I transfer my ADF application then don't work any thing !!!?????

Hi everybody,
I have an ADF application. it was OK But when I copy my application to another system and run via it's JDeveloper, nothing work correctly, without any error messages !?. I mean navigation button in form don't work , tree is not shown, some tables don't correctly render ... .
I think when an application is run and deployed in JDeveloper, it create a folder in "...\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs" path contain deployed files that there is not in other systems and also there is some files in Temp folder in windows that is related to my application so I think because of these files my application don't work correctly in other system!! I don't access to my system and my original application so what should I do ???
I use JDeveloper 11.1.1.0.0.
please help me.
with my best regards.

What exactly do you mean by 'copy'? Did you copy the workspace from pc a to pc b?
Did you recolpile the app on pc b?
Did you check if all connections (DB) are reachable?
Timo

Similar Messages

Recently purchased Mountain Lion and now 40% of my Big Fish games don't work, any ideas?

Recently purchased Mountain Lion and now several of my Big Fish games don't work, any ideas?
Mystery Case Files Return to Ravenhurst and MCF 13th Skull to name a couple
I have contacted Big Fish games and tried all the suggestion still to no avail.....

If you "recently purchased Mavericks" without upgraded your hardware (MBP), then your MBP is still capable of running whichever flavor of OS X that you previously were able to run these 40% of Big Fish games.
In that case, partition your hard drive or add an external drive and install that flavor of OS X (Snow Leopard or Lion) there and "dual-boot" your MBP into the alternative OS X when you want to play those games using Startup Manager in the System Preferences before Restart.

Games don't work any longer

I have several games, some free and some purchased, that I have played quite a bit, but now they don't work. When I open them, they act like they are loading, but them I kicked out. This happens at different points during the load process. It has now happened to 3 or 4 different games. Does anyone have any idea why this happens or how to fix it?

Hey there,
One of the files may have become corrupted over time. One solution is to remove the games from your iPod altogether and then resync them to your iPod. If that doesn't work, restoring your iPod may be a good idea at some point as well. Just keep in mind, that restoring an iPod will erase all the music and files from the iPod so make sure they are backed up on your computer somewhere. Hope this helps.
Here is more information on troubleshooting games for your iPod.
http://support.apple.com/kb/HT1563
B-rock

HT4623 I recently updated my 64 gig 4S to OS7, my apps don't work any more, the apps store won't work, I've tried deleting apps and reinstalling, no good. The phone is just a phone now

since updating my apps don't work anymore, the app store won't connect, I tried deleting apps and reinstalling, no go. The phone is just a phone now.

Try accessing the Store through the Music App first then use the other app.
You've already tried a Reset, Restore from Backup, Restore as New?

After uninstalling Google Chrome links in e-mail don't work any more

I have Firefox on my computer. I wanted to try out Chrome. After uninstalling Chrome and reinstating Firefox as my default browser, several things don't work properly, especially links in emails. I tried suggested solution of changing registry key for .html from ChromeHTML to htmlfile or FirefoxHTML but neither works. I just want to be able to click the link and open up the relevant web page.

As someone else has this problem I reply to my own question. Only uninstallling and reinstalling Firefox cures the problem.

I don,t perches any thing but, i don,t perches any thing but

hi i am farman ali. but i do not perches any thing form itone. why 1$ perching from my account. i am woundering if i dont use my pasword how could it posibel to perches any thing. i will complan to vacat thanks
<Email Edited by Host>

We are fellow users here on these public forums, you're not talking to iTunes Support (and I have no idea who or what 'vacat' is) - it's not a good idea to post personal info such as your email address (unless you like spam email).
Have you added or changed your credit card details on your iTunes account ? If you have then each time that you do so a small temporary store holding charge may be applied to check that the card details are correct and valid and that it's registered to exactly the same name and address as on your iTunes account - it should disappear off your account within a few days or so.
Store holding charge : http://support.apple.com/kb/HT3702
If not then does anything show on your purchase history on your account : http://support.apple.com/kb/HT2727
If not then try contacting iTunes support and see if they can help : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management

Is there any way to delete old bookmarks that don't work any more?

As a longtime Firefox user, I have a lot of bookmarks that are old and do not work any more. Is there as easy way to delete these bookmarks or do I really have to try a bookmark, see that it isn't working and then go back in and delete it?
Thanks for your help!

Try:
* CheckPlaces: https://addons.mozilla.org/firefox/addon/checkplaces/

IPad with a second iTunes library sync: all apps don't work any more...how can I fix the problem?

