. I don't like the idea that if you want to use the high quality hi res versions you have to reinsert and recaption them. Like many others I would like to be able to turn off the download button when viewing the photo galleries.
While I think Apple deserve a spanking for the initial release of iWeb 2.0, now that the patch seems to be working for me I feel it is a worthy upgrade. I am 90 percent happy with the new features and I think the other 10 percent can be tweaked by Apple in response to user feedback. If you'd care to stop by and visit my site here is the address:
http://web.mac.com/jmahoney
I hope those of you still having trouble will get your sites up and runing soon. If you held off on the 2.01 upgrade, you might want to give it a shot (after backing up your Domain file). I was pleasantly surprised.
Jim Mahoney

Thanks for your account and experience with the new iWeb.
Nice site now, although vegetarians better skip it
I personally got rather hungry viewing it. And it is only 13.30 here.

What is the best way to communicate my displeasure with new features?

tl;dr How can I complain to FireFox about the new search bar in new tabs? (Or other new features)
I've seen a question or two here about this new feature already, and it's quite obvious that the developers at FireFox are not exactly interested in what their users think of this particular feature.
The feature I'm referring to is the new search bar in the New Tab.
I've attempted a fix mentioned in a previous post (create a sub-directory 'Chrome' and create a CSS file containing specific style commands) and it did not work. I've tried a couple of other fixes mentioned on third party websites as well, to no avail.
Knowing that FireFox would add something like this without allowing an option to disable it is quite disheartening. I've been enjoying my daily use of FireFox over other browsers I had used in the past because they were cluttered and unclean, and at the time FireFox was not. This search bar has ruined that. My pinned tabs have been squashed to roughly half their original size, and the search bar is unsightly, at best.
Correct me if I'm wrong, but don't we already have a search bar at the top of the screen? I fail to see any purpose in this, except to annoy users. If there is a further purpose, please inform me (though to be completely honest, it will not change my opinion here, though it may soften the damage done)
As of yet, there have been very few features in FireFox that I have been displeased with, and each of them was shortly followed by an add-on to disable them (Or they had come with an option for disabling upon release)
I'm not here asking for help as to how to remove the search bar, I'm here asking for a link that I can use to directly inform the developers of FireFox of my opinions regarding this update.
On a third party site I read an article that claimed one of the developers made mention of an option for users to disable this search bar... According to the article, he never received a reply.
That gets me thinking, if FireFox won't listen to it's own team, should we expect them to listen to us?
I'm quite close to simply leaving FireFox because of this feature, as now it's little better than what I've left behind in the past. PaleMoon was nice, though a bit slower.
I'm not saying that I'm going to stop using FireFox, only that I'm quite put off because of what I've read, and the lack of an option to disable this feature.
If such an option exists already, please give me instruction as to how to do so, and then kindly disregard this query.
Thank you for taking the time to read this and have a nice day,
Dillon P.

Sorry I am only another Firefox user and do not really see anyway of helping you with this quest.
You may use feedback and make short comments.
* https://input.mozilla.org/feedback
*And see comments made from the interactive page https://input.mozilla.org
Statistical data from the comments are made available to developers and others.
AFAIK no one from Mozilla is likely to wish to engage in conversations about newly introduced features or deliberate feature regressions. Developers did post on the forum for a day or two after the introduction of Firefox 29 (Australis) but did not hang around and the subject of Firefox development is again considered to be off topic and outside the scope of this forum.
The forum manager who will confirm this is off topic is Madalina. (Listing & contact details https://support.mozilla.org/en-US/kb/meet-team )
This is a link [/questions/998084#answer-566525] relating to one developers comments from back when it was on topic.
The mailinglists and blogs can be seen here
* https://www.mozilla.org/about/forums/#general-development
* Nearly always closed for comments but https://blog.mozilla.org
** https://blog.mozilla.org/ux/
if you do discover anywhere where staff welcome discussion and engage with end users please let us know.
I will tag this post as '''escalate''' so that at least it is seen by HelpDesk staff maybe they are aware of some method end users may use to engage in dialogue, besides posting one way input comments.
IIRC there was talk of listing any such resources if they were discovered, so that we could post more helpful replies than this one.
We do not specifically deal with hacks to Firefox on this forum but will try to help with advice, mainly saying use addons. Please continue to post if you have direct questions you think we may be able to assist with.

