I tried to export photos from iMac to iPad using a USB flash drive. The photos are on the drive but when I plug it into the iPad, the iPad says the device requires too much power. Any ideas of what type of USB flash drive I should use?
I tried to export photos from iMac to iPad using a USB flash drive. The photos are on the drive but when I plug it into the iPad, the iPad says the device requires too much power. Any ideas of what type of USB flash drive I should use?
You can transfer photos outside of iTunes. I do it all the time. THat said, i have a 50/50 success rate with them. I'd avoid sandisk and kingston, their bundled software triggers the 'too much power' warning.
I've had mixed luck with lexar, some work, some don't.
I did have good luck with an older 4 gig geek squad one.
Look for drives without software on them, without bright LED lights and I haven't gotten any larger than 4 gig to work, but that may just be me.
For a less troublesome way? h onestly, I use a SD card that I've formatted with the DCIM folder. I've never had one of them trigger the 'too much power' warning. Just make sure they're not SDXC. those don't work.
Similar Messages
-
When I try to download my pics from my camera with the iPad connection kit, I get a message saying that my device requires too much power.
What model iPad? I upgraded my mini and used the SD card lightning cable last night to transfer raw photo images without any problem.
-
IPad Air - The connected device requires too much power.
When connecting my iDJ Live II to my new iPad Air I receive the following message:
Cannot Use Device
Numark iDJ Live II: The connected device requires too much power.
The iPad Air is running iOS 7.0.4, I also have an iPhone 5S, iPad Mini and iPad 2 all running latest iOS 7.0.4 and this dj controller runs on all these models. I know about the 20mA output limit on these other devices but they all still work why not the iPad Air? What has changed?
I am very disappointed with this restriction as the only reason I bought the iPad Air was for the better processing power and 128gb storage to fit all my music on there to use this dj controller with djay 2 and vjay. Now I have spent $900 on something I can not use as intended.
Please any help would be appreciated.
Thanks
AdamTry giving your iPad a reset. See if it can clear up the error or if it repeats. Hold down the sleep and home keys until it reboots then try again.
How does this device plug in? Via the lightning connector or the USB part of the camera kit? If it's USB then sometimes a powered USB hub can help with the power issues.
If it's lightning then the issue could be related to something that came with iOS7. Due to so many unauthorized lightning cables, iOS7 activated software that looks for a code broadcast by the chip in the lightning connector. Authorized manufacturers have codes that the software sees, unauthorized ones don't. Usually people using unauthorized cables get a specific message, however it could be possible that this new part of the software is affecting other things connected to the lightning port.
Have you looked on djay's site to see if others are having issues or if they have fixes? -
Cannot use device IOUSB Device: The connected device requires too much power.
Cannot use device
IOUSB Device: The connected device requires too much power.
This is the message I get when connecting a camera on binoculars to ipad. Is there a work around the camera will also load to a SD cardThere are a few options:
1. If your camera supports it, you can try a low power mode, or picture transfer mode so it does not attempt to charge from the iPad. some cameras have this.
2. You can add a powered USB hub between the iPad and the camera, so the camera uses the usb hub's power instead of trying to charge from the iPad.
3. You can get the SD card reader and read the photos direcltly off of the card instead of through the camera.
Depending on model of iPad:
http://store.apple.com/us/product/MC531ZM/A/apple-ipad-camera-connection-kit
or
http://store.apple.com/us/product/MD822ZM/A/lightning-to-sd-card-camera-reader -
Error appeared when I connected my camera to iPad I used a camera connection device error cannot use device t he connected USB device requires too much power
Thanking you
Wendy BanksSome cameras are designed to use the power suppled via USB when they're plugged into another device, usually a PC or laptop. The iPad does not supply sufficient power for a camera. The iPad Camera kit allows for either a camera to be plugged in only for the transfer of photos, not as a power sourse, or the removal of the SD Card from a camera so it can transfer photos as an alternative.
-
IPad mini retina - The connected device requires too much power.
Hi,
I just bought the IDJ Live 2 Controller on 6 march 2014.
when I connect the lightning cable to the ipad and idj live 2, it shows me an error.
Unable to use the device: The connected device requires too much power.
i use the original cable from numark idj, my configuration is:
ipad mini retina ios 7.0.6 - idj live 2.
I tried with iPhone 4, it works well. (same ios)
I also have a sd card lighting adapter and it works on the iPad mini retina.
Currently it is not possible to power the lightining cable..
maybe in future, will Apple increase the output current through new ios?No, because the other end of the lighining cable has a mini usb (type b) connector.
