I transfered all my G5 files onto a drive and am now trying to transfer to my new Mac Mini.  I've selected my source as "another disc" but my drive (a rugged 500GB drive) isn't being recognized. Any tips?

I transfered all my G5 files onto a drive and am now trying to transfer to my new Mac Mini.  I've selected my source as "another disc" but my drive (a rugged 500GB drive) isn't being recognized. Any tips?

Impossible to answer with information provided.
Allan

Similar Messages

  • I have three apple is accounts. one i set up for my daughter and I am trying delete it, but we can't because the password isn't being recognized. how do i delete my daughtyersd account with out knowing her password?

    i have three apple aqccounts and want tp delete one. how do i do this w/o knowing the password (my daughters)?

    Hi, Fugalltadowivu.  
    Thank you for visiting Apple Support Communities.
    This sounds like Activation Lock has been enabled on this device.  Here is some helpful information regarding this feature.
    Find My iPhone Activation Lock
    http://support.apple.com/en-us/HT201365
    If you purchased your device from a third party, this device may be locked to their Apple ID.  If this is the case you may want to check out the article below.
    Find My iPhone Activation Lock: Removing a device from a previous owner’s account
    http://support.apple.com/en-us/HT201441
    Cheers,
    Jason H.

  • I recently purchased music on my iPhone (4) and am now trying to transfer those purchases onto my computer. However, when I try to play the music it says my computer isn't authorized to play it. I have already authorized this computer, what do I do?

    I tried unauthorizing then reauthorizing it but the same thing happened.

    Oh, and I'm not sure how relevant or necessary this information is, but the iTunes store on my computer doesn't work either, which led me to buy the music on my phone. I try to open it and the top says "Accessing iTunes Store..." and never gets past like a little bit less than half. I looked at some other discussions but none of the suggested solutions worked.

  • Can the new Mac Mini boot Snow Leopard from an external hard drive?

    I currently boot my 2009 Mac Mini from a FW800 external drive with 10.6.8. If I just plug my external drive into a new 2011 Mac Mini, will it boot into Snow Leopard if I set it as the startup disk or will I get a kernel panic?

    I bought a 2011 Mac Mini, which came with Lion installed. I thought maybe I could repartition it and have a Snow Leopard partition. So I repartitioned it (500gb split into two 250gb partitions). I named the new partition "SnowLeopard" just to make it easy for me to tell the difference.
    I attached the external DVD and put in a Snow Leopard installer disc, holding down the C key so it would boot and install from that, but it just spun for awhile. Doesn't appear to work.
    Then I read somewhere else that someone had managed to clone a copy of Snow Leopard onto an external drive and boot from that. In their situation they were talking about a MacBook, but the principle seemed sane.
    So I rebooted, holding down the T key to put the Mac Mini into Target hard disk mode, and attached it via Firewire to another MacMini (circa 2008 or so, not sure of year, but it was upgraded last year to Snow Leopard and has been upgraded along and along). Then I used Carbon Copy Cloner to copy Snow Leopard (that is, the entire hard disk-- System and all applications and data) to my newer Mac Mini's "snow leopard" partition.
    For yucks, when it was done cloning, I restarted the older Mac Mini, and had it boot from the newer Mac Mini's snow leopard partition--- it worked! To make it easy to tell the difference, I changed the desktop background to something completely different. I think I tried booting from Lion but I can't remember if that worked.
    Then I rebooted the newer Mac Mini, which booted up in Lion, of course. Going into System Settings, I changed the startup disk to the "snow leopard" partition, and rebooted, and it booted up in Snow Leopard.
    I have yet to test the applications on the Snow Leopard partition. Another problem has arisen.
    Because with both of the Mac MInis being active on the network, they both had the same computer and user name. So I renamed the newer Mac Mini to something completely different, and changed the password.
    Unfortunately, now I cannot change any other setting in the System Settings that requires a password. While the newer Snow Leopard lets me log in with the new user and new password, whenever I try to click the "lock" icon to change something, I'm prompted for a username and password. Apparently this is some different username and password than either the new or old username/password.
    I've tried various combinations of both: new user/old password, old user/new password, old user/old password, etc.
    So if you do what I've done, be careful about changing the username and password on your cloned computer. I think it may be wiser to create a new user and then delete the old cloned users. I may just have to re-clone the old Mac Mini to the new one again.
    If anyone has any ideas about this password conundrum, please pass along!