I was used to sync my iPad (iOs 4.3.5) with my main personal computer (with windows 7 64 bit on it) but after the pc went off I synchronized the iPad to my laptop (windows vista 32 bit) just for searching iOs update...the result was that any apps work anymore!!!!! How can I fix the problem?
Thank you in advance,
Paolo

If it's happening on all the apps that you've downloaded from the App Store, but not the Apple built-in ones, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.
If it's happening on all apps then try closing them all completely and then see if they work when you re-open them : from the home screen (i.e.not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

WEB Application security don't work properly with adf faces

We introduce conventional web security in our java ee application integrating ui as adf faces.
We got problem when we access protected jspx document. It seem the container don't ask the user to log on when the page did not contains any link with the model (page definitions i think). It seem that the container react lately too, after displaying part of the screen.
For example:
We have an application with a home page with two tabs representing our applications.
The home page is an unprotected directory.
The both applications home pages are in protected directories.
The both applications home pages did not contains any link to the model. Some text are displayed in showDetailHeader, panelHeader, etc
Whe we start the application, the home page is displayed. The infoUser part on the panelPage indicate that nobody is authenticated. All is fine.
When we click on the first tab representing the first application, the page is displayed and the containes don't ask to login. The page is into a protected directory. When we click on showDetailHeader, nothing is done, the content still disclosed.
When click on a menu that load a page that reference to the model part (page definitions exists), the container ask to login. After a sucessfully login, all pages are accessible, showDetailHeader work properly, infoUser part is loaded with the username for the authenticated session.
Is this due to a bug ?
Is this due to a bad design or an error in our development ?
Note that we didn't implement since yet the adf security layer may be it will solve this problem.

Hello,
when your security is based on URL, the problem could be the url is changed one click later. Check this: Re: Browser URL and current page

Application variables don't work!

I am using COLDFUSION MX 7.
There are 2 files:
Application.cfc
and
test.cfm
Application.cfc:
==================
<cfcomponent output="no" displayname="test">
<cfset THIS.name="test0">
<cfset application.testvariable="teststring">
</cfcomponent>
==================
Test.cfm
<cfdump var="#application.testvariable#">
RESULT
==================
Element TESTVARIABLE is undefined in APPLICATION.
QUESTION
==================
How do I use application variables?
Note: my Application file is a cfc not a cfm because I'm
trying to use MX 7 (and want to use functions such as onSessionEnd
etc.)
Thanking you in advance,
Mitja Giaconi

QUESTION
==================
How do I use application variables?
Note: my Application file is a cfc not a cfm because I'm
trying to use
MX 7 (and want to use functions such as onSessionEnd etc.)
Good, then you can start by using onApplicationStart which is
the first
event where application variables can be set.
<cffunction name="onApplicationStart" ...>
<cfset application.testvariable="teststring">
</cffunction>
Livedocs information on all things Application.cfc
http://www.adobe.com/livedocs/coldfusion/7/htmldocs/wwhelp/wwhimpl/common/html/wwhelp.htm? context=ColdFusion_Documentation&file=part_cfm.htm

Queues in application made with application builder don't work?

(Labview 2011) I have a medium sized application that runs just fine within the Labview environment. It uses event trapping for most things and passes longer tasks off to a consumer loop using a queue. Having gotten it to run the way I want, I want to use the application builder to turn it into a stand alone exe that can be distributed. It compiles without any errors or warnings and starts up fine. However, anything that happens via a queue doesn't work. The very first thing that should happen within any of the queues is that it should disable and grey out certain buttons to prevent unwanted behaviour. They don't get disabled and greyed out. So it's pretty clear nothing gets started. The queues also all have error handlers and there's no peep from them. Everything that doesn't use a queue works OK. Is there some kind of option in the application builder I need to activate to get the queues to work properly? The consumer loop does use an enum to figure out what it should do. On the off chance that the queue was mistakenly running the default (blank) case, I stuck a message box in there to warn it was being accessed. No message comes up so there is no indication that it is running the queues at all. The program doesn't hang when it should be running a queue. It just doesn't do what it should. ANy help would be greatly appreciated.

rossu wrote:
Thanks for the replies. The answer is a bit bizarre, but might be useful to know. Apparently, in some of the cases in the event structure (producer loop), the Boolean value that gets wired to the stop control in the surrounding while loop was missing. In the Labview environment,this didn't cause a problem (default value?), but in the application it did. Making sure they were all fixed made the issue go away. Interestingly, which events were missing the Boolean and what didn't function were not correlated. The program never got hung in the event loop I.e. the interface didn't freeze.
This does not make any sense either. There should be no difference between development and build. Most of my output tunnels of event structures are only wired in the non-default situations. I suspect there was maybe some corruption and changing the tunnels forced a recompile, clearing things up. No way to really tell.
LabVIEW Champion . Do more with less code and in less time .

EMac to iMac - How do I transfer data when USB ports don't work?

I just bought a new iMac to replace my old eMac and I need to transfer the data from the eMac to the iMac - here's the problem - the USB ports on the eMac aren't working, the devices work fine like keyboard & mouse but the USB ports are dead. I can't hold down any keys as it starts up to make it a fire wire device etc. So how can I do this??
Thanks in advance for any help.

