I-touch no longer recognized by Windows XP Pro

It will still charge up on the computer but the computer doesn't not recognize it in My Computer. Also, when I try to run diagnostics on I-Tunes it tells me the device is not plugged in. I've tried the trouble shooting assistant but that doesn't help me. I've also tried this link, but the computer still doesn't recognize the I-touch. http://support.apple.com/kb/TS1495
Everything worked fine until I let the battery go completely dead. When I plugged it into the computer to charge, I got an error message and the computer never recognized the I-touch again.

Since Apple Mobile Device Services is the piece of software responsible for communicating with your touch, is it operating correctly? Refer to this article to troubleshoot that service: http://support.apple.com/kb/TS1567
If you need to, do not hesitate to uninstall iTunes, Apple Mobile Device Services, and Quicktime. Be sure you reboot your computer before downloading and installing the latest version of iTunes.

Similar Messages

Zen Touch No Longer Recognized By Windows Media Pla

My Zen Touch stopping being recognized by Windows Media Player today. I still see the MTP connected icon in the task tray and I still it listed without a warning in Device Manager, but WMP doesn?t recognized that it is attached. I?ve tried different USB ports and a different USB cable. There are no errors in the application log. I reformatting my device and run the cleanup option, but I still can't WMP to see the device. The only changes I can think of is installing IE7 Beta 2 and installing MusicMatch. I?ve since uninstalled MusicMatch, but I still have the problem. Does anyone have any suggestions? Or there a way I can increase the logging so I can get a better idea of what might be failing.

Hi Ted
I deleted the file and reconnected my device and it quickly grew to 600kb. I'm not sure exactly what you need and there didn't seem to be anything interesting at the end of the log, but I did find the following lines which, from what I can, is from the point when WMP tried to establish a connection with the device and failed.
WPD: 740.544 003 0 0 [WpdMtpDr.dll] ENTERING: Wdf_EvtIoDeviceControlWPD: 740.544 003 0 [WpdMtpDr.dll] Wdf_EvtIoDeviceControl, Wdf_EvtIoDeviceControl: IoControlCode: '0x32504D57'WPD: 740.544 003 0 [WpdMtpDr.dll] ERROR: Wdf_EvtIoDeviceControl, HandleIoControl failed : hr = 0x80070032, 'The request is not supported. 'WPD: 740.544 003 0 [WpdMtpDr.dll] ERROR: Wdf_EvtIoDeviceControl, Completing WDF request with status -07374823WPD: 740.544 003 0 [WpdMtpDr.dll] ERROR: Wdf_EvtIoDeviceControl, WdfRequestComplete failed: c000000WPD: 740.544 003 0 0 [WpdMtpDr.dll] EXITING: Wdf_EvtIoDeviceControlWPD: 5688.336 0843 0 2 [wpdsp.dll] ERROR: IoControlHelper, WdfDeviceIoControl failed, hr = 0xd000000WPD: 5688.336 0843 0 [wpdsp.dll] EXITING: IoControlHelperpCtx = 009AFF0, opcode = 32504d57, inputBuffer = 0344E458, bytesToWrite = 4, outputBuffer = 0349540, bytesToRead = 4, bytesRead = 0344E460WPD: 5688.336 0843 0 [wpdsp.dll] ERROR: CWPDDevice:eviceIoControl, DeviceIoControl failedWPD: 5688.336 0843 0 0 [wpdsp.dll] EXITING: CWPDDevice:eviceIoControlopcode = 32504d57, lpInBuffer = 0344E458, nInBufferSize = 4, lpOutBuffer = 0349540, pnOutBufferSize = 0344E460WPD: 5688.336 0843 0 0 [wpdsp.dll] ENTERING: CWPDDevice:eviceIoControlopcode = 32504d57, lpInBuffer = 0344E458, nInBufferSize = 4, lpOutBuffer = 0349540, pnOutBufferSize = 0344E460WPD: 5688.336 0843 0 [wpdsp.dll] ENTERING: IoControlHelperpCtx = 009AFF0, opcode = 32504d57, inputBuffer = 0344E458, bytesToWrite = 4, outputBuffer = 0349540, bytesToRead = 4, bytesRead = 0344E460WPD: 740.424 003 0 0 [WpdMtpDr.dll] ENTERING: Wdf_EvtIoDeviceControlWPD: 740.424 003 0 [WpdMtpDr.dll] Wdf_EvtIoDeviceControl, Wdf_EvtIoDeviceControl: IoControlCode: '0x32504D57'WPD: 740.424 003 0 [WpdMtpDr.dll] ERROR: Wdf_EvtIoDeviceControl, HandleIoControl failed : hr = 0x80070032, 'The request is not supported. 'WPD: 740.424 003 0 [WpdMtpDr.dll] ERROR: Wdf_EvtIoDeviceControl, Completing WDF request with status -07374823WPD: 740.424 003 0 [WpdMtpDr.dll] ERROR: Wdf_EvtIoDeviceControl, WdfRequestComplete failed: c000000WPD: 740.424 003 0 0 [WpdMtpDr.dll] EXITING: Wdf_EvtIoDeviceControlWPD: 5688.336 0843 0 2 [wpdsp.dll] ERROR: IoControlHelper, WdfDeviceIoControl failed, hr = 0xd000000WPD: 5688.336 0843 0 [wpdsp.dll] EXITING: IoControlHelperpCtx = 009AFF0, opcode = 32504d57, inputBuffer = 0344E458, bytesToWrite = 4, outputBuffer = 0349540, bytesToRead = 4, bytesRead = 0344E460WPD: 5688.336 0843 0 [wpdsp.dll] ERROR: CWPDDevice:eviceIoControl, DeviceIoControl failed
Message Edited by winterminute on 02-08-2006 07:25 AM

