I tried to install AT-GPIB card to PC Window 98.

I just installed 488.2 for Dos/Win that included in the package AT-GPIB, but it causes my PC freeze. I tried to removed what I installed before by deleting directly AT-GPIB folder from C drive. Then I followed the procedure descriebed on NI web page (GPIB Installation Wizard):
- I downloaded atwin271.zip and I installed it
- I replaced the gpib-16.dll and gpib-32.dll files with those from the Compatibility Release. The error message display "File Copy operation failed-incorrect number of bytes written to disk - source file on destination disk may be corrupted - use chkDsk. Source:\GBIB-16.dll' Dest C:\Windows\System\GPIB.16.dll" while I tried to installed atwin271.zip. My questions are please tell me how to remov
e everything of GPIB that I installed before (it not displayed on "add & remove softwar") and how to correct the error.
When I tried to add new hardware (Control Panel) I got the error message:
"Setup cannot load the installer (GPIBI16.DLL) for the GPIB hardware being installed. Contact your hardware vendor for assistance." Another question is My test system run a program in C language on PC 386 with Dos environment. Now I tried to move the program and AT-GPIB to new PC with Window 98 operation system. Please tell me what is the best way to perform this task. Do I still use the program execute file of C language to new PC or I should run and combine a new execute file with the new PC system? Thanks
Anthony

Hi,
I think the following knowledge base article has the information you need:
http://pong.ni.com/public.nsf/websearch/862567530005F09C862566A3006B21CD?OpenDocument
DiegoF.

Similar Messages

I'm trying to install iTunes on my computer running Windows 7 Home Premium.. I'm not sure if iTunes is compatible with it because when I try to install it, it says the installation is complete but it says there was an error so I can't get it! Please help!

Hellooo Apple Community!
I'm trying to install iTunes on my computer running Windows 7 Home Premium. I'm not sure if iTunes is compatible with my computer operating system because when I try to install it, it says the installation is completed but it says there was an error so it won't let me get itunes! Can someone please tell me if iTunes can be downloaded and installed on "Windows 7 Home Premium" and if so, how?! I need iTunes asap, I have an iphone 4 running ios 6.1.3. Please get back to mee!!
Thankyou thankyou thankyou!
Natalie.

I just tried running the Lenovo Hard Drive Quick Test both in normal mode and in safe mode. Both times it indicated a failed read test on the HDD. The last two tests also failed. I forget what those tests were called.
I am really beginning to think I have a bad HDD and the problem just happens to be in the reserved partition where my factory system software resides.

Trying to Installing EBS R12.1.1 on Windows XP 32 Prof SP3

For the last one month I am trying to install EBS R12.1.1 on Windows XP 32 Professiional SP3
with the help of different post from this Forum, so thanks to all who belives in sharing knowlegde.
Now i am at Step 3 of 5
at 53% of
Command D:\oracle\VIS\inst\app\VIS_r12win32\temp\adrunias.cmd
and 92% of
Registering Applications Technology Stack
follwing are the log files
tried to insert the log here but its too big so uploaded on google drive
https://docs.google.com/file/d/0B5JwCkVi57yibnF6cWhqSjZDMzg/edit?usp=sharing
and
https://docs.google.com/file/d/0B5JwCkVi57yiR1FQQkd4WkNmSVE/edit?usp=sharing
Please if anybody can help.
Thanks
muntasir
Edited by: 961537 on May 30, 2013 4:41 PM

i tried to insert the log here but its too big so uploaded on google drive
D:\oracle\VIS\inst\apps\VIS_r12win32\logs\05301221.log ---->> https://docs.google.com/file/d/0B5JwCkVi57yibnF6cWhqSjZDMzg/edit?usp=sharing
D:\oracle\VIS\inst\apps\VIS_r12win32\admin\log\ApplyAppsTechStack.log --->> https://docs.google.com/file/d/0B5JwCkVi57yiY3pvM21UdnR4c2s/edit?usp=sharing
D:\oracle\VIS\apps\apps_st\appl\admin\VIS_r12win32\log\ApplyAppsTechStack.log -->> https://docs.google.com/file/d/0B5JwCkVi57yiVERWTWk4NzdLZU0/edit?usp=sharing
D:\oracle\VIS\inst\apps\VIS_r12win32\admin\log\ohclone.log -->> https://docs.google.com/file/d/0B5JwCkVi57yibDd0Qmt0UUdLZ3M/edit?usp=sharing
D:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_r12win32\NetServiceHandler.log -->> https://docs.google.com/file/d/0B5JwCkVi57yiaDB4QnFhY05BRGc/edit?usp=sharing
D:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_r12win32\05301521\NetServiceHandler.log -->> https://docs.google.com/file/d/0B5JwCkVi57yiUm5HSFFVSGg4TVE/edit?usp=sharing
D:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_r12win32\05301221.log -->> https://docs.google.com/file/d/0B5JwCkVi57yiR1FQQkd4WkNmSVE/edit?usp=sharing
D:\oracle\VIS\inst\apps\VIS_r12win32\admin\log\ApplyAppsTechStack_05301529.log -->> https://docs.google.com/file/d/0B5JwCkVi57yibFR0YmttVXBWU00/edit?usp=sharing
Please if anybody can help.
Thanks
muntasir
Message was edited by: 964540

I am trying to install Photoshop Elements on my new Windows 8 computer (I recently upgraded my windows 7 computer where Photoshop was working fine on before). It says the serial number is invalid. Do older versionsnot work on Windows8, or do I need to u

I am trying to install Photoshop Elements on my new Windows 8 computer (I recently upgraded my windows 7 computer where Photoshop was working fine on before). It says the serial number is invalid. Do older versionsnot work on Windows8, or do I need to uninstall it from my old computer first?