Does anyone else think the new iPhoto is not very good? you can no longer burn photo cd's directly from it!

I do not like the new iphoto, it will not let you burn a photo cd directly from iphoto like it used to. It use to be simple, now it's not. I also think the faces feature is a waste of time and you can't disable it. Overall i am not happy with this new product i had to pay for. I had to update the iphoto i loved because they stopped letting you send your photo's to be printed from it. Apple is failing. It seems they are more after new sorces of revenue then keeping a good product.

Did you have a question?
I don't use the Faces feature, nor the Places one either, but I don't find them a waste of time. There's nothing to disable, just don't use them. Burning to optical media is going the way of the floppy disk. New computers of every brand are showing up now without optical drives. In five years you'll have trouble finding a computer with a built-in drive to buy and in 10, you'll find it hard to get a drive that will play optical media at all. iPhoto 08 was released in 2007 and that means they supported online printing services for 6 years. The installed base of iPhoto 08 is so small now that it's not worth their while. How you get from your inconvenience to "Apple is failing" is not clear to me. iPhoto 11 is a much more capable application that 08, complete with full non-destructive editing.

(V7.3)RDBMS 7.3 Enterprise Edition NEW FEATURE에 대한 Q&A

제품 : ORACLE SERVER
작성날짜 : 2004-08-13
(V7.3)RDBMS 7.3 Enterprise Edition NEW FEATURE에 대한 Q&A
=========================================================
1. Q) Oracle 7 Release 7.3의 new feature들을 간단하게 알고 싶습니다.
A) 다음과 같이 요약하여 설명드리겠습니다.
New features of 7.3.3 are :Direct load to cluster
Can use backup from before RESETLOGS
New features of 7.3 are :histograms
hash joins
star join enhancement
standby databases
parallel union-all
dynamic init.ora configuration
direct path export
compiled triggers
fast create index
multiple LRU latches
updatable join views
LSQL cursor variable enhancement
replication enhancement
ops processor affinity
Net 2 load balancing
XA scaling/recovery
thread safe pro*c/oci
DB verify
new pl/sql packages
new pl/sql features
bitmap indexes
2. Q) Oracle 7 Release 7.2와 7.3의 새로운 Parallel feature에는 어떤 것이
있습니까?
A) Oracle 7 parallel query 에 의한 parallel operation에는 다음과 같은 내
용이 있습니다.
> Parallel Data Loading : conventional and direct-path, to the same
table or multiple tables concurrently.
> Parallel Query : table scans, sorts, joins, aggregates, duplicate
elimination, UNION and UNION ALL(7.3)
> Parallel Subqueries : in INSERT, UPDATE, DELETE statements.
> Parallel Execution : of application code(user-defined SQL functions)
> Parallel Joins :
nested loop,
sort-merge,
star join optimization(creation of cartesian products plus the
nested loop join),
hash joins(7.3).
> Parallel Anti-Joins : NOT IN(7.3).
> Parallel Summarization(CREATE TABLE AS SELECT) :
query and insertion of rows into a rollup table.
> Parallel Index Creation(CREATE INDEX) :
table scans, sorts, index fragment construction.
3. Q) Release 7.2와 7.3에서 추가된 optimization 기능에는 어떤 내용이 있습
니까?
A) 다음과 같은 기능들이 있습니다.
1> Direct Database Reads
Parallel query 프로세스들은 필터링이나, 소팅, 조인과 같은 작업을 수행하
기 위해서는 아주 큰 테이블을 scanning해야 합니다. Direct Database Reads는
read efficiency와 성능의 향상을 위해 contiguous memory read를 가능하게 해
줍니다. 또한, concurrent OLTP와 같은 작업을 수행시 따르는 경합을 없애기 위
해 버퍼 캐쉬를 bypass합니다.
2> Direct Database Writes
Parallel query 프로세스들은 intermediate sort runs, summarization
(CREATE TABLE AS SELECT), index creation(CREATE INDEX)과 같은 작업의 수행
결과를 디스크에 종종 기록해야 합니다.
