I tried everything and still can't install-is there an executable?

I read all the posts in the shockwave forum and tried every
suggestion and it won't install. First, it was an endless loop of
always asking me to accept the active X control, click on the gold
bar, etc, back and forth. I tried accepting all cookies, turning
off my firewall, changing my security settings to downright
dangerous, and now there is nothing on the download page but that
blank box and I get one prompt to run an active x control and then
nothing. My time settings are correct, I uninstalled the old
version and now I have no shockwave at all, I have tried
everything! The only thing I haven't tried is uninstalling Flash
because I'm afraid if I do that I won't be able to reinstall that
either. When I go to the support page there is a link to download
an executable file but that just takes you back to the original
installation page and the same problems.
Please help me if you can! I'm getting gray hairs over this.
I know I always have problems installing shockwave when the new
version comes out but I can never remember how to do it. Why don't
you just put a link to a file you can download to your desktop and
install? Shockwave support team, are you there? I can't even figure
out how to contact Adobe support to get help other than this
forum.

Thank you very much for your reply. I really appreciate it. I
found the link you just posted by doing a google search for "I
can't install Shockwave". When I clicked on your link it didn't
work for me but it looks like the same thing. Here it is again for
anyone else:
http://fpdownload.macromedia.com/get/shockwave/default/english/win95nt/latest/Shockwave_In staller_Full.exe
Are the links wrong on the download page or something?

Similar Messages

TS1398 my iphone 4s can not scan any wifi network, i tried everything but still can not scan any wifi connection even though our wifi is working properly in our mac book and ipad. What do i need to do if the problem is the hardware?pls help

my iphone 4s can not scan any wifi network, i tried everything but still can not scan any wifi connection even though our wifi is working properly in our mac book and ipad. What do i need to do if the problem is the hardware?pls help

When you say it "can not scan any wifi network" do you mean it is not detecting Wi-Fi networks?
Is Wi-Fi turned on in Settings > General > Wi-Fi?
Have you tried Settings > General > Reset > Reset Network Settings?
Is it just the home network that the device will not connect to? or any network?

If you tried everything and still get USB Parent d...

For those that have tried everything and still receive the USB Parent fatal error.
I have tried everything on these forums and spend several hours getting it working. Finally I got it to working and with the latest version.
Here is what I did:
1. Run Nokia PC Suite Cleaner (No reboot)
2. Run a search through windows drive (probably c for anything "Nokia" and deleted.
3. Run registry cleaner (CCleaner).
4. Took groa's advice and added registry entry:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Wdf01005]
"SystemComponent"=dword:00000001
5. Checked through Add/Remove programs and deleted anything Nokia related.
6. Reboot computer.
7. Plugged in phone to charger.
8. Folled PC Suite installation and plugged in phone when prompted.
All drivers were installed successfully and phone is now recognized.
I hope this helps anyone that is still having this annoying problem.

Glad that worked for you. I don't know what step did it, but it did and that's what matters.
*** I forgot to mention for step 3. I ran CCleaner for both Cleaner and Registry (making a registry backup). And lol I typo'd step 8. folled = followed.
For anyone else that doesn't know how to make a registry entry, here's how:
1. Make a new notepad file and add the following:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Wdf01005]
"SystemComponent"=dword:00000001
2. Save the file as X.reg (the X can be whatever).
Then you just click the file and import into your registry.
Message Edited by mod777 on 08-Nov-2008 05:07 PM

I've tried everything but still can not! get rid of Babylon. Has anyone found a long term or permanent solution?

I've tried everything but still can not! get rid of Babylon. Has anyone found a long term or permanent solution? I've tired uninstalling and reinstalling FF, done the about:config which also hasn't worked. I've deleted everything to go with this stupid search engine but still it reappears. It's just ridiculous. Please help!!! I don't really want to use another web browser

Did you check these?
*[[/questions/935739]] and [[/questions/935739#answer-367152]]
*[[/questions/923451]]
*http://support.babylon.com/index.php?/Knowledgebase/List/Index/48/english-faq
*http://support.babylon.com/index.php?/Knowledgebase/List/Index/37/installation--technical-support

I've tried everything and still am unable to join my own wifi network from my iPhone 4s

I have an AirPort Extreme running the latest software. I've tried everything and still am unable to join my own wifi network from my iPhone 4s, iPhone 3Gs, iPhone 3G, my girlfriend's iPhone 4. The only devices that will connect to the network are our MacBook Pros and iPads, (1 and 2). I have reset the airport to default settings, I've restored my iPhone, I've even disabled the password. I am still unable to join my open airport extreme wifi network. PLEASE HELP!

