I tried to burn windows 7 Iso using disk utility for more than 3 time with the minimum speed, but all the three times I got error saying "disk burn failed unable to verify"?

I have tried with three different blank DVDs but all got the same error message. But after I got the error message when I reinsert the DVD I can see the ISO in the DVD. So I went a head with the installation but the installation stops just after it starts. I have even tried burning the disk at 2X speed.

It sounds like your optical drive may be dirty. The lens probably needs a cleaning. You can go to somewhere like Best Buy and pick up a cleaning kit.

Similar Messages

  • An error ocurred while loading this content! Ive using my ATV for more than 6 months and last week i update the sw and since then i have rented two movies and keep seeing the same message. I have reset the ATV two times without success. Any suggestions?

    I keep getting this message: AN ERROR OCURRED WHILE LOADING THIS CONTENT
    ATV was working fine until i did a version update last week. Since then i have rented two movies and keep getting the same message
    I restarted the ATV - no success
    I reset my wireless - no success
    I reset my ATV - no success
    netflix is working fine since i was able to see a movie there. Youtube was also working fine. I think there should be something wrong with iTunes
    Any ideas?

    I keep getting this message: AN ERROR OCURRED WHILE LOADING THIS CONTENT
    ATV was working fine until i did a version update last week. Since then i have rented two movies and keep getting the same message
    I restarted the ATV - no success
    I reset my wireless - no success
    I reset my ATV - no success
    netflix is working fine since i was able to see a movie there. Youtube was also working fine. I think there should be something wrong with iTunes
    Any ideas?

  • Help in using listagg function for more than 8000 char.

    Hi Friends,
    Need you urgent help in using listagg function for more than 8000 char.
    I did the below sample SQL and in "e_orig" and "d_orig" for upto 4000 char it is working fine but I have to use it for more than 8000 char. and it is giving error,
    I checked the listagg function is having limitation of 4000 char.
    I tried but I am unable to achive this. Can someone provide me a sample example to achive this
    select d.dname,d.loc,e.hiredate
    ,listagg(e.ename,',' ) within group (order by e.deptno) over (partition by e.deptno) as e_orig
    ,listagg(e.ename, ',') within group (order by e.sal) over (partition by e.deptno) as d_orig
    from emp e, dept d
    where e.deptno=d.deptno;[ This is my first post, I gone through the guideline for posting a post , and try to go according to that ( I have not pasted here create table and insert as I have used basic table emp, dept for example), please let me know if still I should give this, I will take care from my next post ]
    Thanks in advance

