I tried copying a photo and pasting it in another event/group within iPhoto but the paste feature doesn't work. This wasn't an issue with both Leopard and Snow Leopard. Do you have any solutions or tips?
I bought a new MacBook Pro with OsX Lion as operating system. I use iPhoto a lot and when I tried copying a photo then pasting it to another event/group, the 'paste' feature doesn't work. This wasn't the case with Leopard and Snow Leopard where the 'paste' feature worked. What I did was to paste the photo first to the desktop before transferring it to the new event/group. I brought my Mac to the Apple store where I bought it and the technicians were themselves surprised that the 'paste' feature didn't work. Chalked it up to glitches in the Lion os. So how do we fix this? I just find it absurd that a feature that used to work in Snow Leopard has been disabled in Lion, and the user still has to undergo an additional step to make it work, when new technology is supposed to make things easier for users.
Also, hasn't anyone noticed that it takes longer for the computer to boot upon opening?
Instead of copy and paste drag the photo to the new event. Or flag it and use the add flagged photos to selected event command
LN
Similar Messages
-
I bought my iphone 5 in Houston on May 15 2013.
IMEI 013428009645399.The problem I have is that in the country
which I live GREECE the 4G is
not working.Please if you have any solution for this
problem let me know.My email is [email protected]
Thanking you in advance
Philip CouridisiPhones purchased in the US are NOT guaranteed to work with 4G bands outside of North America.
For what crazy reason did you purchase an iPhone in the US if you live in Greece? If your phone needs servicing, it will have to be brought back to the US. You cannot get that phone serviced in Greece. -
Since upgrading to iOS 6 my iPhone now does not connect to my 2013 elantras Bluetooth set up where as with the previous version of iOS it connected seamlessly. Please let me know if you have any solutions. Thanks
Have you checked to see if Elentra has a firmware update since the new iOS release?
-
I have a G5 to sell and want to erase all my data from it, but the cd drive won't work so I can't use the OS10 start up disk. Any way to do it?
Do you have another Mac? If so, you can startup this one in "Target Disk Mode" (instructions here) and connect it to another Mac to delete the home folders (or the entire drive, if that's what you want).
One piece of advise, though: after deleting the data, and of course emptying the Trash, it wouldn't hurt to also securely erase the "free space" of the drive (instructions here) before disconnecting the old Mac from the new one. This can be helpful, since "deleted" data is often retrievable with ease unles it's written over after the deletion. -
Issues with both iChat and AIM
Recently I have been having issues with both iChat and AIM. I was hoping someone here could shed some light on what the problem may be.
AIM allows me to log-in and chat with people. However, if I close an IM window or Buddy Info window, the AIM program will quit and the "Unexpectedly Quit" notice will pop up.
In regards to iChat, I did a clean install of iChat using the Tiger install disk. However, when I launch iChat and go through the initial setup it freezes up and I get the spinning rainbow and have no choice but to do a force quit.
Any ideas as to what the problem may be?Hi
Seeing you re-installed iChat you will need to run the 10.4.10combo http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10410comboupdat eppc.html to bring iChat back upto date.
Tony -
hi i want to take a sequence from one timeline and drop it in another timelien without having to reedit the sequence. how do i do this thanks
leeg
Your new thread was a success.
Our original discussions on transferring content from one Premiere Elements project to another can be found
What am I missing?
in posts 4, 5, 6, and 7 of the above link.
Good choice in deciding to go with the export from project 1 into project 2.
Thanks again for your follow up and good work.
ATR -
I tried to find somewhere that services them but? That's itunes for you, and the ipod, itself? I would never recomend ipods for anyone, because there isn't any place for you to get them fixed, I guess that they are just throw away cameras in the same sence, if it doesn't sharge any more, throw it out I guerss?
What does iTunes have to do with it? And where do you live? Do you have any shops that do repairs on small electronics and/or smartphones?
You can always go here: http://www.iresq.com
Or you can do an out-of-warranty replacement with Apple: https://selfsolve.apple.com/agreementWarrantyDynamic.do -
my iphone 6 plus after updating to IOS 8.2 seems to have a problem with the touch id witch doesn't work neither in home unlock nor in app store and when i'm trying to add a new fingerprint it says ''failed unable to complete touch id setup.Please go back and try again'' . I have multiple fingerprints and none of them appear to work.
Hi Giannis,
If you are having an issue with Touch ID not functioning as expected, I would suggest that you troubleshoot using the steps in this article -
Use Touch ID on iPhone and iPad - Apple Support
Start with the section titled Clean the Touch ID sensor and then Get help with Touch ID.
