I tried to download video from RCA Small Wonder EZ201 to my new macbook pro. Macbook pro recognizes the device but then message appears that device was improperly ejected when it is still connected. How can I download these videos?
When I connect the RCA Small Wonder to my MacBook Pro, the device is recognized in finder as EZ201. I tried to copy the video files in the folder but within a minute or two, I receive a message that the disk was ejected improperly, even though the device is still connected. I was able to download the first few videos before it stopped working and was able to play them using Perian. However, when I tried to connect the device again, it froze my system and I had to force a shut down by turning the computer off. Why is the device initially recongized but then shows as improperly ejected when it is still connected? How can I download the videos if the MacBook Pro won't allow the device to stay connected?
A picture of a screen that suggests my new MBP Retina never connects to the "Macbook Pro backup ("StefanTimeCapsule")
This is the one that has the files for the backups procured by the Time Machine program. But it can't "connect"-- You 'll see int he sideways pic (sorry!) that the options STILL says "connecting"
Do i have to make these Time Machines more open to connection?
Similar Messages
-
I purchased a macbook pro online this fall and had iWork and iLife apps pre-installed when I purchased it. How can I get these Apps onto my iPhone 4s without paying for it again?
On my iphone those apps still require me to purchase them.The MacBook versions run on a Different Operating System...
You will need to Purchase the iOS iPhone versions -
i put my new iPhone into iTunes for the first time, and chose to back it up to the iTunes i had on my iPod, but that made all my contacts on my sim card disappear, how can i get these contacts back?
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer -
I am trying to upload a pdf i created to an online system but am getting an error message indicating that my document is not formatted to 8.5x11. How can i get my document to 8.5x11
You'll want to fix this via the online system you used to create the PDF.
If all content mastering and page configuration is done online then that is where you must make a correction to what you did before.
If a file is uploaded to the online system for processing then you must revisit that file.
Open the file with its native application and correct page size there.
If you upload a scanned image to the online system you must configure the scanner software to output the needed page size.
Be well... -
I took out a trial of Fireworks CS6, but for some reason a .dll file has been deleted off my computer. How can I download the program again?
Hello
you could have a look there Download CS6 products
Hans-Günter -
I have CC 2014 but need AME CC (pre 2014) in order to deliver FLV and F4V outputs - how can I download CC AME with FLV support?
You can install AME CC (7.2) by installing After Effects CC (12.2) through the Creative Cloud application.
-
I can 'see' my wireless printer but my iMac believes it is low on loner when it is not. How can I clear this condition?
Remove the toner cartridge and gently shake it from side to side while holding it level (in the position it is in while in the printer). Re-insert the cartridge, restart (power cycle) the printer. Then restart the Mac and test.
-
I downloaded latest software on iphone 4 and installed new software on my imac (snow leopard 8.6)and now phone not synching with new itunes. Itunes does recognize the phone but the itunes is totally different now. It doesn't look anything like the previous vesions. I can't even find a tab for synching. very strange. any help is appriciated.
iTunes 10.7 is compatible with Snow Leopard.
You can download it here: http://www.apple.com/itunes/ -
I am getting this message: Service Apple Mobile Device failed to start, verify that you have sufficient privileges to start system services. How can I fix this?
Hello hurleygirl63,
Thank you for the details of the issue you are experiencing with iTunes. I recommend following the steps in the article below:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
Thank you for using Apple Support Communities.
Best,
Sheila M. -
my ipod touch just shows the charge symbol on the screen and i checked whether there is a problem in the charger but it works perfectly on my iphone 4 and when my ipod is connected to the computer itunes is not recognising my device pls help me
tmplHi pranoop,
If you are having an issue with your iPod touch not being recognized by iTunes when connected to your Windows computer, I would suggest that you troubleshoot using the steps in this article -
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
Thanks for using Apple Support Communities.
Sincerely,
Brett L -
iCal keeps sending email notifications of all agenda items from the last 2 years (then I bought my laptop). After laptop start up this action is repeated every hour. How can I stop these >300 emails coming in every hour?
Hi,
We have rolled out a fix for this issue.
Please log off and log back in to your machine and the issue should be resolved automatically. In case that does not work, please manually run the msi installer posted here (may require reboot).
For details, please refer to the KB article here: Multiple RunOnce keys created 11.0.10 and 10.1.13 Acrobat | Reader
Please let us know if you still face any issues.