    Interesting, I didn't know you could do that, but...
    BluShadow wrote:
    You could write some PL/SQL code that does it all for you, but that would involve loops and would be slow.Well, objects are written in PL/SQL aren't they? And presumably there'll be implicit looping too? So it's not at all obvious that this method will be faster than doing the joining in PL/SQL in memory. The only way to find out is to benchmark them - so I have done that.
    I noticed that OP's ref cursor actually only ever retrieves a single record for a bound department number, so I decided the best thing would be to test using a procedure that passes an output string back. I selected all (109) employees and put spaces in to ensure above 4000 characters. I also noticed that as he is using PL/SQL he probably can use a VARCHAR2 type, but just not ListAgg in the query, so I wrote short procedures as follows:
    SimpleAggChr     - bulk collect and array processing, VARCHAR2 output
    ClobAggPrc     - the custom aggregation method, CLOB output
    SimpleAggClob     - bulk collect and array processing, CLOB output
    I then wrote a driving script that calls them in the order above and times each call (I like benchmarking so I have my own timing object to make it easy). I then print the lengths for checking, and my object writes the timings to my output table. Running a few times I got varying results, but generally it looks like there isn't a lot to choose between them for performance.
    Here's the procedure code:
    CREATE OR REPLACE TYPE char100_list_type AS TABLE OF VARCHAR2(100)
    CREATE OR REPLACE PROCEDURE SimpleAggChr (x_out OUT VARCHAR2) IS
      l_enames     char100_list_type;
    BEGIN
      SELECT first_name || '                                        ' || last_name
        BULK COLLECT INTO l_enames
        FROM employees
       ORDER BY salary;
      FOR i IN 1..l_enames.COUNT LOOP
        x_out := x_out || l_enames(i) || ',';
      END LOOP;
    END SimpleAggChr;
    CREATE OR REPLACE PROCEDURE SimpleAggClob (x_out OUT CLOB) IS
      l_enames     char100_list_type;
    BEGIN
      SELECT first_name || '                                        ' || last_name
        BULK COLLECT INTO l_enames
        FROM employees
       ORDER BY salary;
      FOR i IN 1..l_enames.COUNT LOOP
        x_out := x_out || l_enames(i) || ',';
      END LOOP;
    END SimpleAggClob;
    SHO ERR
    PROMPT ClobAggPrc
    CREATE OR REPLACE PROCEDURE ClobAggPrc (x_out OUT CLOB) IS
    BEGIN
      SELECT clobagg(first_name || '                                        ' || last_name || ',')
        INTO x_out
        FROM employees
       ORDER BY salary;
    END ClobAggPrc;
    SHO ERRand the driving script:
    SET SERVEROUTPUT ON
    SET TIMING ON
    DECLARE
      l_enames_c1     CLOB;
      l_enames_c2     CLOB;
      l_enames_v     VARCHAR2(32767);
      l_timer     timer_set_type := timer_set_type ('Aggregation');
    BEGIN
      Utils.g_id := 'Aggregation';
      SimpleAggChr (l_enames_v);
      l_timer.Increment_Time ('SimpleAggChr');
      ClobAggPrc (l_enames_c1);
      l_timer.Increment_Time ('ClobAggPrc');
      SimpleAggClob (l_enames_c2);
      l_timer.Increment_Time ('SimpleAggClob');
      DBMS_Output.Put_Line ('SimpleAggChr returned string of length ' || Length (l_enames_v));
      DBMS_Output.Put_Line ('ClobAggPrc returned string of length ' || Length (l_enames_c1));
      DBMS_Output.Put_Line ('SimpleAggClob returned string of length ' || Length (l_enames_c2));
      l_timer.Write_Times;
    END;
    SET TIMING OFF
    SET LINES 150
    SET PAGES 1000
    COLUMN id FORMAT A30
    COLUMN line_text FORMAT A120
    SELECT line_text
      FROM output_log
    WHERE id = 'Aggregation'
    ORDER BY line_ind
    /and the results:
    SimpleAggChr returned string of length 5779
    ClobAggPrc returned string of length 5779
    SimpleAggClob returned string of length 5779
    PL/SQL procedure successfully completed.
    Elapsed: 00:00:27.05
    LINE_TEXT
    Timer Set: Aggregation, constructed at 03 Nov 2011 16:27:07, written at 16:27:35
    ================================================================================
    [Timer timed: Elapsed (per call): 0.02 (0.000016), CPU (per call): 0.01 (0.000010), calls: 1000, '***' denotes corrected
    line below]
    Timer              Elapsed          CPU          Calls        Ela/Call        CPU/Call
    SimpleAggChr          9.84         0.36              1         9.84400         0.36000
    ClobAggPrc            9.37         0.32              1         9.37400         0.32000
    SimpleAggClob         8.25         0.22              1         8.25000         0.22000
    (Other)               0.00         0.00              1         0.00000         0.00000
    Total                27.47         0.90              4         6.86700         0.22500
    13 rows selected.

  • I've been using iMovie '09 for more than a year and now .MTS files won't upload?

    I've been using iMovie '09 for more than a year and each time I would plug in my SD card (using a card reader) the import box would open and I could select the clips I wanted to work with. Now, suddenly, today the import box won't open. Why??? I literally just used the exact same method three weeks ago and it worked fine. I have not done anything differently. Also, when I go to "file > import from camera" it only shows the built-in camera. What am I doing wrong? And how do I get my files? I do not want to download a converter of any time. I know there has to be a way because it literally just worked three weeks ago so I'm just trying to figure out why it won't work now.

    Unfortunately, you cannot upgrade to Safari 5 or 6 on Mac OSX 10.4.11 and that is what you need to access iCloud (http://support.apple.com/kb/ht4759). I am not sure, but maybe you can install another and newer browser version of Firefox or Chrome to access iCloud.

  • My iPhone 5s won't turn on. Its battery was drained for more than a month. I tried charging it for more than an hour then pressed reset but it still won't turn on. What could be the problem?, My iPhone 5s won't turn on. Its battery was drained for mo

    My iPhone 5s won't turn on. Its battery was drained for more than a month. I tried charging it for more than an hour then pressed reset but it still won't turn on. What could be the problem?, My iPhone 5s won't turn on. Its battery was drained for more than a month. I tried charging it for more than an hour then pressed reset but it still won't turn on. What could be the problem?

    You said "reset," so Meg assumed that's what you did. But "reset" is not a button; to reset the phone you must hold the HOME and SLEEP buttons at the same time until an Apple logo appears. You may have to hold for up to 30 seconds, and if the battery was completely drained, you will have to restore iOS using iTunes on your computer.

