I took My iPod to this place at The milpitas mall And they replaced my brokend screen I had it for a week it shut off and I could not turn it on any more decided to take it back they told me to leave and they would call me they stole it what can I do?

What can I do if they don't want to guide it back at me

Report it to the police. If they are a shop in the mall they should be easier to track down (the trick is seeing if the police will take the case).
In the future I would not deal with unauthorized shops. Only deal with Apple or AASPs (Apple Authorized Service Providers). It may cost more but you don't run the risk of getting scammed or having faulty work done.

Similar Messages

  • Hi i was using safari one day and my ipod randomly shut off it will now not turn back on i tried hard resting and everything else when i plug the ipod into a charger it gets really hot in the left corner and itunes did not recognize

    hi i was using safari one day and my ipod randomly shut off it will now not turn back on i tried hard resting and everything else when i plug the ipod into a charger it gets really hot in the left corner and itunes did not recognize any help will be apreciated thank you

    Try placing the iPodin recovery mode and then try to restore the iPod via iTunes on your computer.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    Next would be to make an appointment at the Genius Bar of an Apple store since you likely have a hardware problem.

  • I'm having trouble updating my iphone 4 since i updated to 4.3.3 i can't update it anymore. right now when i connect it to my itunes, itunes freezes for about 5 minutes then says something like "could not load sync service" any ideas on what i shud do?

    I'm having trouble updating my iphone 4 since i updated to 4.3.3 i can't update it anymore. initially itunes would let me go so far as downloadin the new software then an error poped up as soon as the download finished, and now when i connect it to my itunes, itunes freezes for about 5 minutes then says something like "could not load sync service, reconnect or try again later" any ideas on what i shud do?

    Did you try to connect in recovery mode? iPhone and iPod touch: Unable to restore

  • Upgraded and could not use purchased music any more

    I upgraded to itunes6 yesterday and everything went well until I tried to update my ipod. an error msg came up and told me that i could not add all of my music to my ipod. it said that the software was to old. the music that i lost was the music that i had purchased from itunes. i have the 4 button 15GB ipod and just wanted to know if anyone else has had this problem

    I also upgraded to the new itunes and when I went to play music I had purchased from the old Itunes I was told that I was not able to play the music because I was not authorized or some such....then of course I also am unable to connect to the Itunes store and in general the new Itunes is really poor. I also updated my quick time and I think that was another mistake. I have not tried to hook my ipod up nor will I until I can figure out mess.

  • My computer comes on but with the loading bar under the apple logo. The bar only loads partially and then the computer shuts off. I've tried turning it on again more than 5 times and the same thing happens. Does anyone know how to fix this?

    My computer comes on but with the loading bar under the apple logo. The bar only loads partially and then the computer shuts off. How do I get this fixed?

    If you are still under warranty and/or have AppleCare, call them.  Let them deal w/it.
    OOW:  Please advise of which model iMac you have?
    http://support.apple.com/kb/HT1758 How to identify iMac models
    OS X Mavericks (10.9)
    If/when you get your problem resolved, you need to update your OS.

  • As I like open a file it coms message This document cannot be open because is it too old. First open by Pages 09 What I have to do?? I do not have Page 09 any more.

    As I like open a file it coms message 
    "This document cannot be open because is it too old. First open by Pages 09"
    What I have to do?? I do not have Page 09 any more. I've got Pages Vers.5.0.1

    I suspect you have created the documnet's in Pages 08 or earlier. Do you have the iWork 08 DVD so you can install it? Then update to from this link Pages 08 3.0.3  Use it for you older documents and use Pages 5 only for new documents.

  • When I try to delete page(s) from a PDF document I created, I geth the following message: "One or more pages are in use and could not be deleted." Any suggestions?

    When I try to delete page(s) from a PDF document I created, I geth the following message: "One or more pages are in use and could not be deleted." Any suggestions?