Thanks,
Ashu Mittal -
Can I transfer money to other accounts on my iPad with iOS 5.1.1? I created another account and put an iTunes gift card on it, but then I realized that all of my apps ere on another account, so when I recovered the password of my previous account, I had money on an account that I do not want to use. Can I transfer the money over?
Not on your own. Click here and ask the iTunes Store staff to put it back onto the card; they'll only do this if none of the balance has been spent.
(115868) -
Need to update my IPhone 4 and connected to the itunes on windows XP. I clicked on update and waited. A message appears that says," Cannot update etc. Please check your network settings/config., etc... or try again later" and it's been happening for a while. Please help.
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
I sometimes get Error 42 when opening a TCP connection - how can I fix this ?
In my Labview application I am opening a TCP connection in an identical way to the Data Client example. I am using a direct connection to external equipment using an ethernet crossover cable. The error occurs on at least 2 different PCs.
The error can occur regardless of whether anything is connected to the ethernet port of the PC.
The only way I have found to clear the error is to power down the PC and restart with a connection to the office LAN. Then I can swap back to the crossover cable and talk to the remote equipment once again, ...unitl the next time the error occurs.
I have LabView 6.0 running on Win98.
Any help greatly appreciated.Jeremy,
Thanks for taking the time to answer
I already checked the link you suggested but I am connecting to my remote instrument with a 2m cross-over cable.
I Have looked into this a little further, it seems the sequence of events is as follows -
1. After some hours the connection gets lost.
2. TCP Read returns error 66 - Connection was closed by peer.
3. If I try to restart my program I get Error 42 at TCP open Connection.
4. Rebooting the PC doesn't clear the error 42 problem.
5. If I try to PING my instument I get "Host unreachable".
6. I have to "refresh" my network card by connecting to our LAN and either opening a file on another PC or simply sending a PING to another PC.
6. I can then reconnect my remote instrument via cross-over cable
and we're up and running for another few hours.
I get the same problem on two different PCs with different NICs and different OS (Win98 and WinME)
I am assuming that because a reboot has no effect that its not a memory allocation problem.
It seems like LabView stops talking to the NIC and then gets locked out some how.
Any other tips ? -
I have bought it a long time ago,but least week i have reestore my ipod,and i lost it,can i download it again?
And have also my brother iphone,wich one i have tryed to donwload the Where is my water?, Crankys Story and the app keep alert me to pay it again,i have never continue,because i dont whant to pay it again.What shuld i do to download it in his Iphone?yes u can.
goto app store
Updates tab
Purchase
scroll up
search "Where's my perry" or wtevr app
or u could just goto the Search tab and do it that way as well.
u can install it from searching the app and searching it throu ur icloud, doesnt matter what path u choose. once u buy it, u buy it with that itunes account and its free to reinstall it.
u will not get charge twice installing the same app and the apps that have adds on u can remove withn app purchase.
for eq.
remove ads once from Graffitti Ball. remove the app and reinstall it u will get adds again. goto remove the ads again, it will ask u are u sure to purchase remove ads, selct yes, it will look into ur itunes account for adfree graffiti ball and it will say u recently payed for remove ads, would u like to install it, select yes, no charges made, the ads are removed
Message was edited by: James5wins
Maybe you are looking for
-
OnSelect event for a Drop down UI Element in Webdynpro ABAP Select Options
Hi Experts We have built our UI based on the webdynpro ABAP Select Options. We have a requirement that, when we change the value of a drop down box in the UI, I need to hide some fields. Can anybody help me out in handling of OnSelect event of a drop
-
Windows reports that the "USB-IF xHCI USB Host Controller" device is not working properly.
I have been receiving the following error and instructions to fix it for a long time now, prior to updating to Windows 8.1: A device is not working properly Windows reports that the "USB-IF xHCI USB Host Controller" device is not working properly. R
-
How does one set databse parameters in Tomcat to run a servlet?
Hi, I am trying to run a applet-servlet code, downloaded from the web. According to the installation instructions, the following is stated: Database Parameters. You can provide different database parameters to the servlet. These parameters are set du
-
Set Hierarchy for 0GL_ACCOUNT with BW07
Hello everybody, during the action of the replication of GL_ACCOUNT hierarchy, emerged the problem that GL_ACCOUNT have in compound 0CHRT_ACCTS but it is not correctly mapped. As a result before mentioned problem, the system is signaling the error in
-
Tecra 8100 only boot up in safe mode
I seem to have lost the display drivers to my Tecra 8100. Since I attempted to use an extra screen which worked fine until I came to boot up the following day when it would only boot up in Safe Mode. What have I done wrong and how can I rectify it? D