I tried the troubleshooting tips posted above, Still can't sync w/outlook

Since I upgraded to version 1.1.3 I can't sync with Outlook Calendar on my PC. Before 1.1.3 it took a while (several minutes) now it always gives the error message "iphone has disconnected cannot sync" (or words to that effect)
I went through each troubleshooting step above. Nothing seemed to work. The strange thing is I only got the message asking if I wanted to merge data once. I didn't even get it after I completely uninstalled itunes and all apple apps from my PC. All I really need to sync on my PC is Calendar. Everything else gets synced on iMac.
Any one have any ideas on this??? Thanks, Chip

Thanks for the reply. The Itunes trouble shooting in Itunes help. I don't get an error message, it just states can't see ipod like if it wasn't plugged in. I do get an error message on a few of the songs when sync that say error 50, and state that they can't be loaded to ipod. The weird thing is that I can load all of my libary except the latest 3 albums. They are in my libary but they won't load. I'm not sure but it seems like it started when the cloud came about from amazon which is where I buy most of my music.

Similar Messages

Have a classic 5th gen. have restored, relaoded itunes, gone through the troubleshooting tips and I still can't sync my latest 3 albums to my ipod. It will sync all but those. Also, when go through ipod trblshoot and select check, says can't see it sync.

Have a classic 5th gen. have restored, relaoded itunes, gone through the troubleshooting tips and I still can't sync my latest 3 albums to my ipod. It will sync all but those. Also, when go through ipod trblshoot and select check for sync, says can't see my ipod. pls help

Thanks for the reply. The Itunes trouble shooting in Itunes help. I don't get an error message, it just states can't see ipod like if it wasn't plugged in. I do get an error message on a few of the songs when sync that say error 50, and state that they can't be loaded to ipod. The weird thing is that I can load all of my libary except the latest 3 albums. They are in my libary but they won't load. I'm not sure but it seems like it started when the cloud came about from amazon which is where I buy most of my music.

HT1527 I have windows 7 and have tried the troubleshooting steps but am still unable to connect to the itunes store yet my PC is connected to the internet, it just keeps looking like its trying to access the store

I have windows 7 and have tried the troubleshooting steps but am still unable to connect to the itunes store yet my PC is connected to the internet, it just keeps looking like its trying to access the store

I have the same problem but the solution Wendyz99 did has not been successful for me. Part of the itunes store loads on the right side where the tabs for Quick Links and Top Charts are but the center section of the page is white. Also if I click on a song that is in the top chart area it will take me to the page but I'm not able to purchase the song or preview the song.
I feel I have tried all the solutions I can find on line and even had conversations with apple tech with no help.
I have down loaded the Autoruns program and in the winstock providers I have Bonjour and Microsoft Windows Live ID Namespace Provider. I have removed Windows Live and this still does not resolve the problem. I am at a complete loss. I am running windows 7, 32bit. Someone please help!

Iphone 4s is working for example can play,music recieve texts ,calls ect but has black screen and have tried the force shutdown method but still can see what im doing on the screen

iphone 4s is working for example can play,music recieve texts ,calls ect but has black screen and have tried the force shutdown method but still can see what im doing on the screen

Did anything happen to prior to your phone acting this way? It sounds like your screen is dead, but it is hard to say without knowing what what the cause.
1) was this a gradual problem? Did the phone screen start dimming a couple months ago and now has degraded or after some event (known or unknown to you), the phone started behaving this way.
2) Can you give more specifics on the problem? You said you have a black screen, but also you can see what you're doing on screen. Is the screen just really dim? Is the screen completely black? Does anything else besides attempting to reset the device cause it to flash white?

TS4062 Tried all Apple suggested resolutions and still can't sync using wifi

Anyone out there still having wifi syncing issues? Can't get Itunes to recognize device and my Iphone is shaded grey even with it connect to wifi.

