I tried to charge my iPad Air and when I plugged it in the charge symbol would show up, but my iPad wouldn't actually hold the charge. What should I do?
I tried turning the device off and on and I even reset it. I also tried to charge it overnight but that didn't work either. I let the battery run out and I've tried charging it after but it still doesn't work. I tried four different wall sockets and tried charging with my computer with no luck. Even when the device is plugged in it won't turn on all the way. The Apple logo appears then it shuts off, but it does this repeatedly as if it forever resetting (this only happens when plugged in).
The genius at the Genius Bar ended up replacing my iPad Air with a new one. It was a quick visit which made me happy, but I wish my replacement iPad had an engraving like my original one.
Similar Messages
-
I'm trying to load everything from my phone to computer so I can reset for phone and start clean and when I plug it in the computer nothing comes up and there is a connection what going on
Is your iPhone not showing up in iTunes sidebar, or is iTunes not just launching automatically?
The things that you can check are:
1) Launch iTunes manually
2) Restart or reset your iPhone (http://support.apple.com/kb/ts3281)
3) Check your cable including disconnecting and reconnecting it on bot the phone end and the computer USB end.
4) Reboot your computer
5) As a last resort, take it to the Apple Store so they can check the hardware -
I renewed my membership for premiere pro and I still can't use the app, what should i do
I renewed my membership for premiere pro and I still can't use the app, what should i do
Hi Lara,
Lara Puharic wrote:
I renewed my membership for premiere pro and I still can't use the app, what should i do
Why can't you use it? Do you get a warning? Does the application not launch? What happens? Answering these questions will help: FAQ: What information should I provide when asking a question on this forum?
Thanks,
Kevin -
I have a ipod touch 4th gen and it wont chrage. When you plug it into the wall the lightniing bolt screen will apear but no matter how long you leave it, it will never turn on. Also it the lightning bolt screen wont even come on when you plug it into a computer (PC)..........PLease help its been like this for forever
Hi Gammer576775!
Here is an article that will help you troubleshoot this issue with your iPod touch:
iPod touch: Hardware troubleshooting
http://support.apple.com/kb/ts2771
Will not power on, or will not turn on unless connected to power
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Connect the iPod touch to an Apple USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if the display turns on and…
The home screen appears, the device should be working. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen: . Then disconnect the device from power. If it immediately turns off, seek service.
The low-battery image appears even after the iPod touch has charged for at least 20 minutes: See the "iPod touch displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or low-battery image appears , continue with this article for further troubleshooting steps.
If the iPod touch did not turn on, reset it while connected to an Apple USB power adapter. If the display turns on, go to step 4.If the display remains black, go to the next step.
Restore the device. Connect it to a computer and open iTunes. If iTunes recognizes it and indicates that it is in recovery mode, attempt to restore the iPod touch. If the device doesn't appear in iTunes or if you have difficulties in restoring it, see this article for further assistance.
If restoring the iPod touch resolved the issue, go to step 4. If restoring it did not solve the issue, seek service.
Thanks for using the Apple Support Communities!
Cheers,
Braden -
i dropped my macbook pro off my couch and when it landed it was shut, i opened it and it was on a grey sceen so i shut it down with the button and when i turned it back on it was kind of slow but not so much anymore. i quit all of my applications before i shut down and i noticed that when there are no more things t quit and i click "hide finder" its not grey anymore it still gives me the option to hide it when i dont need to, little things bug me and i just got this laptop, i just want to know if i should be worried
I suggest you immediately make a backup of your data. You don't know if or when the computer will show some symptoms from the drop. You may want to, for piece of mind, take the computer to an authorised service center for assessment. No one here can assess any internal damage you may have done.
-
I was using my iPad one morning looking at ebay, and then I locked it and came back and when I clicked the home button nothing happend. When I clicked the lock button nothing happened, when I plugged it into iTunes nothing happened and it didn't show uunder "Devices" on to side. Please help me I don't know how to fix this and it's been two days since it happened.
I would then try and do a hard reset like Fernando recomends if that doesnt work you might need to try a DFU Restore.
How To DFU Restore -
I don't have working home button, but when i try to charge my iPod 4th gen it shows an apple logo that turns on and off and it wont let me turn on my iPod! How do i fix that?
Try:
- iOS: Not responding or does not turn on
Ignore the reset and when it says place the iPod in recovery mode
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
my iPad mini keyboard is showing up but here isn't any letters or numbers ? it looks like this:
HOw do I fix this?Try reset iPad
Hold the Sleep/Wake and Home button down together until you see the Apple Logo.
Note: Data will not be affected. -
I locked my ipod then went to turn it on and nothing happened. Even when i put it into the computer nothing happens. what can i do?
Try a hard reset and go from there.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
i erased my ipod in the setting because i wanted to restore my ipod and someone told me to delete it so i did and now its just a black screen and when i put it my pc it doesntt show up what do i do plz help
Connect the iPod to a charging source and then try the will not turn on topic of:
iPod touch: Hardware troubleshooting
If you have a 2G iPod and did not have the iPod connected to a charging source it is likely that the battery fully drained before the erase was complete since it can take hours to do the delete. -
help. this screen wont turn on. its not the battery its fully charged.
Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears)
Try a different cable.
Use a wall plug. -
nothing to do with my firewall proxy laptop or version of itunes, seems to be an internet problem but clearly i am connected to the internet, HELP!!!!!!!!!!!!! thank you
That was the first thing I tried..what the site told me, but its still telling me I'm not connected to the internet when I am. Should I just delete everything by hand. Like I said I wanted to take it back and upgrade to the 80 gig ipod.
-
I have recently bought an ipond nano 5th generation. When i plug it in to my computer it shows up but it wont show up on my itunes. I would like to know how to make it show up on my itunes?
I am assuming you are using a Windows computer - iPod appears in Windows but not in iTunes
-
my iPhone 5 screen stopped working and when i plug it into the charger it vibrates. I've already tried the hold down with the sleep and home button and sill nothing.
Hi is the iPhone fully charged hold down power button & menu button keep held
down until you see Apple Logo and wait if it will not work charge for 2 hours
and try again.
if no luck take to Apple Store for testing.
bsydd uk -
hey everyone i bought an iphone 4 and it doesnt have itunes or app store on it, and when i plug it into the computer it doesnt appear on itunes plz help!!!
Are you sure this is a real iPhone 4? People in my area are trying to pass off knock off versions of the iPhone, as the real thing.
If its the real thing, then Reset your iPhone, then try again.
Maybe you are looking for
-
Mixed Media: 720p 60 + DVCPRO 50
Hi all, I've searched the forums looking to answer this question, and may have actually found the answer more than once but have now thoroughly confused myself into a corner, so I thought I should just post. What would be the best method to work with
-
How to determine prices in Resource Related Billing(RRB)
Dear Experts, I am working for service related client.in this SD,PS,HR and CO are integrated. from SD i have to create resource related billing.here while running DP91 how the system determines the resources related pricing. My doubts are: 1.Whether
-
Backspace without deleting?
Can you backspace text without deleteing the characters? Helpful when you notice you made a typo on the first letter of a long entry.
-
Is there any way to simplyfy this sql using case when or any other condition
Hi, Please ca you advise me to simplyfy the given sql SELECT CASE WHEN AxleNo=1 and AxleType = 'OFFSIDE OUTER' THEN SIZE END AS off_1st_size_txt_out, CASE WHEN AxleNo=1 and AxleType =
-
Ingration of external Appliocation with Oracle91AS Portal
Can some one help me, how can i intigrate my existing web application (which i made using servlets and it is password protected too.) with the use of Oracle91AS Portal. Thanks