1st Generation iPod Touch No Longer Recognized by Windows 7 PC

I have a 1st generation iPod Touch (no camera) that can no longer connect to my Windows 7 pc. Plugging in the iPod via USB does not trigger any sort of dialog box in Windows and it doesn't trigger a message saying a device has been connected; the iPod does not show up in either iTunes, Computer, Device Manager or Devices and Printers, either as an Apple mobile device or an unrecognized device, and does not charge when connected to USB (though the wall-charger still works). As far as my computer is concerned this iPod does not exist. I had successfully synced this iPod as recently as one week ago and am ready to pitch the thing in the garbage if I can't find a solution.
I have the latest version of iTunes as well as the most up-to-date Windows updates. I have already followed all the steps listed here (iOS: Device not recognized in iTunes for Windows) multiple times with no success.
I also have tried following the instructions listed here (Re: For those Windows users who suddenly cannot see their device in iTunes. Here's a solution that has worked.) but this also hasn't worked since the iPod isn't recognized in the Device Manager and I am not given the option of updating the drivers, manually or otherwise.
I have uninstalled/re-installed iTunes and all related Apple services multiple times. The Apple Mobile Device Service is functioning normally. iTunes diagnostics indicate that there is no device connected no matter what I do. I have reinstalled my Windows USB drivers and changed the settings on the USB Root Hub in the Windows Device Manager to disable power saving options.
I have tried connecting the device to another PC which detects and syncs another apple device (iPhone 5) with no issues, and had the exact same result: the computer doesn't even recognize an iPod is connected.
I can't update the Apple Mobile Device Drivers because the device is not recognized by my machine in any way.
I even completely reset my iPod and that just left me with a unactivated iPod that still isn't detected.
I am really unbelievably fed-up with the useless "try checking your USB cable"-style advice that people seem to offer on this forum. If anybody has dealt with this issue and has any serious advice other than "re-install iTunes," it would be much appreciated.

You said "I am really unbelievably fed-up with the useless "try checking your USB cable"-style"
- Did you try another cable?
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
Try on another computer

I need help, my ipod touch is not recognized by windows as a harddisk

i need help, my ipod touch is not recognized by windows like a memory card or a harddisk.
i would like to transfer the files from pc to my ipod touch without useing itunes.
as i see theres some people here that theires ipod touch are recongnzed as a digitl camra, mine is reconzied as nothing, some help plz.
Message was edited by: B0Om

B0Om wrote:
ok but i still dont understed, only my itnes recongnize my ipod, when i go to " my cumputer, it dosent show up there, not even as a digital camra
Your Touch is working correctly. Currently, without unsupported third party hacks, the Touch has NO disc mode. It will only show up in iTunes.
how do i put programes and games in my ipod touch
Right now, you don't. The SDK is scheduled to be released in Feburary. Then developers will be able to write programs that will be loadable.

IPod touch is not recognized by Windows (with a connect to iTune screen) after OS 5.1.1 upgrade and received an 1602 error

My iPod touch is not recognized by Windows 7 and will not appear on My Computer as a storage device after OS 5.1.1 upgrade and received an 1602 error. My iPod is now having a connect to iTune screen.

Error 1600, 1601, 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
http://support.apple.com/kb/TS3694#error1602

Ipod Touch is'nt recognized in Windows or Itunes

Hello, my Problem is that my Ipod Touch isn't Recognized in Windows or Itunes on my PC, on a Friends PC it works fine, so u guess the Ipod is ok..
1. I tried everything Restarted Apple Mobile Device Service and reinstalled
2. Reinstalled Itunes
3. Reinstalled Windows
4. Other USB Ports
5. Recovery Mode (In Recovery Mode the Ipod is recognized but can't Restore because bevore it Restores completly it gets automaticly disconnected and does'nt connect again)
I Restored my Ipod at the PC from my Friend, but it still doesn't work here.
The USB Ports also can't be the Problem, since all other USB Devices work fine. And the Ipod Touch worked fine as well till a few Days ago.
Every Help is appreciated.

