I tried to install 7.0.6, but the screen froze. Help?

When I opened my iPad mini w/ Retina Display, it notified me about the 7.0.6 update. I immediatley installed it. A progress bar appeared and it succesfully loaded in about a few minutes. On the second one, it looked like 1% of it loaded. I waited a few minutes and it stood there, at 1%. It just froze, and I don't know what happened. Could someone help me?

Try this and see how it behaves if and when it restarts.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Similar Messages

TS1702 I tried to download a free game but the screen froze how can I unfreeze it

I have just purchased an iphone 4 & I tried to download a free game but the screen has frozen. Please can anyone help me to unfreeze the screen.

Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414

I tried to install ios7 last night and the screen is now on itunes with the usb symbols Plugged the ipod into the laptop where itunes is stored. Tried to restore only to be advised that a 3194 error has occured cannot get any further please help!!

Hi I tried to install ios7 last night and the ipod touch now has a frozen screen with the itunes logo and the usb logo I plugged the ipod into my laptop and tried to restore only to be met with the message 3194 error cannot restore this ipod please help thanks

Hi. The two user tips both describe a sequence of steps that should get your library from the point where it threatens to wipe data from your device to where it is syncing normally, while recovering as much information as possible. It may still be necessary to wipe and reload the device but this should only take place once all the data that can be recovered has been recovered.
Doing step 1 of 8 and then complaining things aren't the way you want them to be yet strikes me as premature...
Since you appear to have all your media content, and we are discussing an iPod classic, not an iOS device, the main worries are already taken care of. What's left is ratings, playcounts, playlist membership and checked status. Since your device holds only part of your library at best you could only recover the missing data for the content that is on the device using third party tools.
Recreating the previous checked/unchecked status of every track in your library from where you are now may not be that easy. Syncing with selected playlists has many advantages, one of which would have been that you would have a named playlist that could have been retrieved by 3rd party software if you had used this method.
You haven't explained what caused your problem in the first place, but if you have a Previous iTunes Libraries folder holding old copies of your iTunes database (generated with each iTunes update) then it would be possible to restore the most recent of these and then update the library with any changes in your media folder.
BTW Apple doesn't offer free support for this kind of issue with iTunes.
tt2

TS1702 I am trying to download and app but the screen froze at the end where it said ready to download and I was required to press OK

I am trying to download an app. but the screen on my iphone 4S has frozen when I reached the screen saying it was ready to download and I was
seeing an "OK" button to press. Nothing happens and I can't get out of the screen. When I shut off the phone and cut it back on and go to "apps"
the frozen screen appears again. Any help???

Have you had an issue with a previous purchase from iTunes or has your credit card expired? Even though it is a free app, you may have to update your payment information, since you already have a credit card on file. They have to be updated in iTunes.
If none of that applies, try signing out, Restrt and sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try again.
if that doesn't work, you may have to contact iTunes Store Support and seek their assistance.
https://expresslane.apple.com/Issues.action

Is there any way I can convert a .exe file to .iso on my MacBook Air? I'm trying to install Windows via BootCamp but the download from Microsoft is a .exe file which does me no good.

I'm trying to install Windows 8 via Boot Camp, but the download from Microsoft is a .exe file so when I go to create the bootable USB drive, it fails. I've read some of the other threads about this topic, but I want to know if there is any way to convert to .iso without having to find someone's Windows computer to borrow. Can anyone help?

No. You would require a PC in order to run the executable which is an installer, not a disc image or an archive.

I'm trying to install FP 11.1 but the download box never appears.

I'm trying to install FP 11.1. It initiallized for a few seconds and then it goes to the help screen that tells me to click run in the download box but the download box never appears.

Hi baldspot65,
Please use direct download link for adobe flash player
http://fpdownload.macromedia.com/get/flashplayer/current/licensing/mac /install_flash_player_11_osx.dmg

I am trying to install new CAD software, but the computer will not open the ".dmg" file so the installation can begin. H E L P ! ! !

I am trying to install ViaCAD v7.2 for Mac, but when I try to open the ".dmg" file, it will not open, so the installation never begins.

I was trying to find the system specifications ViaCAD v7.2 but wasn't too successful. However I found the App Store has V8.0.2, have you already purchased 7.2? If so perhaps you could request an exchange for a more current version.

I'm trying to install 4.3.3 but the installation appears to have stopped halfway through

I started installing IOS 4.3.3 on my iphone but it is now stuck on the black screen with the apple and the progress bar is not moving. What can I do? Very irritating as I don't want to have to restore the phone again

hope this helps, it did for me, but i'm using windows
Mac OS X:
Step 1. On your Mac, go to your “Applications” folder.
Step 2. Now navigate to the “Utilities” folder.
Step 3. Launch "Terminal".
Step 4. Type "sudo nano /etc/hosts" (without quotes) and hit return.
Step 5. Enter your password
Step 6. Use the down arrow key to find the “gs.apple.com” entries. Once the cursor is in front, make sure you comment out the line(s) by entering “#” in front of the text.
Step 7. Save the file by pressing CONTROL+O.
Step 8. Exit the nano editor by pressing CONTROL+X.
Step 9. Restore your iDevice.
Windows:
Step 1. Start –> Programs –> Accessories
Step 2. Run Notepad or WordPad
Step 3. Click “Open..” from File menu.
Step 4. Browse to Windows/System32/drivers/etc
Step 5. In "files of type:" select all documents
Step 6. Open "hosts"
Step 7. Delete all line that has "gs.apple.com" or something like that
Step 8. Hit Save
Step 9. Restore your device
i was getting error code 1013 when attempting to restore, and this finally made it go away

I don't like some features in the new iTunes and my favorite visualizer doesn't work with it . I threw everything to do with iTunes away and tried to install an earlier version but the installer kept giving us this error page telling us to quit iTunes !

