I tried iPad2 to ipad2 FaceTime .i could hear, but the other party had no volume. Any thoughts?

I tried iPad 2 to ipad2 FaceTime and the receiving party could not hear . Any thoughts??

See here http://support.apple.com/kb/HT4319

Similar Messages

  • Sometimes when I am trying to make a call, I can't hear the connecting tone in my phone, but the other party's phone is ringing. It happens every now and then (not everytime), I wonder if you guys face this problem too.

    sometimes when I try to make a call to someone, I can't hear the connecting tone im my phone, but the other party's phone is ringing.  I have to end the call again and make another attempt.  The connecting tone could only be heard after I made a redial.  I have checked with many friends on different telcos, and they told me they also face this kind of problems.  Can this problem be rectified?

    I went back to the service provider twice and they reactivated my phone the first time and the second time the tech rebooted the phone and told me how to tell if it was on my end or the other person's end.  Of course it didn't happen at the store, but right after I left I called a family member (on my plan) and the phone did this problem. It can be frustrating.  The cell towers are strong in my area, so it can't be that.  My next stop is to an Apple store but I am waiting until after Christmas.  I can't deal with the shopping crowds!!!

  • HT204380 Facetime Activation: Could not verify the email address. Please re-enter and try again.   Tried so many times,even changed my appe ID and purchased a new facetime for iMac running 10.8.4 Mountain Lion,yet still same outcome. Can somebody help me?

    Facetime Activation: Could not verify the email address. Please re-enter and try again.   Tried so many times,even changed my appe ID and purchased a new facetime for iMac running 10.8.4 Mountain Lion,yet still same outcome. Can somebody help me?

    I have the same problem. FaceTime works fine on my iMac but when trying to use FaceTime on my Macbook Air, I have the same issue you describe.

  • When I start up the computer, the dialogue box opens and saying that the procedure entry point splite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.  I tried to fix this problem by redownloading itunes, but the problem still

    When I start up the computer, the dialogue box opens and saying that the procedure entry point splite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.  I tried to fix this problem by redownloading itunes, but the problem still persists.  How can I fix it?  thank you.

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Reboot and see if all is well
    In case that your OS is Windows 7 (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "SQLite3.dll"
    3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Paste file "SQLite3.dll" to the location.
    5. Reboot your computer, it should not display that message, it should be clear.
    Good Luck

  • TS4431 Hi after trying to update my iPhone 5s while connected to iTunes on the Mac I got a notice saying it could not update the phone (error message: (-1)). Any idea what this error message means? Is it a space issue?

    Hi after trying to update my iPhone 5s while connected to iTunes on the Mac I got a notice saying it could not update the phone (error message: (-1)). Any idea what this error message means? Is it a space issue?

    Resolve iOS update and restore errors

  • Hi guys, my ipad2 says that it needs to cool down before using. It has been sitting in a cool place over a day now but the message still pops up. Any other ideas? or help?

    Hi guys, my ipad2 says that it needs to cool down before using. It has been sitting in a cool place over a day now but the message still pops up. Any other ideas? or help?

    Is the iPad Off and not connected to the charger?
     Cheers, Tom

  • My iphone 4s turns off and restarts after a few seconds or minutes to establish a FaceTime call. I've tried "Restore iPhone" but the same thing keeps happening. Any solution?

    My iphone 4s turns off and restarts itself a few seconds or minutes after when I establish a FaceTime call. I've tried "Restore iPhone" from iTunes but the same thing keeps happening. Any solution?

    Settings > General > Reset > Reset Network Settings
    Also, if this only happens with one Wi-Fi network, power cycle that Wi-Fi router.
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order.

  • FaceTime keeps trying to call but the other person doesn't receive it.

    I'm trying to FaceTime an iPhone 5 and it just keeps ringing forever. The person on the other end doesn't receive any notification that I'm trying to call. I'm having the problem on both my iPhone 6 and my Macbook Air (mid-2013), and have tried on both WiFi and mobile (4G) networks. They are both using the same Apple ID account, and everyone involved has everything updated to the max. I've tried signing out of my Apple ID account and back in again on both devices, at different times and at the same time, with no effect.
    I have previously FaceTimed the same person successfully from my iPhone 6 (over 4G, in January when I first got the phone) and Macbook (last year, and over a different wifi network).
    It's super frustrating that Skype is being more reliable than FaceTime.
    Thank you in advance for your help!

    Good day la_pahina, 
    Thank you for participating in the Apple Support Communities. 
    You mention that you're not able to make a FaceTime call using your iPhone 6 or MacBook Air. It can be frustrating when services like FaceTime don't work as they should.
    Making sure all devices are updated to the max was a good troubleshooting step, as well as signing out and back in to FaceTime, and switching between Wi-Fi and Cellular networks. 
    If you are they have had the opportunity to test: Can you place FaceTime calls to other people, or can they receive FaceTime calls from other people?
    Depending on if you or your friend see this behavior when making or receiving FaceTime calls to other people, you or they can try the additional steps in this article to troubleshoot the issue further:
    If you can't make or receive FaceTime calls - Apple Support
    Sincerely,
    Jeremy 

  • So randomly my ipod crashed and when i turned the ipod on again it was all white and blurred. Part of the screen is up to speed but the other half is slow. Already tried turning it completely off and restoring it on the computer

    So randomly my ipod crashed and when i turned the ipod on again it was all white and blurred. Part of the screen is up to speed but the other half is slow. Already tried turning it completely off and restoring it on the computer

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.  Also, if you have IOS-7, read this.