Try locating your account first - http://support.apple.com/kb/HE34 - then contact support for assistance if you'll have a hard time doing so.
https://expresslane.apple.com

TS1702 I installed Adobe Reader so I can read PDFs a teacher has posted online. How do I open the documents using Adobe? I tried the open button, but I still can not get more than the first page. Thanks

I installed Adobe Reader so I can read PDFs a teacher has posted online. How do I open the PDFs? I tried using the open button at the top, but I'm only able to see the first page. Thanks

I had the same problem.
Try this.
https://igppwiki.ucsd.edu/groups/publichelpwiki/wiki/a1538/Howto_Disable_Acrobat _as_the_Safari_PDF_Viewer.html

Address autocomplete too slow since the program updated to version 31. I went through all the troubleshooting tips and it still is slow.

I had this same issue with Seamonkey. I have about 4700 names in my address book. When replying to an email, or creating a new email, the auto email lookup function is very slow and unresponsive. It will generally take 10-20 seconds before it starts to work. Since the update to ver 31, now all my collected email addresses are coming up all red color. It is like all history is gone. It doesn't recognize that these email addresses are in my address book or something...thank you.

The spurious red addresses is a known bug:
https://support.mozilla.org/en-US/questions/1012002
while the slow operation of autocomplete is probably due to a new feature, that may become a bug:
https://support.mozilla.org/en-US/questions/1011952

Passcode. I did the add a device but still can't sync to i phone

I can't get past the passcode on my iphone for the connect to sync

You need to be more specifc. What exactly isn't working and are you referring to downloading from the web site or actualyl installing and activating the program?
Mylenium

After upgrading, I am getting the dreaded "iTunes has stopped working" message. I've followed all of the troubleshooting tips on the forum without success. Fortunately, it works on my other computers. Running Win7 pro.

After upgrading iTunes, I'm getting the dreaded "iTunes has stopped working" message after launch. I've tried the troubleshooting tips on the Forum without success (though most are pretty old...). Fortunately, iTunes works on my other computers, but I have iPad backups on this one that I'd like to keep. Anybody else with this issue??

My inclination is that it is something in the projects or in the manuals being linked that is the culprit because that is where the consistency lies - projects were created identically and manuals all follow identical formats. The problem typically only occurs after the project has been successfully created and the manual is subsequently updated and I am syncing the manual in RH so I can generate a new AIR file. This is the first time the project has consistently corrupted every time I try to generate the Word document after linking it in RH. This makes little sense to me since it generated fine a couple weeks ago and I did nothing special when I updated it in Word yet when I tried to update it in RH, that is when it originally corrupted. The bottom line is that I cannot 100% trust that any project I run will work the next time. I end up just crossing my fingers and hoping for the best.
My problems seemed to start once I went to RH9 (from RH8) because we had upgraded from MS Office 2003 to the 2010 version and I needed 9 for the docx extension. Like I said, it is not all the time - I can be beating my head against the wall getting one of the projects to work, then create 3 more projects that have no problems and then the next one leaves me wanting to throw my PC through a window....
Deleting the CPD does not corrupt the project, it just removes my default linked document that allows me to circumvent linking the styles individually for that project. Once I have a manual linked and I remove the CPD, it just creates a new one. What I am saying is that if I delete the CPD file, it does not prevent the project from corrupting nor does it make the corrupted project viable again.
thanks!
Kathi

Inbuilt isight camera is detected in system profiler but no image is being detected only a black screen shows up. I have tried all of the troubleshooting instructions and it still wont work. The iMac im using is OS X 10.6 and was an ex-floor model

inbuilt isight camera is detected in system profiler but no image is being detected only a black screen shows up. I have tried all of the troubleshooting instructions and it still wont work. The iMac im using is OS X 10.6 and was an ex-floor model