-
I tried to use lightning to usb camera adapter but every time I plug it into my ipad mine it give cannot use device. the connected usb device requires too much power. how could I use this attachment.
Or use the camera's SD card instead.
Cheers, Tom -
HT4101 the connected device requires too much power
using the Lightning to usb camera adapter, when i connected to my camera. i recive the the following message:
can't connect. the connected device requires too much power.
my camera is sonyMake sure you connect your camera to the iPad before you turn on the iPad.
-
HT4101 What does it mean when it says that the USB device requires too much power?
What does it mean when it says that the USB device requires too much power, when using the ipad lightening pin camera connection kit?
Just that. The iPad allocates a certain amount of power to that port. If the device you're trying to plug in wants more than the iPad is willing to give, it'll trigger that warning.
If it's something that you just must hook up you can try using a powered USB hub, but results are mixed at best.
What are you trying to hook to your iPad? -
Using an older, second-issue iPad, I can download images into it from my camera. I cannot move them out of the iPad into a thumb drive. The message I receive is that the thumb drives require too much energy to make the transfer. What can I do?
Thats how its designed. in order to export your images or videos, the best method might be by connecting the iPad to your computer, or directly to the thumb drive connected to your computer, not to the iPad. Then is as simple as drag and drop. The other method could be sending them by email or uploading via a cloud service but that will take more time do get it done.
Hope this helps.
Alex -
Is there a way around this?
She has to be using some version of the camera connection kit doesn't she? Only way to get a card reader plugged into an iPad.
if the cards are SD cards, then plugging them directly iinto the camera connection kit is the best way. If they're not SD cards, then you can use the USB attachment to plug your camera directly into the iPad.
If you're using a device beyond the camera or an SD card, some have reported success using a powered USB hub to allow plugging hte camera connection kit to other card readers.
Basically, the USB out of the iPad only puts out a limited amount of power. About a year ago, it put out more and people could plug in card readers and keyboards and even mice, but Apple changed the power configuration so now most things do not work. -
I'm not an app developer, but I'm wondering if there is an app that enable's USB devices connected via the camera USB and using the most current iOS 5.0 to use USB devices that draw on the iPad's power. I'm making reference to some USB microphones such as Blue Yeti that have suggested that to get a Blue Yeti working one hasto downgrade to iOS 3.2.2?
I'm thinking, can Apple or someone make this app so the user may think, "okay I want more power now to record something", and the user can turn up the power and when they've done recording, go to the app, turn down the power when the USB device is not in use [by turning down the power via the app].
Of course with the App, Apple or the developer may state that using the USB Charge Changer radically reduces the charge of the device. It'll keep a LOT of musicians and creative types very happy. I hope with Apple's blessing they'll consider this.
Hey, I'll pay 5 bucks to get this app!No, third-party apps cannot change the power drawn by USB devices. Such a change would have to come from Apple in an IOS update.
Send feedback directly to Apple about this here: http://www.apple.com/feedback/ipad.html -
HT4101 Cannot use device. The connected USB device requires too much power.
I am trying to connect the Nikon cool pix to my IPad 3rd gen through the iPad connection kit via USB. The title of this is the error I get on the iPad screen. Anyone else have this issue or know of a solution?
Thank you for the help! I am going to get one and give it a shot.
Did this fix also work with memory sticks for USB upoads? I want to transfer music and files from my computer to my GF's iPad. -
Has anyone a solution to my newly purchased lightning to USB camera adapter not connecting my Sony Cybershot DSC-W730 to my new ipad Air? It says the connected device requires too much power.
Use the camera's SD card.
Cheers, Tom -
When I connect my camera to my iPad I get a requires too much power error message
I keep getting a "usb device requires too much power" error when I connect my external camera to my iPad.
Doing a search on here it looks like other people have the same problem with Sony cybershot cameras. If you have a card reader which doesn't draw too much power then you could try using that with the USB part of the kit.
Maybe you are looking for
-
Any insight on how to achieve this will be very welcome.
-
Redirect to two separate pages in the same cfform
I'm a bit of a novice at this.Hoping someone can guide me on how to accomplish this. I have a simple selection list (below). If they user chooses the selection in red I want it to redirect them to a page other than the one in the cfform tag, but I ca
-
Hi Guru's, Can any 1 tell me what is debit memo request, credit memo request & returns in sales documents ??? Thanks, Danish
-
My battery reads that it is 100% charged. However, as soon as I unplug it, it dies instantly. The battery lights are still functional, and everything else is working fine! What's wrong with my battery?
-
Can't publish movie; get an error code
I get an error message in imovie that says, "unable to publish project error code= -2009. What does this mean?