I tried to download Mavericks overnight and it never finished. When I tried to download again I got this message "We could not complete your purchase.The product distribution file could not be verified. It may be damaged or was not signed." Help?
I tried to re-download Mavericks after an apparent failed attempt and now I get the message "We could not complete your purchase. The product distribution file could not be verified. It may be damaged or was not signed."
Can anybody help?
Several causes for this problem have been reported. Please take each of the following steps that you haven't already tried. Stop when it's resolved.
Step 1
Back up all data.
From the menu bar, select
▹ System Preferences... ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If any proxy options are selected, make a note of them and then deselect them. You don’t need to change the bypass or FTP settings. Click OK and then Apply. Test. The result may be that you can't connect to any web server. Restore the previous settings if that happens.
Step 2
Rebuild the Spotlight index. If you try to search now from the magnifying-glass icon in the top right corner of the display, there will be an indication that indexing is in progress.
Step 3
Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.
Similar Messages
-
When I click on free upgrade to Mavericks it says 'we could not complete your purchase, The product distribution file could not be verified. It may be damaged or was not signed.' What should I do? Thanks
Several causes for this problem have been reported. Please take each of the following steps that you haven't already tried. Stop when it's resolved.
Step 1
If possible, test on another network, such as a public hotspot (if the computer is portable) or the hotspot created by a mobile device. A network gateway that blocks some traffic, most likely on a company or university network, could be causing the error.
Step 2
Back up all data.
From the menu bar, select
▹ System Preferences... ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If any proxy options are selected, make a note of them and then deselect them. You don’t need to change the bypass or FTP settings. Click OK and then Apply. Test. The result may be that you can't connect to any web server. Restore the previous settings if that happens.
Step 3
Rebuild the Spotlight index. If you try to search now from the magnifying-glass icon in the top right corner of the display, there will be an indication that indexing is in progress.
Step 4
Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
Already purchase and sign. Lost internet data...aaaahh... .error - "We could not complete your purchase.The product distribution file could not be verified. It may be damaged or was not signed".
Update: i spoke to a very knowledgeable applecare representitive who walked me thrue the process, we were trying to figure out what exactly was preventing Mountain Lion from installing & (after a process of elimination) it turns out you need to be log in as an Admin to download it, we also made sure everything was up-to-date. Downloading Mountain Lion took about 40 minutes (with roadrunner high speed internet, DSL might be a bit slower) once it was downloaded the installation process was very intuititive with just a few clicks and about 35 minutes i had the latest Operating System.
-
when ever i'm tring to install an app from the app store i'm getting the following error.
"We could not complete your purchase - The product distribution file could not be verified. It may be damaged or was not signed".
someone plz help me to overcome this.Installing the appropriate combo update may help...
If you are running v10..7 Lion, install the OS X Lion Update 10.7.4 (Client Combo)
For 10.6 Snow Leopard > Mac OS X 10.6.8 Update Combo
Then restart your Mac. Try the App Store.
If that doesn't help, try the following..
Quit the App Store if it's open.
Open the Finder. From the Finder menu bar top of your screen click Go > Go to Folder
Type this exactly as you see it here:
/Library/Preferences/SystemConfiguration
Click Go
Move the NetworkInterfaces.plist file from the SystemConfiguration folder to the Trash.
Relaunch the App Store and try downloading Mountain Lion.
You may also need to disable anti virus software and turn off the Firewall in System Preferences > Security (or Security & Privacy) > Firewall -
I have a 2013 iMac, with OS X version 10.8.5. Have been trying to download OS X version 10.9 (OS X Mavericks) without success; error message "we could not complete your purchase, the product distribution file could not be verified, etc". Please help; TQ
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
I can `t buy OS X Mountain. A game can buy. When I click on the Buy Now button, this message appears: We could not complete your purchase, the product distribution file could not be scanned. It may be damaged or not signed. I have macbook air 11-inch Mid 2011.
Quit the App Store if it's open.
Open the Finder. From the Finder menu bar top of your screen click Go > Go to Folder
Type or copy / paste: /Library/Preferences/SystemConfiguration
Click Go then move the NetworkInterfaces.plist file from the SystemConfiguration folder to the Trash.
Relaunch the App Store. Try purchasing Mountain Lion. -
When I want to buy Mountain Lion I get the following message
The product distribution file could not be verified. It may be damaged or was not signed.
I have a MacBook Pro 15" from mid 2010 with OS X 10.7.4
I have already reinstalled Combo 10.7.4 but that did not bring any change
Does any one have an other greate idea?
Thanks in advance for your help
Renerenefromhannover wrote:
Hello to everyone that helped me.
I have tryed all the solutions that you have offered, but with no sucsess.
I have also tryed to contact the support from the AppStore, but I only got the answer please contact our other collegues, from the Technical Support unit.
I tryed as the last atemped to reinstall Lion 10.7 through the AppStore (by going to purchases) after I went through the process, downloading and installing, I could also purchase, download and install Mountainlion.
(one small hick-up, after I finished downloading Lion, the AppStore gave me the same Message as before:
The product distribution file could not be verified. It may be damaged or was not signed.
I just pressed the button to download, again. After that I had no more issues.)
I hope that this will help you.
Best Regards
Rene
Hello,
In my case, that would not be possible since before the message I have got , the system said
"We could not complete your App Store request" or something similar. And the only choice I had, is to click on OK button. As I said, the only way I found is to start from Mac OS 10.6 to succeed in buying, not only downloading, but simply buying Mountain Lion.