Hi,
I would try a Safe Boot first. (This will take longer than a normal Boot and you will need to Restart afterwards).
If it were an older OS I would also suggest going to System Preferences > Displays and making sure the display is set to Millions. (My MacBook Pro does not have this option in Snow Leopard so I did presume Snow Leopard does not have it).
With some laptops there have been some issues with the cable up the back of the screen pulling loose with regular and frequent use of the lid, but this will not apply to you based on your specs. (it does take time to appear and is also somewhat rare). However it seems enough contact with the camera can make it appear in System Profiler and power it on but not give a pic.
If a Safe Boot does not work I would also try a PRAM reset.
Shut down the computer.
Restart it holding down Apple/CMD (or ⌘)+ALT( ⌥)+P+R Keys until you have heard three Start Up Bongs.
This is actually "less" destructive in that it clears less memory items than Safe Boot but they are different enough to warrant trying.
Do you have an older version of iGlasses installed ?
The one for Leopard does not work for Snow Leopard.
Do you have Web Browser open ?
This may point to Google Video Chat Plug-in and Flash Conflict. It would be rare to allow another app to access the camera even if not displayiong a Pic.
(Chrome Installs the Plug-in as does the standalone download).
Knowing what "any application" exactly you are trying might help us pin it down.
Any additional downloaded apps that can use the camera ?
Do you happen to have something balck in front of the camera ?
8:20 PM Sunday; October 9, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

My ipod nano 6th gen wont charge, turn on or respond to anything i have done i have tried the troubleshooting and nothing works. I have droped it once but it work for about a month after and i havent wet it any tips would be much apriciated! thanks

My ipod nano 6th gen wont charge, turn on or respond to anything i have done. I have tried the troubleshooting and nothing works. I have droped it once but it work for about a month after and i havent wet it. any tips would be much apriciated! thanks

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

(final cut pro x 10.0.9 )After numerous troubleshooting tips, I am still getting the dreadful your disk have ran out of space, your events have moved or permissions have changed. This happened after I moved some files to another drive. They won't relink?

(final cut pro x 10.0.9 )After numerous troubleshooting tips, I am still getting the dreadful your disk have ran out of space, your events have moved or permissions have changed. This happened after I moved some files to another drive. They won't relink eventhough the files are there.

(final cut pro x 10.0.9 )After numerous troubleshooting tips, I am still getting the dreadful your disk have ran out of space, your events have moved or permissions have changed. This happened after I moved some files to another drive. They won't relink eventhough the files are there.

Hi,my name is Hemanth.Im using ipod touch and my ipod is not detecting in itunes but detecting in my computer.Im using windows7 os.I tried the troubleshooting process given in web but still it not working please help me.

Hi,my name is Hemanth.Im using ipod touch and my ipod is not detecting in itunes but detecting in my computer.Im using windows7 os.I tried the troubleshooting process given in web but still it not working please help me.

Did you try everything here:
iOS: Device not recognized in iTunes for Windows
Then try a different computer to help determine if yo have an IPod or computer problem.

HT1339 I have tried all the troubleshooting tips online but my Classic ipod doesnt work. My Itunes keeps telling me that it cannot restore the ipod because the ipod is busy. What can I do?

I have tried all the troubleshooting tips online but my Classic ipod doesnt work. My Itunes keeps telling me that it cannot restore the ipod because the ipod is busy. What can I do?

Have you tried rebooting for the Mac and iPod to see if that helps? To reset the iPod, press and hold both the Select/Center and Menu buttons together long enough for the Apple logo to appear.
It wouldn't hurt to also try plugging the iPod into another USB port and use a different USB sync cable.
B-rock

My Ipod Touch is not responding. I have restored, I have recovered, I have followed the troubleshooting tips. It is still frozen and I can't turn it on or off. Is there anything else that can help?

My Ipod Touch is not responding. I have restored, I have recovered, I have followed the troubleshooting tips. It is still frozen and I can't turn it on or off. Is there anything else that can help?

Let the battery fully drain. After charing for at least an hour try a reset and restore.

I tried the troubleshooting tips posted above, Still can't sync w/outlook

Similar Messages

Maybe you are looking for