Direct Database Writes는 write efficiency와 성능의 향상을 위해 direct
contiguous memory로 하여금 contiguous disk writes를 가능하게 해줍니다.
또한, concurrent OLTP 작업과 DBWR 프로세스에 의한 경합을 없애기 위해 버
퍼 캐쉬를 bypass합니다.
결론적으로, Direct Database Reads와 Writes는 concurrent OLTP와 DSS 작
업에 따르는 복잡한 부하를 조절하면서 Oracle 7 서버를 분리된 형태로, 또한 최
적의 튜닝을 가능하게 해줍니다.
3> Asynchronous I/O
Oracle 7은 이미 sorts, summarization, index creation, direct-path
loading 에 대한 asynchronous write 기능을 제공하고 있습니다.
Release 7.3부터는 보다 나은 성능의 향상을 위해 asynchronous read-ahead
기능을 제공하여 최대한 processing과 I/O의 병행성을 증가시켜 줍니다.
4> Parallel Table Creation
CREATE TABLE ... AS SELECT ...와 같은 구문을 제공하여 상세한 데이타를
갖는 큰 테이블의 조회된 결과를 저장하기 위해 임시 테이블을 생성합니다.
이 기능은 보통 intermediate operation의 결과를 저장하기 위해 drill-down
분석을 할 때 사용됩니다.
5> Support for the Star Query Optimization
Oracle 7은 수행 속도의 향상을 위해 star 스키마가 존재하고, star query
optimization을 invoke합니다. Star query는 먼저 여러 개의 작은 테이블을
join하고, 그런 후에, 그 결과를 하나의 큰 테이블로 join합니다.
6> Intelligent Function Shipping
Release 7.3부터 parallel query를 처리하는 coordinator 프로세스는
non-shared memory machine(cluster 또는 MPP) 내의 노드들을 처리하기 위해
디스크나 데이타들 간의 유사성에 대해 인식하게 될 것입니다.
이 사실에 근거하여, coordinator는 data들이 machine의 shared
interconnect를 통해 전달될 필요가 없다는 점에서, 특정 node-disk pair로 수
행되고 있는 프로세스들에게 parallel query operation을 지정할 수 있습니다.
이 기능은 연관된 cost나 overhead없이 'shared nothing' 소프트웨어 아키텍
쳐의 잇점을 제공하면서 효율성과 성능, 확장성을 개선할 수 있습니다.
7> Histograms
Release 7.3부터 Oracle optimizer는 테이블의 컬럼 내에 있는 데이타 값의
분포에 관한 더 많은 정보를 이용할 수 있습니다. Value와 상대적 빈도수를 나타
내는 histogram은 optimizer에게 index의 상대적 'selectivity'에 관한 정보와
어떤 index를 사용해야할 것인가에 관한 더 좋은 아이디어를 제공해 줄 것입니다.
적절한 선택을 한다면, query의 수행시간을 몇 분, 심지어 몇 시간씩이나 단축
시킬 수가 있습니다.
8> Parallel Hash Joins
Release 7.3부터 Oracle 7은 join 처리시간의 단축을 위하여 hash join을 제
공합니다. 해슁 테크닉을 사용하면 join을 하기 위해 데이타를 소트하지 않아도
되며, 기존에 존재하는 인덱스를 사용하지 않으면서 'on-the-fly' 라는 개념을 제
공합니다.
따라서, star schema 데이타베이스에 전형적으로 적용되는 small-to-large
테이블 join의 수행 속도를 향상시킬 것입니다.
9> Parallel UNION and UNION ALL
Release 7.3부터 Oracle 7은 UNION과 UNION ALL과 같은 set operator를 사
용하여 완전히 parallel하게 query를 수행할 수 있습니다. 이러한 operator를 사
용하면, 큰 테이블들을 여러 개의 작은 테이블의 집합으로 나누어 처리하기가 훨
씬 쉬워질 것입니다.
4. Q) Release 7.3에는 어떤 제품들이 있습니까?
A) Oracle 7 서버 Release 7.3.3에 대한 제품 리스트는 다음과 같습니다.
단, 모든 플랫폼들이 리스트된 모든 제품들을 지원하지는 않습니다.
[ Product ] [ Revision ]
Advanced replication option 7.3.3.0.0
Parallel Query Option 7.3.3.0.0
Parallel Server Option 7.3.3.0.0
Oracle 7 Server 7.3.3.0.0
Distributed Database Option 7.3.3.0.0
Oracle*XA 7.3.3.0.0
Oracle Spatial Data Option 7.3.3.0.0
PL/SQL 2.3.3.0.0
ICX 7.3.3.0.0
OWSUTL 7.3.3.0.0
Slax 7.3.3.0.0
Context Option 2.0.4.0.0
Pro*C 2.2.3.0.0
Pro*PL/I 1.6.27.0.0
Pro*Ada 1.8.3.0.0
Pro*COBOL 1.8.3.0.0
Pro*Pascal 1.6.27.0.0
Pro*FORTRAN 1.8.3.0.0
PRO*CORE 1.8.3.0.0
Sqllib 1.8.3.0.0
Codegen 7.3.3.0.0
Oracle CORE 2.3.7.2.0
SQL*Module Ada 1.1.5.0.0
SQL*Module C 1.1.5.0.0
Oracle CORE 3.5.3.0.0
NLSRTL 2.3.6.1.0
Oracle Server Manager 2.3.3.0.0
Oracle Toolkit II(Dependencies of svrmgr) DRUID 1.1.7.0.0
Multi-Media APIs(MM) 2.0.5.4.0
OACORE 2.1.3.0.0
Oracle*Help 2.1.1.0.0
Oracle 7 Enterprise Backup Utility 2.1.0.0.2
NLSRTL 3.2.3.0.0
SQL*Plus 3.3.3.0.0
Oracle Trace Daemon 7.3.3.0.0
Oracle MultiProtocol Interchange 2.3.3.0.0
Oracle DECnet Protocol Adapter 2.3.3.0.0
Oracle LU6.2 Protocol Adapter 2.3.3.0.0
Oracle Names 2.0.3.0.0
Advanced Networking Option 2.3.3.0.0
Oracle TCP/IP Protocol Adapter 2.3.3.0.0
Oracle Remote Operations 1.3.3.0.0
Oracle Named Pipes Protocol Adapter 2.3.3.0.0
Oracle Intelligent Agent 7.3.3.0.0
SQL*Net APPC 2.3.3.0.0
SQL*Net/DCE 2.3.3.0.0
Oracle OSI/TLI Protocol Adapter 2.3.3.0.0
Oracle SPX/IPX Protocol Adapter 2.3.3.0.0
NIS Naming Adapter 2.3.3.0.0
NDS Naming Adapter 2.3.3.0.0
Oracle Installer 4.0.1