  • Hi, ive been having trouble passing my logic sessions to another computer, we're both using a macbook pro 10.6.8 and logic pro 9 with the same plugins, the session opens in the other computer but all the synths reset to presets

    Hi, ive been having trouble passing my logic sessions to another computer, we're both using a macbook pro 10.6.8 and logic pro 9 with the same plugins (native instruments komplete 7), the session opens in the other computer but all the synths reset to presets, this didnt happen the first time I shared a session, but its been happening lately quite often

    kwmlr439 wrote:
    CSOUND Read the title please:
    Re: Macbook Pro 10.6.8 RAM Upgarde to 8 GB
    The amount of RAM is not dependant on the operating system. It is all about the model of you Mac.
    10.6.8 is the version of OS X that is installed on your system. It has no real baring on the amount of RAM that CAN be installed.
    Personally I have never had good luck with Corsair RAM. I have always had good luck with Crucial and Kingston.
    Message was edited by: Shootist007
    Message was edited by: Shootist007

  • I downloaded some albums using my iphone, i then synced it with my PC. Now all the album artwork has gone from the songs i downloaded on my iphone, but not on the itunes on the pc. How can i get the artwork back on my iphone?

    I downloaded some albums using my iphone (3GS), I then synced it with my PC. Now all the album artwork has disappeared off my iphone but not off itunes on the PC. How can I get the album artwork back onto my iphone?

    I had the similar problem last night and found a solution (although it takes more than a few clicks).  Highlight all the album tracks in itunes on the pc and right click "get info". Check the artwork box in this window.  I found that the now playing art was showing up in the itunes window, but on songs that were missing artwork showed nothing in the get info box.  When I replaced the artwork by using the artwork command, or manually adding it into the "get info" window.  It was annoying but my iphone updated every album.

  • I just bought an Iphone 5s and it I'm trying for more than an hour to charge it , but it doesn't work. What could be the reason?

    I just bought an Iphone 5s and I'm trying to charge it for more than an hour, it simply doesn't work. What could be the reason??

    ELIZ BARB wrote:
    The screen shows the apple and once in a while turns to blue.
    A couple of things to try: What to do if your iPhone or iPad will not turn on
    And: If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    If neither of these resolve the problem the phone is almost certainly broken.

  • My iPhone5 has terrible Network connection. It rarely works at the normal speed-if ever. I usually get 3G or 1x network dozens of times a day. My phone also gets pretty hot when i try to use any data for more than a few minutes.

    My iPhone5 network connection has been terrible for the past week and a half. My phone is no more than a year old so I don't see why it would be a problem with the phone. When I try to use the internet or look for apps or anything like that, anything that uses data really, it takes FOREVER if it even loads! Most of the time it won't even load. My network changes from LTE(which doesn't work well) to 3G(which works even less) and then to 1x(which basically doesn't work at all). This happens dozens of times a day. It's getting quite irritating. I've tried turning my phone off and letting it sit for a while and that does nothing. I'd really prefer NOT to restore my phone. What is the deal??!

    Are you broadcasting your SSID? Sometimes this can cause a problem connecting. Is this Cisco router running any turbo modes or special preparatory protocols.
    There are no know issues with Wi-Fi connectivity except on first connection; and the chance of 2 devices having the exact same issue is very unlikely. This sounds like something to do with your wireless router.
    Have you tried to connect to another Wi-Fi hotspot elsewhere?
    Do you have any 2.4 GHz wireless phones or security system that could interfere with connection?

  • Purchased "Moneypad app" missing in App Store. I've used that app for more than a year and all my financial records are in it. I have the backup but I need the app. How can a purchased app go missing??? Is that even legal??

    I've used "Moneypad" app to record my financial transaction for over a year and I got an update today. After updating all the icons where misplaced and there were a lot of bugs in the app. The update said "Restore original app icon". So I decided to delete it and reinstall the app but now i couldn't find the application in the itunes store both through my Macbook air and my iphone 5. What do I do now?? how can a purchased app go missing? Is it even legal to delete apurchased app from the itunes store?? What happened to my money and the worst part is my records cant be used in anyother application but "Moneypad". There were 2 version of the app in the store. One was free and the other One was paid. The free app is still there but the paid One is gone!! Please respond to this issue as soon as possible! I need it to record my daily transactions or it would mess up my work a lot! Thankyou.

