I tried to down load and I get a message saying my operating system is no longer supported by Photos
I tried to download and got a message that Photoshop nolonger supports my operating system
And what OS would that be?
Similar Messages
-
I have recently upgraded to OSX 10.8.2 and now find that I cannot operate my scanner, an hp psc 1310 series printer/scanner. I get a message saying that Power PC is no longer supported. I am still able to print on the same device. What should I do?
Hi,
PSC 1315 no longer supported for scanning since Mac OS X v10.5 or while using any newer OS, there is no scan software provided by either HP or Apple (Image Capture)
You may find this information stated below for Leopard, the same apply for any newer OS version:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01234231&cc=us&dlc=en&lc=en &os=219&product=374568&sw_lang=
Image capture will not recognize your device as well, only print is supported as you may find listed for teh PSC 1310 Series below:
http://support.apple.com/kb/HT3669#HP
Although there is no official scanning support for your device you may still try the 3rd party VueScan software which list your scanner as supported and compatible with Mountain Lion:
http://www.hamrick.com/vuescan/hp_psc_1310.html
Shlomi -
Everytime I try to download iTunes I get this error message saying, "This Installation package could not be opened. Verify that the package exists and that you can access it.or contact the vendor to verify that this is a valid windows Installer package.
I had this same issue occur today during update, searched and finally tracked to problem with windows registry. Used online version of windows registry tool "Fix It" (can also download portable version for offline check. I selected Apple updater utility from list to fix and it did it's thing. Returned to my downloaded 10 iTunes adn isntalled perfectly fine.
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Good luck. Worked for me back up and running. -
When I tried to download an update, the following message occurred "The operation couldn’t be completed. (NSURLErrorDomain error -3001.)(102)". What is this? How can I complete the update?
“Not Found
The requested URL /content/downloads/53/02/041-8081/2jwp4wjrwygtm4lc608qy4h0 n4a9yyq37g/Safari6.0.2Mountain.pkg was not found on this server.“ -
Itunes updates now it says MSVCR80.dll was not found? I have tried to reinstall itunes and keep getting this message?
Hello emeraldhopes,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Best of luck,
Mario -
When I started my iMac today, it started beeping like an alarm horn. I shut it down, and held the startup button a little longer to get it to start. Shortly after starting up, a dark 'film' slowly comes down over the screen and I get a message saying I have to shut down the computer. I've tried to start from the disk, and before I can even run a repair off utilities, it happens again. What's up? Am I screwed? HELP!!
What you are seeing is a kernel panic, often but not always connected with a hardware or peripheral issue, so, unplug everything except mouse and keyboard, reboot and hold the shift key as soon as your hear the chime, continue holding it until you see the Apple Icon and spinning progress indicator, then post back.
It will take noticeably longer than normal to start. -
I updated the Itunes on my computer and it begin having problems. I tryed a new installation and there is a message saying an application has made an attempt to load C runtime library incorrectly. What shoul I do?
Hello rvalle3,
The following article can help get iTunes updated and running again.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Allen -
I am trying to install CS3 on Windows 8 and keep getting a message saying "the serial number I entered is not valid please enter it again" Does anyone know how to install successfully on Windows 8?
CS3 is unsupported under Windows 8. That said, you'll need to contact Adobe
directly for serial number issues. -
i am trying to download itunes and i get this message: service apple mobile device failed to start. verify that you have suffient privileges to start system services. what do i have to do?
Hi txatxo
Thanks for using Apple Support Communities. You may need to restart the Apple Mobile Device Service. This article has instructions for doing this:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
If that doesn't resolve the issue, I would recommend trying a thorough uninstall and reinstall of iTunes as described here:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Cheers,
- Ari -
I am trying to download EndNoteX4 but keep getting the message 'no mountable file systems'. What does this mean and how do fix it?
jenitsallgood wrote:
I am really unsure as to what I am doing wrong.
Maybe you are doing nothing wrong and the problem is with the disk.
Use SuperDuper or CarbonCopy Cloner
to clone your system to an external drive.
Then boot from your DVD go to Disk Utility and choose your entire drive > top icon in DIsk Utility.
Go to Erase tab. Choose format: Mac OS Extended (Journaled). Click on erase. Now, install Lion and when you get to setup assistant choose to migrate from your external drive.
This is slightly different than baltwo described and slighly longer but if there is any corruption on your disk a more through way to go, IMO.
What baltwo is saying is to clone your volume over to an external hard drive with CCC reformat and clone it back. This will defragment the files and make them all contiguous but will not address any directory problems.
Your choice. You can do it one way, then the other if it doesn't work out for you. -
im trying to install and i get a message saying
"an error occured during the installation of assembly 'Microsoft. VC80.CRT,type="win32",version="8.0.50727.6195",publicKeyToken="1fc8b3b9a1e18e3b ",processorArchitecture="x86"" . Please refer to Help and Support for more infomation. HRESULT: 0x800736B3These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.) -
Trying to download Itunes and am getting error messages 7 and R6034
Trying to download Itunes and am getting error messages 7 and R6034?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
My HP 3054 printer/scanner worked very well for my needs, but today I tried to scan something and I get this message:(com.apple.ImageCaptureCore error -9922.) What does this mean and what can I do to get my scanner to work again?
i have this too on my hp photosmart b210
no one seems to know how to fix it!! -
I still am having problems with Aperture not loading, It just refuses to work, and I get the message saying it has encountered a problem, and I may need to re-install which I have done dozens of times. The fix mentioned on an earlier post doesn't work as it is for Ver 10.6.6 and I am running 10.6.7
Do you have Final Cut installed on your machine?
If so, you may want to look at this article: http://support.apple.com/kb/TS3528
Let us know if that helps. -
When trying got save a document I get a message saying "can't open untitled.page" and it doesn't save or if it does i can't open it. why.
I think I found out how to solve this - I turned off iCloud documents and data, and now I can save and don't get the "can't open untitled.page" and am now able to properly save!
Hope it works for you.
Maybe you are looking for
-
How to create text vertically in ADOBE FORMS?
Hi all, I need to create text in vertical position in ADOBE FORMS? How to do this.. << Removed >> Thanks Devinder Edited by: Rob Burbank on Mar 3, 2010 1:40 PM
-
Digital Signatures and SharePoint Workflow
Hello, We are trying to combine .pdf documents (created in Acrobat 9 pro) requiring a series of digital signatures with a workflow process in MS SharePoint 2007. If a Word document is used, each person in the workflow process can open the document o
-
Files an folders have wrong user rights on OS X Server with 10.5.6
Hi there, since updating to 10.5.6 we have a strange behaviour in our network. All Leopard clients are not able to search on our network volumes (OS X Server 10.4.11). The user rights are owner: admin; everyone: read only All groups and users which a
-
Exchange creates a new logs even no mailbox uses the storage group
We are running Exchange 2007 with 4 storage groups. We have migrated most of our mailboxes to Office 365 (there two web emails need to configure SMTP relay on Office 365) and stopped Exchange backup. However, the Exchange data still increases everyda
-
I am trying to create a multi provider ? how to optimize my query performan
hi, I am trying to creating a multi provider using four ods ? can anyone let me know how to optimize my query performance. Since my query takes a lot of time to get executed. If anyone has any docs for query optimization that is built based on multi