P.S. I have checked the CD rom itself by doing the installation in our classroom on a Windows XP Pro machine and it loaded like a charm. I have been emailing and calling Compaq customer support on this issue, and I've done everything they've suggested, including a Quick Format of the hard drive. I am still getting the same results. I have been able to load a small program (Palm Desktop) on the Compaq without a problem, so I don't think it's the CD drive that's the problem, either. Thanks for any help you can give me!!! Deborah

Where can I send an idea for a new feature.

I have an idea for a new feature in Illustrator. I'd like to share it to the developers.
Is there a channel to send your idea?
Thank you!

Thanks for the replies.
I know that this feature does not serve everybody, but I could use it on a weekly basis.
I don't know if there is a script for this, and if there is, plese let me know it.
Transparent working window.
So I could set my whole artboard window transparent and still work on it.
I could easily and fast trace some shapes from locked PDF's and also directly from the browser without copying the image to my computer.
The problem is, of course, that Zoom would only work in the graphics in the Illustrator (needless to say) and would not affect to the graphics behind the Illustrator window.
But still I think I could use it very much.
For examble I could manually draw simple shapes and logos straight from the customers website, without downloading the poor JPG image.
Please let me know what you think about it.
Sorry if there is some mistakes, English is not my native.
I hope you got the point.

Got an idea for a new feature or feature improvement?

