I took a video using a tripod and I want to blend the video with a copy of the same video. How do I do that without making the video darker or lighter while keeping the opacity of the main video?

I dont want to the people in the main video to become transpartent (ghostly) I only want that to happen with the copy that I am overlaping. The copy will not be at the same starting point as the original, it will be slightly ahead. Everything ive tried has left the video lighter or darker then the original and it looks weird, it was used with a tripod so nothing changes in the video except for the posiioning of the people. I want to have like a trailing affect following the people, like you can get with your cursor on some computers its like its lagging behind? Its hard to explain, I hope this made some sense.. any suggestions would be great thanks.

Since you are disolving two shots together (rather than compositing or keying) it seems like you will always have some slight noticeable opacity as you are effectively bleinding two shots together at 50% opacity each. There is no way to maintian 100% short of keying or compositing. However with the background being the same in both shots the opacity shift should be very minimal.
Although you might consider trying the built in trailing effect in the filters browser and see how it looks, it might achive the effect you are attempting better than blending the two shots.

Similar Messages

I got a new ipod and i want to play it on my computer but its not letting me, how do i change that?

So I got my iPod stolen and I just got a new one but when i plug it in the computer, i get the libary but if I click on music in device, its not letting me my songs from there and its not letting me add music and I want to know why and how can I change it?

Does the iPod appear in iTunes?
B-rock

I just got a macbook pro and i want to transfer my iPad to be synced to my new computer how do i do that?

i just got a new 13 MBP and i have an iPad 2 and want to transfer the back up and iPad syinc from my new MBP from my MacBook. is there a way of doing that with out deleating the iPad's data?

Copy everything from your old computer or your backup copy of your old computer to your new one, then sync.

Im trying to use internet banking and it want go through the finial stage after secruity input?

Im trying to get onto my internet banking but it will not go passed the final stage of secruity, but only on lloyds banking site. other banking sites work??

Safari > Preferences > Privacy > Block cookies and other website data:
Select "Never".
Now try.
System Preferences > Security & Privacy
Allow apps downloaded from:
Select "Anywhere" for this.
Revert back soon after.
Best.

I have a lot of bookmarks, and I want to search them, similar to a file search on my computer; how can I do that? Please say it can be done.

I need to be able to search my Firefox bookmarks. For example, I know I have a bookmark with wot in the name of it, but for the very life of me I cannot find it amongst all the bookmarks I have. There must be around a thousand (not exaggerating). I have no idea at all where I have saved it, and I know it's there, but I cannot find it.
So how do I search my bookmarks similar to like I would search my computer for files?
If FF doesn't have this capability, could you PRETTY PLEASE consider adding this functionality?

Firefox does allow bookmark searching. From the 'Bookmarks' menu select 'Show all Bookmarks' (Ctrl + Shift + B). A new window will open showing the Bookmarks library. At the top right corner is a search box.
Also, by default, when you start typing an address into the location/address bar at the top, Firefox suggests links from history & bookmarks. So you should be able to find it just there too. Click [[Awesome Bar - Find your bookmarks, history and tabs when you type in the address bar|here]] to know more.

HT1212 my wife bought a use iphone 4 and we want to sync my apple account and music to her phone.

my wife bought a use iphone 4 and we want to sync the music in it. how?

Open itunes, connect iphone, select what you want, sync

HT201263 When my Ipod touch is in autolock I can only restart the device holding the sleep/wake button and home button at the same time for 10 seconds. While in auto-lock it is using battery power and will do so until the battery is drained. Whats wrong

When my Ipod touch is in autolock I can only restart the device holding the sleep/wake button and home button at the same time for 10 seconds. While in auto-lock it is using battery power and will do so until the battery is drained. Whats wrong?

- Try a reset. Nothing is lost:
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Connect the iPod to your computer and try to restore via iTunes. Try placing in Recovery mode if necessary to restore.
- If you can't turn the iPod completely off, let the batter fully drain. After charging for at lerast anhour try again
- If still not successful time for an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.

Hey there i downloaded apps using another apple id than the one am using right now and i need to update the apps they keep asking me for the old one that i dont have any more what to do please

Hey there i downloaded apps using another apple id than the one am using right now and i need to update the apps they keep asking me for the old one that i dont have any more what to do please

Apps are permanently tied to the ID used to purchase them.
Go to https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/ and re-set th password for the old one.
Then, log into the app store with it and update the apps purchased with that ID.

HT201412 i have an iphone 4s and it just turned off and wouldnt turn back on until i got home and plugged it in to the mains. however it wont connect to my carrier and wont let me turn wifi on or use the internet. all my data is still in place, please HEL

i have an iphone 4s and it just turned off and wouldnt turn back on until i got home and plugged it in to the mains. however it wont connect to my carrier and wont let me turn wifi on or use the internet. all my data is still in place. however when i disconnect from the charger it switches straight off immediately. it also just flashes up the apple icon (on 10 seconds, off 10 seconds.......) when i connect to either car charger or computer. it also resets itself every single time i turn it back on using the mains charger. please help me understand what is happening to my phone
is there anything apple could do if i took it to one of their main shops???
Kris (bulzy_23)

Sounds like a hardware failure.
Make an appointment at the genius bar and take it in for them to look at. It will probably need to be replaced.

Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player. Does anyone know how to get around this?

Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player. Does anyone know how to get around this? I don't know how to wipe the hard drive, and the support online doesn't seem to work.