Best Regards from France -
Hi folks,
I tried downloading the latest OS X Mountain Lion and [after a long time... I have a slow connection] I got an error message ... We could not complete your purchase The product distribution file could not be verified. It may be damaged or was not signed.
Everytime I retry or continue the download I just keep getting the same error message!!!
What can I do to get my product?
PMThe only thing that worked for me was to boot in safe mode.
Power down. Then press power button and hold 'shift' key until grey screen with progress bar appears... Once booted and logged in just open safari and browse to applestore.
No trouble at all once I did this.
Reminder: create full backup before you upgrade OS
Hope it helps. -
I have tried to re-install Lion, delete different cach folders, etc., nothing is working - I keep getting the same message:
We could not complete your purchase
The product distribution file could not be verified. It may be damaged or was not signed.
Please can anyone be of kind assistance.
Thank you!
Zanjan FromerI have tried to re-install Lion
If you are trying to reinstall Lion, you need to use Lion Recovery
Why can't I purchase and download Mountain Lion? I get the following message: The product distribution file could not be verified. It may be damaged or was not signed.
For that issue, quit the App Store if it's open.
Open the Finder. From the Finder menu bar top of your screen click Go > Go to Folder
Type this exactly as you see it here:
/Library/Preferences/SystemConfiguration
Click Go
Move the NetworkInterfaces.plist file from the SystemConfiguration folder to the Trash.
Relaunch the App Store and try downloading MLion.
***** Your post is rather confusing. There's a difference between reinstalling Lion and downloading Mountain Lion. -
"The product distribution file could not be verified. It may be damaged or was not signed."
please help! i want to update my computer!!!"Update your new MacBook Pro"?
Well, if your MacBook Pro is new, it already has Mavericks installed and there is nothing to update.
Go to the Menu Bar, and click the Apple logo. Then click "About This Mac." Does it show OS X 10.9 or 10.9.1?
If so you are already running Mavericks. -
please help me coz i'm anew mac user and i don't have much knowledge about mac system
how can i skip his error ( The product distribution file could not be verified. It may be damaged or was not signe )
because it's driving me crazy -
download failed due to internet problems. I can't restart the download again and receive the following message: The product distribution file could not be verified. It may be damaged or was not signed. please help thanks
I went to Purchases and it worked from there having had the same problem you describe.
-
I try to download the OS X Mountain Lion, and I keep getting an error saying, "The product distribution file could not be verified. It may be damaged or was not signed." Please Help!
If you have Intego VirusBarrier X6 installed
1. Open /Applications/VirusBarrier X6.
2. Click on the "Surf" button.
3. Click on the "Ad Banner Filter" tab.
4. Click "OFF" next to "Banner advertisement filter".
5. Start the computer in Safe Boot, then restart the computer into normal mode.
If don't not have Intego Virus Barrier installed
1. Verify that the date and time is correct on the computer.
2. Safe Boot once, then restart normally, then try downloading again.
3. Try with a different user account if the issue persists
If the issue persists
Install Lion onto an empty partition (internal or external).
Note: You can Use Disk Utility to live partition the internal drive and create a second partition large enough to install Lion.
Start from the clean installation of Lion.
Download Mountain Lion from the Mac App Store. Note that the original startup disk can be set as the destination for Mountain Lion during the installation process. -
I am using Mac OS X 10.7.5 as of now and when I am trying to upgrade to Mavericks, the App Store is throwing error "The product distribution file could not be verified. It may be damaged or not signed".
Is there anything I should do differently? Is anyone else facing the same issue?
Kindly help.Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click anywhere in the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; crontab -l 2> /dev/null; } | open -ef
Step 4
ls -A /e*/{cr,la,mach}* {,/}Lib*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of login items' | open -ef
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal. -
I'm trying to download the new MacOS. I keep getting a dialog that says: "We could not complete your purchase" and then " The product distribution file could not be verified. It may be damaged or was not signed." any ideas?
I went to Purchases and it worked from there having had the same problem you describe.
Maybe you are looking for
-
My old PC crashed and I ended up buying a new one. I was able to recover all my music from the old hard drive and restore it in itunes. I purchased a new album online thru itunes and added it to my library. When I tried to add the album to my 6th
-
Music from music library will no longer sync with my Apple TV
purcheased Applet TV a few months ago and set it up to play our music from our Mac Pro. Everything was wonderful, but for no reason it will no longer play our music? Have rebooted computer. Have signed out and signed back in to Apple TV. Still no
-
Printing problems on Server 2008R2 - Server 2012R2
Hi, We have troubles with Firefox and printing pages. First i want to say i have already tried all this steps: https://support.mozilla.org/en-US/kb/fix-printing-problems-firefox Let me explain my problem: In a TerminalServer Session i want to print a
-
Business Place is not coming on Tax G/L line items
Hi, I want Business Place in business place Field in line item in Tax G/L a/c at the time executing Tcodes-FBL3N and FS10N.Presently this field comes blank except in one plant out of 10. what r the settings required for this. Please suggest Thanks
-
I bought a new macbook pro a few days ago, and I have some games that I want to play on it that require classic. I have an older g3(originally 10.2.8, now 10.4) with classic on it. I read on another topic that you can simply transfer the classic syst