    I sent an email to TerraGo Support and they sent the following response: "This has bug has been discovered and our development team is quickly creating a patch to resolve the problem. The patch should be available within a week or two. For your reference, the bug number assigned to this case is: 3620. Check back in about two weeks and hopefully the patch will be available. Again, I apologize for the inconvenience."

  • HT201303 payment method i do not have credit card any more

    hi
    i do not have credit card any more so when i want to update my apps in my iphone it say (((tap continue and sign in to view billing information)) so i taped continue  it take me to payment method so i do not have credit card any more so what is should do ??? i really need your help im not in usa right now i do not know when im came back so pleas help to fix this 
    thank you so much 

    Consider setting up a paypal account.  You can use your bank information to create an account and then itunes can bill you to paypal who will automatically debit your bank account as needed.

  • The software could not be found on any servers at this time

    Hello,
    Within the last few days OSD from within the OS has started to fail. The error it provides is
    The software could not be found on any servers at this time. I find this error misleading since I can PXE, connecting to the same server, and the OS installs without issue.
    For giggles I did try and install some updates and other software from the server and they installed using Software Center. With that my boundaries are setup and the client is communicating with the DP.
    Distribution Point='http://<server.domain>/SMS_DP_SMSPKG$/Content_f90faa01-0846-4704-9d86-d788273ab397.1', Locality='LOCAL' ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_50cea2c8-29cb-48c4-830b-571f72e14c04.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_d5a14c61-8ab2-4ec9-808a-ab6f89ab56f8.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_0ea10922-95d6-4751-a3da-3dab19e70fa4.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_310e7d49-0dd2-479b-886d-9c822ff214c4.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_cc2d6253-a90d-489b-b294-7eb3ed645029.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_a41d3047-5a90-400b-bc76-7808ff0c8503.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_fed1abf3-ab3b-45ef-9c20-8a419c2a13b6.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_879fade3-5b18-4959-bb2b-bc8a9bed1f71.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_16bba65e-16a6-49bd-b757-536e65ff94f1.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_4a8abdc6-2c2e-4f4c-b2ab-38306ba90425.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_0b1e115f-d8cf-4b2a-944e-bdd888c1775e.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_384b9d17-1502-467a-99ca-2669f0d1b5c7.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_68117c8a-50c3-4b95-9e3e-965238fe749a.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_a38b2000-a2d6-4974-8409-827a76ad1b17.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    The number of discovered DPs(including Branch DP and Multicast) is 0 ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    I have a feeling the final line is the indicator to my problem, but I dont understand why. Unfortunately this seems to be happening at other sites as well.
    Edit
    I checked the boundary groups and made sure that they had at least 1 site server assigned. I also checked the permissions of Production (not-working) to Test (working) and they line up. When I choose 1 application/update to install the line
    The number of discovered DPs (including Branch DP and Multicast) is 0
    changes to 1. I also do not have the servers DP set to pre-deploy, if I recall that is the wording on the first tab of the DP settings. Also browsing the HTTP address provides results.

    Hi,
    The task sequence for unknown and known is the same.
    That is what I want to confirm. I did more research, and some indicate boundary issue:
    https://social.technet.microsoft.com/forums/systemcenter/en-US/75b22009-48ea-43b6-8992-b1f3d3bbe51c/the-software-could-not-be-found-on-any-servers-at-this-time
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • My assist button does not access vaio care any more help

    need help assist button does not activate vaio care any more please help me

     
    Hi westlyeaton, 
    Welcome to Sony Community! 
    I believe you were referring to Vaio Care Rescue Mode, right? To access the recovery partition. Is the Assist button stuck from being pressed? 
    Try to Power Cycle the laptop - Remove the battery and all peripherals -> press and hold the power button for 5 seconds OR, if the battery is not removable, remove all peripherals-> look for a battery off button on the bottom of the laptop -> push the button for 5 seconds
    Try to press the Assist button while the unit is on. There are certain models where Vaio Care (Desktop) will open when pressing Assist while the computer is on. Then test while the unit is off. 
    Let us know if this will work. 
    Thanks,
    Vincent 
    If my post answers your question, please mark it as "Accept as Solution"
     

  • It says I've got 12,3 GB free space left, of my total 25GB. But my iPhone tells me there is no more space to take pictures or download stuff. It clearly says I have 12,3 GB left. What's the issue here??