Here's Apples quick assist.
I also have this USB faq.
 Cheers! DALE

ADF AttributeBinding.setInputValue() don't work

I want to modify the value of bindings.someInput.inputValue from the Backing Bean commandButton1_action() method. I did something like this:
public String commandButton1_action(){
// using EL
FacesContext fc = FacesContent.getCurrentInstance();
fc.getApplication().createValueBinding("#{bindings.someInput.inputValue}").setValue(fc, stringValue);
OR
public String commandButton1_action(){
// using bindings
List attrs = bindings.getAttributeBindings();
for (Iterator i = attrs.iterator(); i.hasNext(); ){
AttributeBinding attr = (AttributeBinding) attrs.next();
if ("someInput".equals(attr.getName())){
attr.setInputValue(stringValue);
break;
Both ways failed to set the binding attribute's value.
How to do this actually?

Hi,
I think the safest wa is to set the value on the Iterator binding as follows
FacesContext fc = FacesContext.getCurrentInstance();
ValueBinding vb = fc.getApplication().createValueBinding("#{bindings}");
BindingContainer bc = (BindingContainer) vb.getValue(fc);
((DCIteratorBinding) bc.get("DepartmentsView1Iterator")).getCurrentRow().setAttribute("DepartmentName","Sales II");
Frank

MicroSD don't work any more in my Windows PC

Hi,
I want to know if somebody has the same problem than I have with a N series phone;
I just buyed a 1 GB microSD with miniSD and SD adapter from Sandisk for my N73.
The first time, a put it in my Windows PC, I can read it, copy a lot of file in there (pdfs mainly) and then put the microSD card inside the miniSD adapter an then into the phone ...
Everything works fine !
The second time, when I tried to put the microSD in the PC to copy more files, it doesn't work !!!!!!
The microSD doesn't work in my PC. Windows even not recognize that there is a SD card in the slot, the microSD with the SD adapter.
I already spend a lot of time trying to resolve the problem, I already update drivers in the PC, I made a lot of test and this is the result:
When I put a diferent SD card in the PC, for example, from an camera, it works fine, the SD PC reader can read the SD card, but not the may from the N73.
There is only one error message that I have from Windows XP: There is no media in the Removable Drive (SD3 Device)
The funny thing is that the original Nokia miniSD and the new microSD with miniSD adapter works fine in the N73.
Some body has any idea to resolve this ?
There is some kind of incompatibility between the Windows XP and Symbian OS?
or
Symbiam OS put some mark on the device that Windows can read ?
I need to transfer a lot of files and exchange the mobile cards through the day and is easer to copy them in Windows Explorer in my PC desktop.
Thanks a lot for any help.
Regards,
PE
Message Edited by gtpe on 21-Jan-2008 05:20 AM

Hey, I saw your post and I am experiencing the same issue. I downloaded iOS 7 on Sunday and everything was fine until yesterday when the lock soinds dissapeared. I also noticed that when using headphones the sound is not nearly as loud as it was before the 'upgrade'. I have tried the reboot several times and the issues persist. Before the upgrade the lock sounds would sometimes go out but a restart would clear the problem. Hope you have better luck than I have on finding a solution.

HT204053 I tried to download some music to my new computer, when I tried, it said that the apple id was used before on 5 other computers. The computers it was used don't work any more. What do I do ? I don't want to lose all the music I purchased.

I want to know how to remove other computers from i tunes that are no longer working.

Hello DJSmithLaner,
Thank you for the question. It sounds like you have authorized five computers, but you no longer have access to all five computers.
You can deauthorize all the computers associated with your Apple ID and then authorize the computers you still use.
Use these steps to deauthorize all computers associated with your Apple ID:
Deauthorize all computers
After you authorize two computers, you'll have the option to deauthorize all computers for your Apple ID. You can deauthorize all computers once a year. You should deauthorize all your computers in these cases:
If a computer doesn't work anymore
If you don't have one of your computers
If you used 5 authorizations and want to authorize a new computer
To deauthorize all your computers, follow these steps:
Click to open your account in iTunes (you may need to sign in with your Apple ID), or follow these steps:
Open iTunes and click iTunes Store.
Click Sign In and enter your Apple ID.
Click your Apple ID and select Account.
Click Deauthorize All.
The Deauthorize All button appears only if you have more than two authorized computers.
Once you have deauthorized all the computers, use these steps to authorize the computers you have access to:
To authorize a computer, follow these steps:
Open iTunes.
Choose Store > Authorize This Computer from the menu bar.
You may need to show the menu bar to see this option in Windows. In earlier versions of iTunes, you can access this option from the Advanced menu.
Enter your Apple ID and click Authorize.
You can find those steps and more information at the following link:
iTunes Store: Authorize or deauthorize your Mac or PC
http://support.apple.com/kb/ht1420
Thank you for using Apple Support Communities.
Best,
Sheila M.

I transfer my ADF application then don't work any thing !!!?????

Similar Messages

Maybe you are looking for