  • All of the sudden my iPad (1st generation) isn't being recognized by

    All of the sudden my iPad isn't being recognized by any of my PC's.  The PC's are working fine (they are still recognizing our iPhones)  and I'm pretty sure that the problem is with my iPad.  Please help!!!

    Having the same issue.
    iPad 1 updated to 5.0.1 was working fine. Suddenly will not recognize when it has a USB cable plugged into it. Almost as though the cable isn't even plugged in. I left it plugged in all day and it's charge increased by about only 5%
    Tried different comptuers and the external power supply - same results. The iPad doesn't even recognize the cable is plugged in.. no lightning bolt symbol or anything.

  • My internal hard drive isn't being recognized on my macbook pro but when I put the HD in my Mac Pro (desktop), the desktop computer recognizes the HD.  When I insert the installer CD on my laptop, it also doesn't recognize my hard drive. Please help!

    My internal hard drive isn't being recognized on my macbook pro but when I put the HD in my Mac Pro (desktop), the desktop computer recognizes the HD.  When I insert the installer CD on my laptop, it also doesn't recognize my hard drive. Please help! Thank you!
    I've also been getting an image with the folder and question mark. I've tried everything on the apple support page but it doesn't seem to work either.

    Well, I tried all of your suggestions and they didn't work -- no surprise because I was trying to backup to my external c.d. disk.  Duh!  The application for the home is in the mail.

  • I have recently purchased an iMac from the Apple store. I previously had a windows computer and I transferred all my important files and music from the old computer onto an external hard drive. I've plugged the hard drive in and I can't seem to locate it!

    Hi everyone,
    Before I set up my new iMac, I transferred all my important files from my old windows computer (pictures, documents, iTunes etc) onto an external hard drive. I had no trouble using and locating my hard drive on my old computer, however I'm having great difficulty finding it on my iMac. The external hard drive is plugged in with all wires connected and correct. I've tried all the USB ports and I still can't locate it!
    I just want to transfer everything from my hard drive to the iMac!
    If anyone could help me locate and guide me through the process of using an external hard drive on an iMac, then that would be brilliant!

    Try using Migration Assistant following this guide:
    http://support.apple.com/kb/HT4413#3
    There is advice in this document for using Migration Assistant from Time Machine or other hard drive.

  • My Ipad 3rd Gen isn't being recognized by my computer...

    My Ipad 3rd Gen isn't being recognized by my computer / (doesn't show up in itunes)...
    I have tried to use it with the following:
    Windows 8 64
    Windows 7 64
    Windows 7 32
    Mac OS (newest)
    All tried with Itunes 10.7.
    I bought it about 3 weeks ago and activated it through WiFi.
    It has never been recognized on any computer I have tired it with.
    I also tried to connect in DFU mode(didnt work)
    Do I have a defective Ipad?

    make sure you have itunes installed on that computer. itunes comes with the essential ios drivers which are needed in order for your computer to recognize your iphone.

  • My ipod touch isn't being recognized by itunes ?

    So my ipod wasn't being recognized by itunes so i sent it away to apple to be fixed and they sent me a brand new one but this one isn't being recognized by itunes eitheir? I've uninstalled and re-installed itunes plenty of times, my lead is perfect and its really annoying me i have no music or anything on it? Help please:o

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • HT201269 My iPhone 5 isn't being recognized by my laptop anymore?

    My iPhone 5 isn't being recognized by my laptop since I upgraded from the 4S.  Any ideas?

    Read http://support.apple.com/kb/TS1591

  • Firewire 800 port on new MBP not mounting Lacie rugged 500GB drive

    Hi all
    I've just purchased the new MBP 17" and my Lacie Rugged 500GB drive will not mount.
    It will mount over USB though.
    I've tried three different FW800 cables and no result.
    There are some posts around 10.5.7 update issues, but I've tried everything listed and no dice.
    Any help would be appreciated.