Thanks for using Apple Support Communities.
Sincerely,
Brett L -
I'm currently using Google reader for my feeds but Google is discontinuing it in July. So I need a new feed reader option. I am trying to set up the Brief add-on as my reader, using Live Bookmarks but when I attempt to subscribe to a feed, the subscribe button doesn't work.
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.'' -
Hi,
i have a 2008 macbook pro, i was using mac os x 10.5, but decided to install mac os x 10.6.8, the 1st disc was installed correctly but the 2nd one
is not working and seems scratched, because i inserted it but the computer was still asking me to insert the disc 2, now i don't know what to do!!!
may i shut down the computer or what?? please, HELP!!!!You can contact Apple Support and request a new set of disks, have your serial number handy, and if possible, they will send them to you for a nominal fee. (usually about $20.00)
800-692-7753 Technical Support.
You can get get your serial number from the back of your machine, or if possible, click on the Apple logo in the menu bar, About this Mac>more info, it should be on the first window that comes up. Many Macs disks are build specific so this is important.
You can GENTLY try polishing out the scratch with a micro fiber cloth, or a very SOFT cloth, moving from the center out, very gently, then rinse and DRY THOROUGHLY,and give it another try, if no joy try the tech support.
Hope this helps -
I would like to know if apple will replace it. If not, then I will take somewhere cheaper but it has some scratches so I would like to get a new one.
The home button doesn't work, the LCD cable is broken and the screen is cracked! Wow. That's the worst case of abuse that I've seen. I think that Apple will laugh at you.
-
We have try to install the plugins in :
usr/lib64/firefox/pluglins;usr/lib/mozilla/pluglins;usr/lib64/mozilla/pluglins;opt/firefox/pugins ...... no way.Sidney L. Brock III wrote:
Chris, I have the same problem and the previous solution is not helping because with "get info / rosetta was never checked".
Flash video from Adobe and ESPN will not play for me. Mac 10.6.8, Safari 5.1, Shockwave Flash 10.3 r183.
I am using Ad Blocker. I have read to uninstall it and try Flash but this was not effective. So any solution would be appreciated.
Sid
Hi Sid,
Where you able to get Ad Blocker removed? If you go to the About Flash Player page, do you see the spinnng red F?
Thanks,
Chris -
I have a 2010 macbook pro running osx 10.6.8 and would like to interface my mac to my HD tv. Are any instructions available to reliably make this connection and if so what is needed on my part. Is the software compatible or do I have to upgrade to a later version OS. Thank You,
GeneI purchased a mini to HDMI cable and tried to connect to the TV but the TV is not recognizing the computer. I attempted to set sound and display settings under the "my Preferences" utility with no success. Again, I'm not sure if I need to upgrade my OS software Any Suggestions?
-
Thanks:) This may sound like a stupid question but i am completely new to apple.
And if you're not sure which plug that is... you can follow the cord from your speakers to your Mac. Although, your question is just vague enough to imply that you may be trying to fix something or that you have heard of a potential problem. Why do you feel you need to disconnect your speakers?
-
I purchased the new Airport base station that allows for a wireless setup of a primary network and a guest network. The primary network installation worked great but I cannot get the guest network to work properly. Any suggestions on how to make it work?
The AirPort base station is designed to connect to a simple modem......not a modem/router or gateway device that is often furnished to users by Internet Service Providers.
So, the first troubleshooting question would be to find out what the make and model of the device that you call your "modem" might be.....to see if you have the right kind of product that will allow the Guest Network to operate correctly.
Maybe you are looking for
-
How to reduce process time in report
Hi all.. Is there any technique to reduce process time in report on programmer side?? Plz help me...
-
Moving I-pod Touch app from one library to another on the same account
I have an i-pod classic my daughter has an i-pod touch. We each have our own i-tunes library (on the same computer) but we share the same apple account. I sometimes download apps for me to use on her i-pod. I inadvertently downloaded an app to my lib
-
Should i open folder and transfer cd file to n200 or whole fold
I used mediasource to rip my cds to computer and ended up in widows explorer with a folder for the cd and inside the folder a file with cd in it.when i ripped using windows media i ended up with just a file with cd in it in explorer. In transfering c
-
I downloaded the PSD trial. Worked in it. Saved my file. Now when I try to open it it says "not a valid photoshop file"
-
Connecting SQL Server 2000 on Network
Hi, I have a java swing application that needs to retrieve data from SQL Server on network...I know how to get it done when having SQl Server running on same machine that's running swing application... But I have no idea how to do it when having SQL