    I did buy it long back! and now,I downloaded the free version and it requires me to buy it again to make it pro. and NO I dont have a copy of the application with me! I juz have the backup of the app data with me! and "
    MoneyPad√ " is the trial version. The original version which was Rs.220 in India when i got it was named "MoneyPad" without the mathematical symbol. Please is there any way i could get that application back?? I purchased the application and i've got all rights to own it! and what do you mean by "App developers can remove their apps from the store at any time"? So Can I upload some stupid app claiming to be something else and costing around $100 and delete it as soon as someone purchases it??

  • Using "in clause" for more than one collumn

    Hallo,
    for the following statement, I got the error "FEHLER in Zeile 16:
    ORA-00920: Ungultiger relationaler Operator". What is wrong on it?
    SELECT
    'ALTER TABLE ' ||
    c.owner ||
    '.' ||
    c.table_name ||
    ' MODIFY(' ||
    '"' ||
    c.column_name ||
    '"' ||
    c.data_type ||
    '(' ||
    c.data_length*1.3 ||
    FROM
    sys.dba_tab_columns c
    where (owner, table_name, column_name) in
    SELECT 'user1'||', '||'table1'||', '||'collumn3' FROM DUAL UNION ALL
    SELECT 'user2'||', '||'table17'||', '||'collumn23' FROM DUAL
    Thank you for your help!
    Paul

    ... and it does not work! :-(
    # A
    This statement works:
    SELECT
    'ALTER TABLE ' ||
    c.owner ||
    '.' ||
    c.table_name ||
    ' MODIFY(' ||
    '"' ||
    c.column_name ||
    '"' ||
    c.data_type ||
    '(' ||
    round(c.data_length*1.3) ||
    FROM
    sys.dba_tab_columns c
    where (c.owner, c.table_name, c.column_name) IN
    ('SYS', 'GV_$DB_CACHE_ADVICE', 'INST_ID')
    # B
    if I insert the following sub select, it does not work ...
    SQL> SELECT
    2 'ALTER TABLE ' ||
    3 c.owner ||
    4 '.' ||
    5 c.table_name ||
    6 ' MODIFY(' ||
    7 '"' ||
    8 c.column_name ||
    9 '"' ||
    10 c.data_type ||
    11 '(' ||
    12 round(c.data_length*1.3) ||
    13 '));'
    14 FROM
    15 sys.dba_tab_columns c
    16 where (c.owner, c.table_name, c.column_name) IN
    17 (select '('||'''SYS'||''', '''||'GV_$DB_CACHE_ADVICE'||''', '''||'INST_ID'''||')' from dual);
    (select '('||'''SYS'||''', '''||'GV_$DB_CACHE_ADVICE'||''', '''||'INST_ID'''||')' from dual)
    FEHLER in Zeile 17:
    ORA-00947: Anzahl der Werte reicht nicht aus
    # C
    the result of the sub select is the following ....
    select '('||'''SYS'||''', '''||'GV_$DB_CACHE_ADVICE'||''', '''||'INST_ID'''||')' from dual;
    ('SYS', 'GV_$DB_CACHE_ADVICE', 'INST_ID')
    Has any one an idea?
    Paul
    Sorry! I think the last reply was needless!
    Sorry for wasting your time!
    Paul
    Message was edited by:
    talloom_nagar

  • Not responding without using sony xperia c4 for more than 7 hours

    Hai, I am using Sony xperia C4 which i bought 20 days back  My problem is when i keep my phone idle(i.e not using it for more than 7 hours), and then when i press the power button back, the screen turns black and not responding too. notification lights were on, and once i force shutdown my phone ,then the phone restarts and back to normal..   and that time my battery was in 20-30%... Please reply to this issue  Thanks

    I suggest that you try to repair the phone software using PC Companion..
    Before repairing your device you may want to backup your information first. Check out this topic for more information on how to.
    How to backup?
    If the issue should still remain I think that this needs to be examined and fixed at a repair center. For more information about how to submit your phone for repair and where, contact your local support team.

  • HELP, i accidentally formatted my OSX partitions trying to install windows 8 using bootcamp

    i cant enter recovery mode (i tried using cmd+r but it gets stuck at mid bar) and my only other device in my home is a windows pc, how can i install my OSX again?? there is a way to do a bootable recovery usb in windows?? thanks in advance.
    wishing for the best
    a sad OSX user in Christmas
    PD. sorry for my english isnt my main language

    If your model is 2011 or later: Computers that can be upgraded to use OS X Internet Recovery.
    Install OS X Using Internet Recovery
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Internet Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
    Partition and Format the hard drive:
    Select Disk Utility from the main menu and click on the Continue button.
    After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Install button. Be sure to select the correct drive to use if you have more than one.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    This should restore the version of OS X originally pre-installed on the computer.