Saying you tried everything isn't helpful. Perhaps describing in detail what you've done would allow people to better assist you.
If you're ever experiencing strange problems connecting to any wifi point you can always try resetting your network settings on your iPhone itself. This solves the majority of wifi problems.
To do this go to Settings > General > Reset > Reset Network Settings. This will clear all of your saved wifi hotspots and passwords, and hopefully solve your issue.
Please try this and respond with your results.

When trying to sign into the Itunes Store I get error message "Itunes store not available at this time- please try again later". I've updated everything and still can't get in. Any ideas??

When trying to sing into the Itunes Store I get error message "Itunes store not availble at this time. Please try again later" I've updated everything and doesn't help. Anyone have any ideas?

Send a PM(Private Message) to ATT Uverse Care.

HT2693 Please give me credit or my money back because I tried everything and still have a proble. I purchased it from amazon and worked fine. Please return my money or give me credit on my accout to resolve this .....Thanks

Please return my money or give me credit on my accout. The downloan would not work and have tried everything. I purchased it from amazon and works great. So please credit my account. THANKS

THANK YOU SO MUCH stussaar!
My Mother did what you said for the Spam and my number was in there about 100 times. She deleted all them. Deleted me as a contact and then rebooted, then she text me and I text her back and I went right into the Spam again. I told her to tell TMobile this so then can maybe help and remove my number from Spam on their end.\
Thanks you so much! you got us 99.999 % the way there!!
I appreciate your help!!!! I hope this worked also for your problem!!
Thanks again!!!
Mike

Razr: Eternal red eye! Tried everything and still nothing!

Moto droid razr, over a year with it now. Ran out of battery yesterday and when try to turn it on (after some minutes plugged in) the dreadful red eye came out.
I did a soft reset and ended up in the red eye again.
I wiped the cache partition and rebooted it, red eye again.
I did a factory reset and rebooted it, red eye again.
Battery ran out again, charged it, turn it on, and you can guess what happened
Anyone has any ideas of what can I do next?
Appreciate your time, thank you in advance.
For reference I followed the instructions provided on this page by user hydrogenous ( http://www.razrforums.com/forum/droid-razr-maxx/3253-phone-stuck-load-up-screen.html). Below is a copy of sucj instructions if you don't want click on the link
Issue: Your Motorola Droid Razr Maxx is stuck on the "droid eye" screen during boot. You haven't rooted your phone or anything.
Solution: Remove your SD Card and reboot the phone by holding the power button. It's still stuck on the screen, right?
Hold down the POWER, VOLUME UP, and VOLUME DOWN buttons until the screen goes blank.
Once the screen turns off, hold down the VOLUME UP and VOLUME DOWN buttons once again.
You should now see a diagnostic screen with several options. Read the first few lines. Use the VOLUME DOWN button to highlight "recovery", and use the VOLUME UP button to select this option.
Now you should see the "Droid Triage Screen". It's a dead android with a triangle. The exclamation ("!") symbol is inside the triangle. Am I being detailed enough?
Press and HOLD the VOLUME DOWN button. WHILE you are holding this button down, press and RELEASE the VOLUME UP button. Now release the VOLUME DOWN button that you were holding for the duration of this step.
A new screen will come up. Use the VOLUME DOWN button to select "WIPE CACHE PARTITION", and use the POWER button to select that option.
The phone should complete the operation and return you to the triage diagnostic mode. Now you want to select "FACTORY RESTORE/RESET". I don't think that's exactly what it's called, but I do know that Factory is in the name. Seriously, I've had too much scotch and my short-term memory is a bit fuzzy. I'm also watching Archer. Hilarious. This process is going to wipe all of your data. That's why you should have downloaded a backup app, but screw it-- your phone is bricked anyways.
Let this option run for a few moments. For me, I had to wait about 2 minutes. During this process I saw absolutely no load bar or status until my phone's "low battery" warning honked at me. I pressed "Okay", and then I saw a "Processing" screen. I think you're going to have to be patient. Maybe your "processing" bar will show up right away. I don't know.