The installer is crazy . It keeps thinking that iTunes is running even though we dumped everything we could find ( preferences , application , libraries ) . Did I miss something ? Is there an uninstaller? I need an earlier than 10.5 version . I don't like the side swipe ( it feels unbalanced ) effect and my favorite visualizer doesn't work right with it . Thanks!

No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

TS1383 I have a 3rd generation ipod and it was fully charged and it randomly turned off and won't turn back on. I tried to put it to charge but the screen is still all black. What should I do?

So there I was just on facebook page through my iPod when it just shut down. I try to turn it on, but it didn't work. I tried to charge it but it wouldn't charge either. What should I do? What do you think is wrong?

Try here:
iOS: Not responding or does not turn on

I have a iq 804 and tried to upgrade to win 8, but the screen goes black after windows update.

i have been working with microsoft support for 5 hours everyday for the last 5 days. they could not help, now they ask to wait for hp to come out with new drivers to support win 8.any idea if they are going to add those since my computer is 3 years old

Here are the specs for your HP TouchSmart IQ804 Desktop Computer. According to the specs, this model shipped with Windows Vista 64-bit and was introduced for sale on or about 27-Aug-2008... making it almost 5 years old. Due to its age, HP has no intention of providing specific support or drivers for this model. Please read HP's position below.
THIS is HP's position on Windows 8 support and any HP computer not originally supplied with Windows 8;
1) Not all Windows 8 features may be available on all PCs.
2) Your particular experience with Windows 8 will be determined by the capabilities of your PC.
3) HP is providing upgrade instructions and drivers will be available for most Windows 7 systems sold after 1st October 2011.
4) If you want to restore the original operating system after upgrading, you must create HP recovery media before you upgrade.
5) Please note that if you purchased your system prior to October 1, 2011, HP has not tested these PCs or developed Windows 8 upgrade instructions or drivers for them. Upgrading such systems may be difficult or impossible.
and
Important information regarding additional limitations and requirements;
1) Screen Resolution Requirements
2) Limitations with DVD playback software
3) Limitations with Blu-ray playback software
4) Limitations with TV Tuner software
5) Secure Boot & other UEFI dependent features
6) Limitations with touch screen capabilities
"Windows 7 (also includes Windows Vista) PCs with touch screens will not have full Windows 8 touch capabilities after upgrade. HP PCs with touch input hardware designed for Windows 7 will provide a comparable experience for only two touch point applications after the upgrade to Windows 8. HP Windows PCs with touch input hardware will not support Windows 8 applications that require more than two simultaneous touch points. Additionally, Windows 8 edge swipes may not be available due to the recessed bezel on HP touch systems shipped with Windows 7."
7) HP TouchSmart Magic Canvas and HP TouchSmart applications are not compatible with Windows 8 and must be uninstalled before upgrading. Note that content created using the TouchSmart applications such as Graphitti will not be available after upgrading.
With all of that said, you may be able to install Windows 8 and it may work but many of its features may no longer function under Windows 8.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Installed the update tonight and now my phone (Lumia 928) won't power up. I've tried a soft reset, but the screen goes from the Nokia logo to a red Verizon screen to a black screen. What's wrong and how do I fix it? Help!

Installed the update tonight and now my phone (Lumia 928) won't power up. I've tried a soft reset, but the screen goes from the Nokia logo to a red Verizon screen to a black screen. Tried it 10 times with the same result. What's wrong and how do I fix it? Help!

Oh no Mr.Ected!
I can see if we can get your phone back on! I understand how important it is to have a phone. Have you tried this to see if we can get it back on? http://vz.to/1DZhteH . If it is still goes to a red Verizon screen and then to black we might need to do a master reset. While the phone is off try this:http://vz.to/1DZhXkU Be mindful this is the last resort because it will erase everything on the phone. If you have done back up assistant in the past you will be able to get you contacts back. Please let me know if you need any more help.
AmberF_VZW
Follow us on Twitter @VZWSupport

I am trying to install itunes 10.5 but I get an error message that says click ok to try again or enter an alternate path to a folder containing the installation package iTunes.msi...I try to point iTunes to the .msi file but that is not working.

i am trying to install itunes 10.5 but I get an error message that says "click ok to try again or enter an alternate path to a folder containing the installation package iTunes.msi..." I try to point iTunes to the .msi file on my c drive but then it gives me a message says "the file location is not a valid installation packaage for the product iTuness. Try to find the installation package 'itunes.msi' in a folder from which you can install iTunes". Any help, insight, guidance would be greatly appreciated!!

"The feature you are trying to use in on a network resource that is unavailable. Enter alternate path to a folder containing the installation package itunes64.msi".
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

I tried to install itunes 10.5 but recieved an error msg saying there is a problem with this windows installer package anyone got any ideas how to fix this?

i tried to install itunes 10.5 but recieved an error msg saying there is a problem with this windows installer package
i am trying to update my iphone 4 to ios 5 therefor require itunes 10.5 the installation process then rolls back and closes with no further explanation can anyone help?

There are numerous threads discussing errors with 10.5.0
can't install itunes 10.5
***Fix for iTunes 10.5 Install on Win7 64bit***

Was trying to install windows 8.1 but didn't install bootcamp first. Am in a loop. Keep coming back to the windows setup page. What to do?

Was trying to install windows 8.1 but didn't install bootcamp first. Am in a loop. Keep coming back to the windows setup page. What to do?

Please reset NVRAM - Startup key combinations for Intel-based Macs - Apple Support and OS X Mavericks: Reset your computer’s PRAM. You have Bootcamp settings in the nvram that are causing problems.

I tried to install 7.0.6, but the screen froze. Help?

Similar Messages

Maybe you are looking for