Hi,
What's the make and model of the PC? Is it a desktop or laptop PC?
Make sure the iPod touch is directly connected to a high-speed USB2 port on the PC. The tips in this article: http://support.apple.com/kb/TS1286 will help rule out USB connection issues.
What security software is running on the PC?
If you haven't already, try to reconfigure, update, or uninstall the security software, as suggested here: http://support.apple.com/kb/TS3125.
Also, this article: http://support.apple.com/kb/HT1852 provides general tips that will resolve most issues that prevent the iPhone from being recognized by iTunes.
-Jason

Iphone 4 not recognized by windows xp pro

My new iphone4 is not recognized by windows xp pro. Please help.

See http://support.apple.com/kb/TS1538.

HT1338 cinema Display 30" no longer recognized by my mac pro? What can I do? It worked fine until now.

Cinema display 30" no longer recognized by my mac pro. Until now it worked without problems, then after a crash it fails to recognize the display.
Now it runs in a far lower resolution. What can I do?
I tried to get da driver for it, but could not find any.

Try the other DVI port on the graphics card. On early Mac Pros, only one port is the dual-link DVI needed for full resolution on the 30" display. Make sure the display's USB cable is plugged into the computer.

Ipod touch no longer recognized by itunes

All my apple products, iphones, ipad work and are recognized by itunes but with updates the ipod touch is no longer recognized. Followed what instructions I could get through apple but still cannot resolve problem

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

Ipod Touch 4G not recognized on Windows

Hello to everyone!
I have an ipod touch 4G 32GB, suddenly my windows cannot recognised my ipod. The problem started when my ipod battery is drained. I tried to charge it using my car charger but didnt charge as it should like before. So when i reach home I plugit it to my wall charger and it wakes my ipod, but i noticed one thing while it was plug, the battery charging indicator is not showing on the battery icon as it was before. I keep it plug but the charging time is very long and it did not fully charge the battery. I tried to drained the battery again and plugit in to the wall charger but still the same the charging time take very long and it wont fully charge the fully. I drained again the battery and tried to charge the ipod on shut off mode, i keep it like that for atleast 8hrs and the battery is fully charged as it show on the battery indicator.
When i tried connect my ipod on my computer, windows shows that USB Device Not Recognized. I followed the instruction on how to update the driver on my windows but still my computer cannot install the Driver. I'm recieving this message when i tried to update the driver.
"Windows encountered a problem installing the driver software for your device"
Windows found driver software for your device but encountered and error attemptig to install it.
Apple Ipod USB Driver
This device cannot.(Code10)
I tried to connect my ipod to other computers but the same error message that i'm recieving. I tried replacing my usb cable but its the same cannot recognized my ipod.
The strange things is that my ipod still work normally, just have this issue of connecting to my computer and charging.
Please help
Regards,
Gerald

Hi, thank you for the reply. I tried this solutuion but still didn't fix the problem. I tried installing a new itunes on other laptop but didn't work. When i tried to connect on recorvery mode, the ipod screen show only the cable with arrow to the itunes and stock from there, and on the computer its pop up the message that it didnt reconized my usb device.
I tried also rest all the setting on my ipod but didnt solve the problem.
Is there any way i can restore my ipod on the factory default without connecting to the itunes?
Thanks and regards
Gerald

My 4 generation I touch is not recognized by windows 7 on any computer

My itouch is not recognized by windows 7 on any computer. Please help me. Thank you Gail

Hi Gail,
Have a look here...
Device Not Recognised
http://support.apple.com/kb/TS1538
And Here
iPhone, iPad, or iPod touch not appearing in iTunes

Using my USB, my ipod touch is not recognized in windows vista or i tunes. It wont even charge. If I connect it to windows xp, it immediately charges up and it recognized. Any help would be appreciated.

Using my USB, my ipod touch 2 is not recognized in Windows Vista or i tunes. If I connect it to my wifes Xp, ( where it was before) , it still charges up ( i tunes has been uninstalled. Any help would be appreciated. I have reinstalled itunes.

http://support.apple.com/kb/TS1538
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.