As posted previously:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
If installing Leopard the process is similar in some respects. If you wish to begin anew then after selecting the target disk click on the Options button and select the Erase and Install option then click on the OK button. To install over an existing system do the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Hey guys ! I use logic pro ... not logic proX ... and i want to record my drums with 4 mics. I got a mixer with also 4 inputs ( Behringer Xenyx QX 1202USB ) But in my Logic i can't take the third input !?!? i can only choose 1 and 2 .... Please Help :)

hey guys ! I use logic pro ... not logic proX ... and i want to record my drums with 4 mics. I got a mixer with also 4 inputs ( Behringer Xenyx QX 1202USB ) But in my Logic i can't take the third input !?!? i can only choose 1 and 2 .... Please Help

Friedrich sp wrote:
Can you send me a mixer wich can do that, please ?
Who do you think I am? Santa Claus?
What you need is not a mixer, but an audio interface with at least 4 mic inputs. There is a lot of choice there, but you should indicate a budget. You can go from, say, € 300 to € thousands, if you want.
Roland UA 1010
Focusrite Scarlett 18i8
However, there are other options (like multi-out mixer plus multi in interface, or standalone mic preamps plus interface with 4 inputs, etc). I have little experience using these however so I really cannot say much about which one(s) to get. The two mentioned above both have four mic preamps, but they are by no means the only way to do it.
The cheapest solution I can think of is to get a second 1204USB, plug it in, and in OS X create an Aggregate device (=the two are being merged into 'one virtual' interface with two discrete stereo (= four discrete mono) inputs. Disadvantage: you keep the same (limited) soundquality of the 16 bits convertors. Getting any of the interfaces mentioned earlier will also mean you'll make the significant step up from 16 to 24 bits sound.

HT4623 I still have an iPad 1, and need to update to iOS 7 to use Keynote, Pages and Numbers but I get the message the my system is updated in iOS 5.1.1 and doen's offer me another update!

I still have an iPad 1, and need to update to iOS 7 to use Keynote, Pages and Numbers but I get the message the my system is updated in iOS 5.1.1 and doent's offer me another update! How can I update it? Or I can't?

ayrosa wrote:
I still have an iPad 1, and need to update to iOS 7
Sorry... This is not possible. The iPad 1 can Only go as far as iOS 5.1.1

I am pulling my hair out! I am using adobe indesign and just want to make a text box 'autofit text' as I change fonts a lot and want the font to automatically re-size as I change it. help help help please - I have latest version of indesign - thanks

I am pulling my hair out! I am using adobe indesign and just want to make a text box 'autofit text' as I change fonts a lot and want the font to automatically re-size as I change it.
Is it not possible to create a text box, fill it with dynamic (data driven) text, but make the font size either scale up or down automatically, so that the entire text box is filled? This is a feature in PrintShop Mail Pro called COPY FIT. but no such feature in Indesign??
help help help please - I have latest version of indesign - thanks, DJ

lol... it seems to work, but I have another huge problem!
Apparently .CSV files cannot contain page breaks in the data! The data I am trying to merge is a 'letter', with paragraphs, line breaks, etc.,
But, after data merging, it ignores page breaks and only merges the first paragraph of each letter. (sigh)
Solution? Hopefully, an EASY solution. lol as we have thousands of records.
Is there a third party indesign plugin that will allow .xml, or .xls data merge import??
Thx,
DJ

I want to use my IPOD Classic 160gb for notepad entries in addition to the music and books I listen to. It is set to "Open ITunes when connected to computer" and "manually manage music and videos". How can I do that without losing some of the features

I want to use my IPOD Classic 160gb for notepad entries in addition to the music and books I listen to. It is set to "Open ITunes when connected to computer" and "manually manage music and videos". How can I do that without losing some of the features of those two? I just want to add a feature. Thanks

Settings>Store (or iTunes & App Stores if you are running iOS6)>Apple ID. Tap your son's ID and sign out. Sign in with your ID and password.
You shouldn't lose the music, but if you try to update any apps that you bought with the family ID, you will have to use that password that is linked with that ID in order to update.
Avoid downloading past purchased content with the old ID if you can since you will associate the iPad with the old ID for 90 days and you will lock yourself out of your own, new ID for that period of time. Read more about associated devices in iTunes here.
iTunes Store: Associating a device or computer to your Apple ID

My Adobe trial for Photoshop Elements 10 for the Mac was over and I wanted to buy the application. The screen message was "Your trial has expired...but the fun doesn't have to end! Buy now to continue using Photoshop Elements 10 without having to download

My Adobe trial for Photoshop Elements 10 for the Mac was over and I wanted to buy the application. The screen message was "Your trial has expired...but the fun doesn't have to end! Buy now to continue using Photoshop Elements 10 without having to download or re-install. " and then the button "Buy Now". When I hit the Buy Now button I am put in a field to buy Photoshop Elements 13, with no way to change to Elements 10. I do not want to go through the hassle of reinstalling etc. In fairness, it's been over a month since making the decision to buy. Still, I consider this a nightmare. Any ideas on how to buy the app I've got withou having to purchase a whole new one? Thanks.
If worse comes to worse, will I need to uninstall the trial if I buy a new version? Can I use part of it lime download assistant?

Adobe does not sell older versions of their software. If you wish to purchase an older version you will have to find and take your chances with a third party vendor.

I took a video using a tripod and I want to blend the video with a copy of the same video. How do I do that without making the video darker or lighter while keeping the opacity of the main video?

Similar Messages

Maybe you are looking for