FIXED
I had this issue previously and after a few soft resets and some patience it finally came back on.
Today, I wasn't so lucky... 3 hours of soft resets and waiting with no change in response.
I ended up removing both my SD and SIM card (better safe?), and rebooting to the "Triage Screen." I cleared the cache ONLY and rebooted the phone. It took a while, but finally came back to life! I then installed both the SIM and SD cards and all is well (for now.)
This is a non-rooted first-gen MAXX, and I've had SOOOOOOOO MANY problems with it. I've had an SD card become unformatted, many many missed calls due to general unresponsiveness, and intermittent battery charging/restarting issues. After the SD card was blanked I did a factory restore (about 2 weeks ago) and it's been better, but still not like it was when it was new.
Result: My phone is currently up and running after the cache wipe, but I'll be switching to Samsung in 2 weeks when my contract is up.

HT5824 Does anyone know how to transfer my contacts from my iphone onto my icloud that is on my laptop please? I have lokd and tryed everything and still i have no idea how to do it.Yur help would be apreiated.thanks

Does anyone know how to transfer my contacts from my iphone onto my i cloud please? I cnnot do it no more s they have made something so simple to do into a task that seems so omplicated.ive tryed ooads and now im starting to loose my cool.Thanks if you can help.I bet it's really easy to do,but im not seing it clearly.

On your Mac.
Sign into iCloud, turn Contacts and anything else you want, on.

I have the same problem with printing as by laurieb13019. Have tried everything and still cannot print a document.

I have tried everything to print a .PDF document in Adobe Reader and cannot. It is printable with another .PDF software but not with Adobe Reader.

You cannot attach files or screenshot in email replies; it won't make it into the forums.
How to share a document with the forum:
https://forums.adobe.com/thread/1408375
How to post a screenshot:
https://forums.adobe.com/thread/1070933

I recently purchased an iphone 4S. I cannot sync it to my computer. I updated the ram to 1 GB and the os to snow leopard 10.6. I have tried everything and still cannot sync my phone to my computer

I updated my os to snow leopard v10.6 to be able to sync my new iphone 4 S. I also updated my ram to 1 GB to support the new software. I still cannot sync my iphone 4 S. I have tried everything to no avail. Any suggestions?

Update iTunes, too.

I've tried everything and still no response on Ipod

My duaghter has a Ipod mini, Pink in color. I plug it in and it says go to apple.com/ support for help. Did that ordered new battery and put it in and still ends up showing me a frown face and a battery that is not charging on the screen when I plug it in. tonight I found out that her friends over this weekend pluged in to our computer to download songs and their ipods are now frozen. I'm about ready to throw this thing in my lake out back. Sure would like to know if any body has any good ideas. Thanks, Shawn

"tonight I found out that her friends over this weekend pluged in to our computer to download songs and their ipods are now frozen"
That's a little odd and maybe there's a problem with your computer? There's also a pretty comprehensive post here about the sad iPod icon.
The sad iPod icon is one of the most difficult errors to cure as it usually means a hard drive problem.
http://discussions.apple.com/message.jspa?messageID=2355839#2355839

I wanted to sync my ipod to my itunes but it went all black and then they say it is in recuperation mode ? then error 1604 appears and i tried everything and still not working what can i do ?

and now i can't use my ipod because there's this picture of itunes like i should connect it ...

Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I have tried to install flash up date. I couldn't remember password. Kept getting hint "age". Tried several ideas, no help. Went to Adobe, changed password, then tried again, and still can't get in and continue to get same hint, "age".

ing

You've posted this multiple times. I answered one of the other threads. Locking this one.

I've tried everything and still my Firefox says it's still running.

I've tried restarting my computer, deleting Firefox and re installing, deleting the parent lock file, and it still wont open. I would love to have my Firefox back :(

You may have checked this, but since you didn't mention it: if you open the Windows Task Manager, can you find and terminate any instances of the firefox.exe process? Ctrl+Shift+Esc opens the Task Manager, then click the Processes tab. It's worth clicking the button to view processes started by other users just in case.

I tried everything and still can't install-is there an executable?

Similar Messages

Maybe you are looking for