    I had a Western Digital My Passport Studio model like that. It has nothing to do with cables or your laptop. It has to do with manufacturers who fail to adhere to the proper power standards for the interface. Basically, if the drive demands more power then the port will give, it is never going to work.
    I returned my WD to Apple for a refund, and instead tried a SeaGate FreeAgent Go firewire 800 drive. It has worked flawlessly over Firewire on my MacBook Pro, and it even came with both a Fire 800 cable, a firewire 800-to-400 cable, a USB cable, and a special USB power cable so you could draw additional power off the USB ports if a firewire 800 port wasn't putting out sufficient power. That's why I bought it - figured one way or another it had to be able to work on bus power (even if it had taken both the firewire and USB bus in combo to do it).
    Another option I've had good luck with in the past is OWC Mercury on the Go drives (eshop.macsales.com). These have always worked fine on bus power for me, but they also have an optional external power supply too, just in case.

  • My iPod touch isn't being recognized by my pc. The lock button on it won't work due to water damage, and a friend of mine fixed the problem by restoring it on his computer. How do I restore it without the lock button?

    My iPod touch isn't being recognized by my pc. The lock button on it won't work due to water damage, and a friend of mine fixed the problem by restoring it on his computer. How do I restore it without the lock button?

    first try:
    iOS: Device not recognized in iTunes for Windows
    next
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • TS1538 my ipod touch 4g isn't being recognized by the computer nor Itunes.

    My ipod touch 4g isn't being recognized by the computer nor itunes. I didn't charge my ipod for about a week and then I bought a new usb cord and since then my ipod won't be recongnized. I've tried everything and nothing seems to work. My ipod still charges on the computer. Please help!!!!

    Did you try everything here:
    iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    Next try another computer.

  • My iPhone 3GS isn't being recognized by iTunes.

    My iPhone 3GS isn't being recognized by iTunes. When I plug it in, it just says "capacity: n/a. software version: n/ a. serial number: n/a"

    http://support.apple.com/kb/TS1538

  • I tried transferring my iphoto library from my old macbook onto my new macbook pro (via external hard drive), but when i open the new iphoto, it seems to have transferred ALL images ever used on my old macbook. so i tried to just del

    i tried transferring my iphoto library from my old macbook onto my new macbook pro (via external hard drive), but when i open the new iphoto, it seems to have transferred ALL images ever used on my old macbook. so i tried to just delete all those images so i could try a different approach to transferring, but the new iphoto won't let me do anything and every time i try to delete anything it crashes (since the image amount is so high).  please help!!
    MacBook Pro, OS X Mountain Lion (10.8.2), iphoto '11, version 9.4.2

    To move an iPhoto Library to a new machine:
    Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
    But however you do choose to link the two machines...
    Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
    Then launch iPhoto. That's it.
    This moves photos, events, albums, books, keywords, slideshows and everything else.

Maybe you are looking for

  • Can't open iPhoto after copying to external disk

    After i had made a copy to the external disk, i can launch the iphoto.  Everytime, i clicked on iphoto library, it showed 'Angs-MacBook-Air:iPhoto Library_old.photolibrar hooitang$' in terminal.  Also, when i click iphote in dock, it showed ' You can

  • After download Itunes 11.0.1 can not open store but Apps update is good.

    I downloaded new Itunes 11.0.1. Music, Films, apps are all on screen. I can also update my Apps from the appstore. But when I want to go tot the Apple Store for aan new app or new music it says: ITunes doesn't work, waiting for a sollution. When I do

  • Data uploading techniques//LSMW

    Dear Experts, As i am very new to SAP HCM. Can any one explain about data uploading techniques in HCM point of view. ANd what is BDC,PDC Thanks in Advance Ram

  • Messages that I moved to On My Mac Mailboxes do not display.

    The title of the email is there but when I click it, it is blank.  Happens only in some mailboxes- other mailboxes display the messages.How can I get the message to display in these mailboxes?

  • BT's usage monitor faulty?

    Bearing in mind the many posters on these forums who have incredulously protested at being told they have exceeded their usage limit I am not surprised to read on this thread I have had my connection professioanlly monitored for some months now whils