  • When using FaceTime on my iMac, the other party cannot hear me but i can hear them

    Recently (today) while using facetime on my IMAC, the other oarty was unable to hear me though I could hear them, (the mute button was/is not on)
    we determined it was on my end as I had no problem facetime using my ipad, I would appreciate any help.

    Test your microphone in the Sound preference pane.

  • When trying to update my apps on my phone, after logging in it says my account has been disabled for security reasons. I've updated my password but it still says its disabled. Any thoughts?!

    When trying to update my apps on my phone, after logging in it says my account has been disabled for security reasons. I've updated my password but it still says its disabled. Any thoughts?!

    Hi,
    If you have followed everything in the link below, and still have the problem, click on one of the links at the very bottom under "Additional Information". That's all we can do for you here:
    http://support.apple.com/kb/TS2446
    Cheers,
    GB

  • I am using chat-r wireless and facetime is not working but when i put rogers fido or any other carrier sim in it work. Anyone know what the problem?

    I am using chat-r wireless and facetime is not working but when i put rogers fido or any other carrier sim in it work. Anyone know what the problem?

    I'm guessing it's a compatibility problem similar to that that T-Mobile in the US has. I'm not familiar with chat-r wireless, but I'm guessing it's not a supported carrier for the iPhone. If they can't tell you how to fix it, I'm guessing it's just plain not going to work.

  • HT1338 I am trying to upgrade my iPhone via my macbook but the messageThere are purchased items on the iPhone "Mark Price's iPhone" that have not been transferred to your iTunes library. You should transfer these items to your iTunes library before updati

    Good morning
    I am trying to upgrade my iPhone via my macbook but the following message keeps coming up and the download does not work
    "There are purchased items on the iPhone “Mark Price’s iPhone” that have not been transferred to your iTunes library. You should transfer these items to your iTunes library before updating this"
    Please advise how I can transfer these files, I am not sure what files are in question.
    I've only had the MacBook a couple of days, I am PC savvy but this is all new to me so please keep it as simple as possible. I am a brit based in Bahrain.
    Regards
    Mark Price

    okay I've done everything regarding the transfer process (via file>transfer purchases) and syncing, so everything on my iPhone device seems to have been transferred to my iMac... however, I still get that message ("There are purchased items on the iPhone..."), trying to upgrade the iOS Have tried several times the same process of hitting transfer purchases via file, but nothing seems to make that message go away! Would have been nice to know which files I actually do need to transfer, which I don't get any info on of course...
    Starting to get really annoying this thing.. Any smart suggestions what's going on?

  • I've problem with Game Center . I can't sign in Game Center on my iPad . I tap on the Game Center icon but the page is blank. I tried go to setting, my Apple ID appear but the page keep on loading and  nothing pop up. How to resolve this issue?

    I've problem with Game Center . I can't sign in Game Center on my iPad . I tap on the Game Center icon but the page is blank. I tried go to setting, my Apple ID appear but the page keep on loading and  nothing pop up. How to resolve this issue?

    Hi, bamboo64. 
    Try closing all open applications in multitasking and power cycling the device.  Once this is done test the results.  If the issue persists, I have included a couple troubleshooting articles that I would recommend going through. 
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Troubleshoot issues on an iPhone, iPad, or iPod touch
    If you haven't been able to connect to the iTunes Store:
    Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
    Note: Time Zone may list another city in your time zone.
    Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
    Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
    Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
    Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
    Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
    Try resetting (turning off and then on again) your Wi-Fi router.
    If the issue persists, try troubleshooting your Wi-Fi networks and connections.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Cheers,
    Jason H. 

  • My IPod is not showing up in my Itunes, I tried my phone as well and it is not coming up either.  I have tried everything including uninstalling and reinstalling.  It worked the other day but it is not working now.  Please somebody help me!!! What to do?

    Hello,
    Can someone please help me!?  I am trying to put music on my IPod and it was working the other day.  I can not get itunes to recognize my Ipod.  I have tried to unistall and reinstall Itunes.  I have tried all the steps on the site and can't get it to come up.  I tried my IPhone which was also showing up just the other day and it also is not showing in Itunes!   Please help me.  I need to be able to put music on my IPod for my work. 

    I have sorted it myself!!
    Ipod is now in the top right corner, last time I clicked on it, it ejected it but by clicking on the actual ipod icon then it brings up your ipod. I restored it to factory settings and synced all my music and it now works again. Hope this can help anyone who ends up with the same problem.

Maybe you are looking for

  • GR/IR Account with Wrong Commitment Item

    Dear Experts, When we doing GR(MIGO), system is not deriving the commitment item from FMDerive, istead taking the commitment item from offsetting GL entry. Is it common behavior? If not, how to force GR act derived into right commitment item which it

  • Help With creating a trigger

    Hello All! I am writing regarding a trigger I must create. I have a table that has roughly 10 columns. I must insert rows into a 'history' table when any column in the parent table is updated or, of course if there is an insert on the parent table. I

  • Problems importing a JavaScript (.js) external file

    Hello everyone, Within RoboHelp, I was able to write a JavaScript function for a link that asks our customer if a topic was helpful.  The code basically populates the topic name in the subject line in the e-mail to prevent us from entering the topic

  • ODBC data sucessfully connects, but NEXT button doesn't work

    In short I have a forum which sucessfully gets the first record from the DataConnection.  The problem is I seem to only be able to get the first record and cannot navigate to other records. I have added a NEXT button, set up for JavaScript, Client, o

  • Regd. Use of Communication /Service user

    Hi All, I have a web service to Proxy scenario have created a user of type communication data. the roles assigned are : SAP_XI_APPL_SERV_USER SAP_XI_IS_SERV_USER Q>  With this user i am able to open/create/edit object in  IR and ID using the URL (i.e