Our FAQ contains a list of in progress and unfinished features, so please check that out.
We're interested in hearing from you on how we can improve Parfait by improving or adding a new feature. Please provide as much detail as possible, and make sure to tell us why it is important to you. If your idea is for a new feature, it would be helpful to understand how you get it done now, and how the new feature would make your life better.
Thanks!
Bruce
Parfait product manager

Helo Kieran,
• Integration with Creative Cloud or LayerVault (LV would be nice for versioning etc.)
BB> We're working on integrating with Creative Cloud. You'll get versioning, commenting, sharing (file or folder level), and sync. We expect to be able to roll this out later this year.
• Importing guides from the .PSD as well as having the rulers on the sides
BB> Good idea, and we're considering this. For now, some people are creating guides on a layer in Ps, then toggling that layer's visibility in Parfait.
• When doing a Shift + Click on two elements, depending on the circumstance, spit out the margin or padding values into the CSS panel
BB> This is also something we've considered. We think this should be done in combination with adding support for guides or another temporary measurement aid, so you can position the container around an item to make sure you get the info you want. Still working out design and details on this one, and no ETA.
• Having something like a marquee tool to measure between two points (I know this can be done using the Shift+Click but some elements aren't accurate eg. images inside clipping masks)
BB> Yes, we're considering this, as I mentioned in the point above.
• The tags that are created when you select a font in the right-hand-side panel are black with a white "T", it's quite hard to see (not really a feature but I thought it was worth mentioning )
BB> Thanks for the feedback, and we'll take another look at them to see if we can improve.
And thanks for offering to help with testing - we are improving Parfait and pushing out new builds frequently, so please check back often and let us know what you think.
Bruce
Parfait product manager

New Features for OWB 9.2

Mark Van De Wiel mentioned yesterday in this forum that OWB 9.2 is now available at http://otn.oracle.com/software/products/warehouse/content.html . From the version number it would appear that this is a major new release, and it's a separate install rather than a patch on OWB9.0.4.
Would Mark, Igor or Shauna be able to give us some background on the new features in this new release? From quickly looking at the release notes they would appear to be;
- Correlated Commit (committing changes across all targets uniformly)
- Ability to create public database links
- Direct PEL (removes the need for temporary tables when exchanging partitions)
- Enhanced Flat File Support
- Mapping Debugger
- Incorporation of ETL functionality previously found in standalone Pure*Integrate
- Metadata change management using the OWB GUI rather than using OMB*Plus
- Multiple Name and Address Software Providers
- Name/Address Wizard
- New Public API for OWB
- Better support for Real Application Clusters
- Advanced Repository Security and Audit options
- Support for MITI metadata bridges to third-party products
It would be good to know the thinking behind these and what areas they think will be particularly of interest to us. Also, has anything been removed or changed that we've got used to using?
Also, any day now (fingers crossed) the patch to make the OLAP functionality in OWB9.0.4 work (the 9i 9.2.0.3.x patch?) should be out - will this work with OWB9.2 as well?
Many thanks
Mark Rittman
[email protected]

Hi Mark,
While I'm not in your list of people to respond I figure I give it a go anyways :-)
The list of features you mentioned is a nice summary. One of the main release themes is data quality as you noticed. Apart from changes to the name&address functionality we also added the advanced matching and merging into this release. So you can use custom rules to match and merge data. This also allows you to do things like householding for customer data records. In essence we have now completed the integration of Pure*Integrate into Warehouse Builder.
The mapping debugger is another big thing. This allow you to walk through your mappings and see in detail what happes to the data.
The metadata change management is now in the UI. THis means there is now object level version management in Warehouse Builder via the UI. You can also compare versions and get a difference report.
As you mentioned there are a number of smaller and bigger features next to this. The idea for this release is to make OWB a top Data Quality product and allow you to do your ETL and DQ in one tool. Apart from that we have added usability features (debugger, N&A wizard) and we have added some features to solve specific problems.
Especially the corelated commit is interesting in that respect. You can now, in a map with multiple targets control the commit, and choose to either commit all targets or none, or commit them individually (current behavior).
As usual there is a lot more, as this is indeed a major release. Keep an eye on OTN for more collateral regarding the new features. We are currently updating the site to reflect the new stuff.
On the OLAP patch, both 9.0.4 and 9.2 will work equally well with the OLAP patch (when it is available). In 9.2 we added some small thing around composites. More about that when there is an OLAP patch to test this one on in a customer site.
I hope this answered the question, if not let me know.
Jean-Pierre

I Think of New Feature

Similar Messages

Maybe you are looking for