  • I am trying to get a good copy of my home video on DVD using IDVD.  On editing the video all the viewing screens show the video perfectly in HD.  When I burn the video to DVD all the end results are buzzy with squiggly lines.  Any fix?  Thanks?

    I am trying to get a good copy of my home video on DVD using IDVD.  On editing the video all the viewing screens show the video perfectly in HD.  When I burn the video to DVD all the end results are buzzy with squiggly lines.  Any fix?  Thanks?

    Hi
    There are several layers to this Q
    A. There are no HD in DVD - DVD is as standard only SD-Video what ever tools used to produce it !
    iDVD or DVD-Studio Pro or Roxio Toast™ - will only make SD-Video on DVD
    B. DVD can be better or worse
    • Using "Share to iDVD" is no good way - Better is Share to Media Browser and as Large (NOT HD as result will be worse)
    • Using iMovie'08 or 09 or 11 - are not tools to chose if highes quality is of importance - iMovie up to HD6 or FinalCut any version is far better as they send over all lines to iDVD and not only every second one.
    • Using Right encoder quality depending on movie and Manu duration is very important
    • Use of high quality brand of DVD - is important - I use Verbatim DVD-R
    • Type of DVD - DVD-R plays on more DVD-Players (even old ones)
    • Burn speed - I set it down to x4 - resulting in less burn errors - plays on more players
    • I secure a minimum of 25Gb free space on Start-Up Mac OS hard disk as iDVD and Mac OS needs this and it can not be taked from other hard disks - has to be here.
    • What You feed iDVD does matter
    Video codecs
    Audio file formats
    Photo file formats
    Yours Bengt W

  • "Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility."  Trying to format my iomega external HD for use with Mac

    Hi. Trying to connect iomega ext. HD. i have to reformat for Mac. When i plug in & go to Disk Utility,the external shows up and i'm supposed to click "partition". When i do, a box comes up saying ""Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility." I quit and relaunched, same results. After googling my question, i came up with this:
    "Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility."
    (Quitting and reopening Disk Utility does not help.)
    The following also appears in Console log:
    *** malloc[419]: Deallocation of a pointer not malloced: 0x290a410; This could be a double free(), or free() called with the middle of an allocated block; Try setting environment variable MallocHelp to see tools to help debug : for architecture i386 object: ./Applications/iTunes.app/Contents/MacOS/iTunes malformed object (unknown flavor for flavor number 0 in LC_UNIXTHREAD command 27 can't byte swap it)
    Workaround
    Quit Disk Utility.
    From the Finder's Go menu, choose Go to Folder....
    Type the following, then click OK: /Library/Receipts
    Temporarily remove these iTunes receipts from /Library/Receipts (sort the folder alphabetically as a list):
    iTunes.pkg
    iTunes4.pkg
    You can put them on the desktop, for example. Do not remove iTunesX.pkg or iTunes Phone Driver.pkg.
    Open Disk Utility and repair disk permissions again.
    Quit Disk Utility.
    Put the removed iTunes receipts back in /Library/Receipts.
    Note: This issue does not affect Disk Utility's verify or repair disk features.
    All seemed good, for a moment, until, upon going back to Disk Utility after removing itunes4.pkg and putting on desktop (i did not have itunes.pkg to remove) the same thing was happening. When i highlite my iomega ext. on left of page, disk perrmissions is grayed and does not allow me to click on it. Same problem from the start. Can somebody please help me out here? That would soooo awesome. Thanx!

    i'm just scared i will do something wrong on my own and lose my data.
    You shouldn't be scared of that, because you should already have backups. If you don't have backups, then backing up is the first priority.
    Insert the Snow Leopard DVD and restart. When you hear the chime, hold down the C key and keep holding it until the Apple logo appears on the display. You should now see the language selection screen. Select your language, then choose Utilities > Disk Utility from the menu bar. In the Disk Utility window, select the external drive (not the internal). The drive may already have a data partition, in which case there will be another icon below the drive icon. Choose the drive icon, then select the Partition tab. Create a single partition with the default options (GUID partition table, Mac OS X Extended Journaled).
    When the partitioning is done, select the startup volume on your internal drive in the DU window. Select the Restore tab. Drag the icon of the startup volume to the "Source" field. Then drag the icon of the newly-created volume on the external drive to the "Destination" field. Make sure you have this right. Then click the Restore button, and the data on your startup volume will be copied to the external drive.

Maybe you are looking for