USB devices all of a sudden no longer recognized in windows 7

Hi,
I am using a HP Pavilion Simline s5550nl edition with windows 7 home premium (64-bit) since 1.5 years. Never had any problems until 3 days ago. Since 3 days suddenly some new devices, already plugged-in devices and previously used devices are no longer recognized (USB-device not recognized-error after plug-in).
I used an USB-mouse, USB-keyboard, Smartcard-reader, Sony Story 1.5TB External HDD, USB WebCam. They al worked fine.
3 Days ago I bought a WD Elements 2 TB External HDD. After plugging in, it was not recognized at first. Replugging it in it was recognized, but trying to open the drive in Explorer, it gave a not-formatted-error (while the disk should have been pre-formatted for Windows 7). However, i tried to format the disk, but it could not reach it any more. After rebooting the system the WD elements HDD gave the USB-device-not-recognized-error, using all other USB-ports didn't change that. In fact my Sony External HDD was no longer reachable either. Unplugging and replugging it in gave the same USB-device-not-recognized-error. Trying previously flawless working USB-devices all gave the same USB-device-not-recognized-errors (USB-flash disk 4GB, External HDD 2.5inch 160GB, USB-/card reader HUB, iPhone).
I then tried to connect my Sony and WD external HDD on my other computer with windows XP SP3. They were recognized within seconds and working fine (also the WD elements External HDD indeed turned out to be pre-formatted).
Strangely enough my USB-mouse, USB-keyboard and smartcard-reader kept being recognized at plug-in. Furthermore, my printers (connected over LAN) and NAS (connected over LAN) were usable without any problem. I did not encounter any other problems in functionality of windows. I then thought it might be a corrupted general USB-driver for mass-storage or something, so I started to google this problem. Things I have done so far (before each step I unplugged all USB-devices, rebooted and reconnected the devices):
- Turning computer off, unplug power-cable for 2 minutes, reboot.
- Updating BIOS to version 6.04 (was running version 6.02).
- Uninstalling all USB-devices/mainhubs etc in devicemanagement, automatic reinstallation at restart.
- Try installing newer USB-drivers for mainhubs, messages the installed drivers are already the latest.
- Uninstalling all 'hidden' USB-devices.
- Trying to go back to configuration of 1 day ago (maximum i could go back), resulted in an error that the file might be corrupted.
- Turning computer off, unplug power-cable overnight, reboot.
- Running HP-systemdiagnostics: all passed.
- Running Norman anti-virus scan (latest update): no infection.
- Again uninstalling all USB-devices/mainhubs etc, automatic reinstallation at restart.
I also noticed that during the night before this malfunction appeared (so actually several hours), on january 20th, an automated microsoft critical update was installed (some anti-spyware definition update). I am now thinking it might still be a driver-problem of some sort of general USB-mass storage driver or due to this microsoft update or maybe some clever virus.
I no ordered a Recovery disk (never had to use one, so did not jet own one), to recover windows and if that doesn't help reinstall it. However I hope that anyone can bring up a solution that I am overlooking?
D. Berks

OK, meanwhile I found that only uninstalling the USB2-driver enables the USB-ports again. Uninstalling it makes al devices recognizable, whil reintsalling it immediately makes all USB-devices unrecognizable.
I tried updating the driver to the latest version, deleting it (after reboot an automated reinstall is triggered), but nothing helps. As if soething that stays in the system makes USB2 to corrupt USB-channeling or something.
I strongly believe that it has something to do with the windows-update, but I can nowhere as a question about it to microsoft (will cost 70 euro's!).
Does anybody knows what this could be? Or better: knows of a solution?
Tanks,
D. Berks

WRT54GS No Longer Recognized by Windows

My WRT54GS is no longer detectable by Windows. I've tried everything I can think of. Nothing works. The only lights that flash are Ethernet 3, 4, and Internet. They flash randomly. The Power light, WLAN, and Ethernet 1 and 2 no longer light up. I've reset the router several times and still nothing.

ive had the same problem before.
I had reset it, tripple checked all settings. in the end i down powered my broadband modem then into the router,
then on "Administration"
then "Factory defaults"
then ticked box to yes to reset
then onto save settings
after that down powered everything inc PC and then powered everything back up, set up router again and then it worked ok then.

Ipod touch doesnt get recognized by windows or itunes?

okay so just recently i would plug in my ipod touch and the little noise windows makes to say that something has been plugged in rings except itunes wont recognize it or windows will make it seem like its not even there like its plugged in but a ghost HELP PLEASE!

This may not be your problem but I though it might be worth mentioning. I was having the same problem until I realized I had bought a second usb cable since a family member was always borrowing mine. I spent several days going crazy because my ipod touch was unable to sync with my PC. I finally swapped the new cable for the old and things worked fine.
I discovered that the new cable was only for recharging the battery and not syncing!!! It was only upon looking at the cable packaging that it said in fine print - for charging only!!!
I have no idea why they don't state that more clearly on the outer packaging.
Good luck!

I-touch no longer recognized by Windows XP Pro

Similar Messages

Maybe you are looking for