I transfered data from my old Mac, but now it tells me "No Access" when I try to open the files. How can I fix that?
I transfered data from my old Mac, but now it tells me "No Access" when I try to open the files. How can I fix that?
That's the problem, then. The files are under your 'old' user account. You should be able to access them if you log into your old account. However, that's not going to let you move them to your new user account. It's for situations like this that I always create a root user account (although I seldom access it). With a root user account, you can copy files from one user account to another. Note that someone may come up with a better idea than what I would use, but here goes.
Read http://support.apple.com/kb/ht1528 and set up a root user. Then you can transfer files from one account to another. If you like, you can delete this account after you've moved your files.
Good luck,
Clinton
Similar Messages
-
I have recently transferred data from my old Mac to my new one. The result was good, but I have 2 users now, whose data I want to merge into 1 single user, so to avoid having to switch from one user to the other to view and use certain files. How to do it?
Here's an easy way:
Pick the user that you want to eliminate (making sure that the remaining user has administrator privileges) and move all of the data that you want to keep into the Shared folder. Reboot or log out and login to the user you want to keep. Copy all the data from the Shared folder into your account - placing it neatly in folders (Documents, Music, Movies, etc.).
Once the data is moved, log into the account you want to delete just once more to make certain that you've grabbed all the data you want to keep. Log out and log back into your admin account and go to System Preferences>Users & Groups and delete the 'old' user.
That should do it.
Clinton -
I was transferring data from my old iMac to my new iMac via Time Machine. After about 4 hours, the electrical power fluctuated and turned off my wi-fi. Now most of my necessary programs are useless. How do I erase that mess and start over?
Hello there, LynnS.
The following Knowledge Base article and it's referenced link should get you started with the Erase and Install of Mavericks:
OS X Mavericks: Erase and reinstall OS X
http://support.apple.com/kb/PH14243
Once you've gone through those 2 articles, this article should help you with restoring from your Time Machine Backup:
OS X Mavericks: Recover your entire system
http://support.apple.com/kb/PH14185
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
when I got my new macbook air, apple downloaded my photos on my new laptop from my old laptop, but now i have duplicates photos because when I started icloud, I got duplicates. How can I delete duplicate photos?
HI ..
On the new MBAir, open System Preferences > iCloud
Deselect the box next to Photo Stream then reselect it then restart your Mac. -
I can't read acsm files on my e-reader after transferring them from the pc with ADE. it seems to work, but then when I try to open the files on the e-reader it says "open failure". what's wrong?
The acsm file is not the book, it is a ticket to get the book. I sometimes get library books online, here is what I do.
1. Start ADE on the computer
2. Go to library website and find the book I want to download.
3. Click on the download link
4. In windows 7 a box opens asking whether I want to open( or run) or save the acsm file
5. Click open/run and ADE downloads the book into the "Library"
6. Transfer the book (epub file) to the reader. -
downloaded Appleworks 6.2.9 for Mac Updater-2.sim but when i try to open the file i receive the message "legacy image should be updated". what does this mean and/or entail?
Mavericks is not recognizing the .smi extension - on my Mac it thinks it's a RealPlayer document. You are not going to be able to do anything with this - it requires AppleWorks to be present to be updated, and you can't run AppleWorks on Mavericks (other than by the rather roundabout process of installing Snow Leopard Server in Parallels and installing AppleWorks on that, as described here).
-
I downloaded a trial version of Final Cut Pro X directly from the Apple website but when i try to open the file, a message is displayed saying 'legacy file should be converted' what can I do to fix it?
Where did you download it from exactly? URL.
Exactly what computer is this. -
I updated my itunes to 11 and found out my phone and ipod were not compatible. I uninstalled it and reinstalled 10.7 but now I get an error message when I try to open itunes saying "the file cannot be read because it was created by a newer verison" What do I do?
Thank you for clarify I'm supposed to read the ENTIRE article. I thought I was just supposed to read the title and magically everything will fix itself. I appreciate you taking the time to help me however I do not appreciate the caps and the way you have addressed the situation. If you are not going to kindly help people/make suggestions just don't try! And for the record my conclusions are not illogical, the iOS7 thing is on the website in small font (which I got by reading the ENTIRE thing) and you should really find a new hobby because your socialization skills need some help! That goes for you too Chris. Not everyone is a tech nerd
-
Can I take an older imovie made back in 2009 found on an old external drive and get it to iCloud? When I try to open it, it says can't open because the file was iMovie 9.0.9. I just want to get it on Theater so I can watch on Apple TV and have in iCloud
ERROR (1)
- Place the iPod in DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Try on another computer
- Try another cable
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
The problem is encountered when we try to open the file from external vendor.
We are using Adobe illustrator CS3 with Patch 13.0.2. in MAC PC with OS 10.4.11. We tried to open the file generated from external vendor. This file is made by CS4/CS5 & downgraded to CS3 because we are using different version of CS package.
When we try to open such as file. It takes some time to open it. But after a while, the application illustrator has unexpectedly quit & crash report is generated. Any expert can help to look at the problem.Just a bad file.
No telling what specifically may be the issue without seeing the original file as compaired to the CS3 file. -
Sinve I joined the cloud, i cannot open books I had on my kindle app after downloading. I am getting an error message telling me to delete and re-register my kindle app. I've done that, but am still getting the same message.
Have you asked on the kindle board? since it's their app that's messing up they may have more specific advice.
-
Help!!!???
Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I need to have this flyer prepared by tonight. Please, if anyone can help me get this situated that would be great.
Myke19772 if you wish to evaluate Photoshop CC 2014 to edit your photo then please see Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html for information on how to download and install the software.
If you continue to be prompted for a serial number then I would recommend reviewing Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html. -
problem when I try and open a download. says its not supported on os x. really need help
Sounds like you bought an app for a windows machine.
What's the app and where did you buy it? -
I am not able to download all the album I bought from itune store. The album contains 13 songs but 4 of them would not load up into my ipod. An error code will pop up notified me that "my Ipod cannot convert some of the file" How can I fix that?
Hi there mayway3000,
You may find the troubleshooting steps in the article below helpful.
iPod does not play content purchased from the iTunes Store
http://support.apple.com/kb/TS1510
-Griff W.
Maybe you are looking for
-
How do I change icloud account in my iPhone?
How do I change icloud account in my iPhone?
-
i downloaded alot of apps on my itunes.. and none of them show up on my itouch... and i went to buy the 2.2 version, so i could put apps on and it wont let me... i dont have a credit card number i only have a redemm card? do i need a credit card numb
-
When i import movies from my iPhoto app to my iMovie app does it make a copy (thereby using double the hard disk space) or does it link to my iPhoto app? The reason i ask is i want to archive all my videos from iPhoto/iMovie. Do i need to archive the
-
Master Data Synch - Contact persons
In master data synchronization FSCM for business partner contact person do I have to setup a different bp number range or do they take the same number of the contact person assigned in the customer master? If not is there a way we can configure the B
-
I want to select columns from a table. Also I need one more record '-1' with the result. I should not use oracle specific keywords like rownum,Dual etc.. since we will be using the query with all DB types. create table test(a varchar(10)); Insert int