    It says I've got 12,3 GB free space left, of my total 25GB. But my iPhone tells me there is no more space to take pictures or download stuff. It clearly says I have 12,3 GB left. What's the issue here??

    The issue is probably space on the phone, not in your iCloud account.  (Space in your iCloud account does not give you more space on your phone.)  Check Settings>General>Usage at the top to see how much available space you have.  If it's low, you'll have to delete or sync something off our phone to make room for more. 

  • PCNS -- forest Subdomain -- the SPN you Specified could not be found on any accounts in this domain

    Hello there Fim lovers,
    i'm having few issues with PCNS hope you can help out,
    so my Active directory Infrastrucutre is made out of a Root Domain "company.net" and lots of subdomains
    "sub1.company.net", "sub2.company.net" ....
    the FIM Server and service accounts are all in the Root domain and my users are in the subdomains as is the case usually...
    i ran the setspn on the service account in the root domain then ran the pcnscfg on the subdomain DC where my users are stored...
    i get the following warning : 
    The Service Principal Name you specified could not be found on any accounts in this domain. (which is normal since the service account is in the root domain)
    did i do smthn wrong ? or can i ignore this warning ?
    thanks for any help !!!
    Hitch Bardawil

    Hi,
    Check this note - KBA 1671522, it holds good for RFC also.
    Arun

  • My IPod will not sync with my computer.  The word IPod appears in the bar at the top right area of the screen, then a message box appears stating that my IPod could not be found.  Any suggestions?

    My IPod will not sync with my computer..The work IPod appears in the upper right area of the Itune window, then a message box appears stating that 'download could not be copied to the IPod because it could not be found'.  Any suggestions?

    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reboot the computer
    - try another cable
    - Try another USB port
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • My time machine does not want to save any more the data from my powerbook 13" Snow Leopard; i get the message "Time Machine could not suppress the disk image of saving "Volumes/Time Capsule Disk/PowerBook _2011_03_21_123627 sparsebundle" What should I do?

    My time machine does not want to save any more the data from my powerbook 13" Snow Leopard; i get the message "Time Machine could not suppress the disk image of saving "Volumes/Time Capsule Disk/PowerBook _2011_03_21_123627 sparsebundle" What is the problem? What should I do?
    Thanks !!
    Alain

    Could that read " . . . could not access . . ."?  If so, try repairing your backups, per #A5 in Time Machine - Troubleshooting.
    If not, or if that doesn't help, see #A1 there. Use the TM Buddy widget it details to copy and post the messages here.

  • I used to have an ipod i downloaded tons of songs from apple then i moved to iphone i made a new id. today i decided to take a look at my old Apple ID and i saw all my old songs. i tried to re-download them and it said "Your Apple ID has been disabled"

    i used to have an ipod i downloaded tons of songs from apple then i moved to iphone4 i made a new id. today i decided to take a look at my old Apple ID and i saw all my old songs. i tried to re-download them and it said "Your Apple ID has been disabled" please help. my password is not an issue i put in new payment method PLEASE HELP

    1. Don't confuse "Apple ID" with iTunes Account ID.  You can have many Apple IDs but only one iTunes account active at a time.
    2. If you "changed" your iTunes account ID, you actually have 2 accounts - one under the old name plus the new name.
    3. You can't merge the accounts - they remain separate.  Apps purcahsed under the old account name will update ONLY WHEN THE PHONE IS SIGNED IN TO THE OLD ACCOUNT NAME  and visa versa.
    4. Likewise, you can sync only the apps, music, media purchased under the account the phone AND iTunes are signed in to.

Maybe you are looking for