You are allowed to have two activated installations. If you happened to have one on this Windows 8 machine before, it is possible that the activation used for it was never deactivated (did you deactivate it before you upgraded Windows?). Talk to Adobe support thru chat. They might be able to resolve this with you:
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

I tried to install iTunes 10.6.1 for Windows (64 bit) and it says "A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404). I have tried uninstalling everything and reinstalling and it still does not work.

I tried to install iTunes 10.6.1 for Windows (64 bit) and it says "A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404). I have tried uninstalling everything and reinstalling and it still does not work. I then restored my computer to a week ago and tried to download and install the update and this came up again.

Check out this thread:
https://discussions.apple.com/thread/3677426?start=0&tstart=0

I'm getting error 205 when trying to install ID with Creative Cloud on Windows 7. Help please.

I'm getting error 205 when trying to install ID with Creative Cloud on Windows 7. Help please.

Creative Cloud Help / Error downloading Creative Cloud applications
http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html

I am trying to install iTunes 12.0 on my Windows 7 PC to sync my iPhone6. I am getting error message, "Item already exists" on installation of iTunes 12.0. Apple has no fix. Help???

I am trying to install iTunes 12.0 on my Windows 7 PC to sync my iPhone6. I am getting error message, "Item already exists" on installation of iTunes 12.0. Apple has no fix. Help???

Item or object?
For "Object already exists" or "Access denied" errors when installing try opening Control Panel > Programs and Features > View installed updates then checking for Security Update for Microsoft Windows (KB2918614). Uninstall if you have it, then reboot and try installing again.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

I'm trying to install iCloud on my PC running Windows Vista with Service Pack 2 and I get a message that the set up program is not a valid win32 file.

I'm trying to install iCloud on my PC running Windows Vista with Service Pack 2 and I get a message that the set up program is not a valid win32 file. Can anyone help me with this?

What is the exact error message?

Hai friends one help .. I tried to install siebel 8.1 (sample) in windows 7

Hai friends i tried to install siebel 8.1(sample) in windows 7 i tried and installed everything perfectly.. its not working fine..
First i installed siebel client and next siebel sample dumb and next is siebel tools
while i installing siebel tools it throwing an error like tat missing Microsoft sql Native client is missing .. and how can i overcomethis (MSNC)
and client is also not opening fine. Can u elaborate the steps and how can i install successfully siebel 8.1 in windows 7 ?
is it possible please explain me and help me to guide and suggest me
Thanks & Regards
Kiran

Kiran,
Please mention the exact error you are facing. Were the Siebel 8.1 image files created successfully ?
Before we install the Siebel client software on our Microsoft Windows workstations or laptops, we should verify that the following
prerequisites are met:
1.) Database client software is installed (for Developer Web Client only) [Since you dont have the server env. , you dont need to install db client]
2.) The user account for the installation has administrative rights. (user account must be a member of the local Administrators group)
3.) Browser security settings are correct
Once you have created the Image files for Tools,Client and Sample DB , just run the oui.exe for Tools/Client , and install.exe for Sample DB.
During Client installation , one thing to note is , Internet Explorer is launched . Here , the browser loads the predeploy.htm file in the client's bin directory to load
the preconfigured ActiveX controls. When the page displays The download is complete… we can close the browser window , and the installation continues.
For Sample db installation , In the Destination Folder section, click Browse and navigate to the Siebel client installation directory.
(i.e. Client need to be installed before the sample db)

I am trying to install iTunes in my 64 bit Windows 7 PC. My PC runs normal. But when I try to install Itunes from Apple website, i get message "The Configuration data for this product is Corrupt".

I am trying to install iTunes in my 64 bit Windows 7 PC. My PC runs normal. But when I try to install Itunes from Apple website, I get a message "The Configuration data for this product is Corrupt contact your support personneI" I
am so disgusted,please help!!!

Hey madnest,
Thanks for the question. After reviewing your post, it sounds like you are having difficulty installing iTunes in Windows. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
Issues installing iTunes or QuickTime for Windows
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Trying to install CS5 on new laptop with Windows 8 pro. Keeps telling me to close Google Chrome when it's already closed.

trying to install CS5 on new laptop with Windows 8 pro. Keeps telling me to close Google Chrome when it's already closed.

Terminate the relevant processes in task manager, including the Google updater service.
Mylenium

Why does it say "The configuration data for this product is corrupt. Contact your support personnel." when trying to install itunes64installer on my b4 bit windows 7 acer pc? Any help would be much appreciated...

Why does it say "The configuration data for this product is corrupt. Contact your support personnel." when trying to install itunes64installer on my b4 bit windows 7 acer pc? Any help would be much appreciated...

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Trying to install iTunes to older laptop running Windows XP, getting message during install "There is a problem with the Windows Installer Package".....

Trying to install iTunes to older laptop running Windows XP, getting message during install "There is a problem with the Windows Installer Package".....

Here's the iTunes installation troubleshooter for Windows:
http://support.apple.com/kb/HT1926

Trying to install a grapgics card on a p7-1267c

Hello
I'm trying to install a nivida geforce gtx 650 to my p7-1267c, i have upgraded the power supply and tried to update the bios, but the system still shows the old bios. I cannot get beyond the hp start up screen with the card installed. without the card in the computer boots up just fine. Any advise or trouble shooting that i can do? do i need a new motherboard?

According to specs, the GTX650 series cards require a minimum of a 400W PSU, and a PCIE 6pin power plug.
What PSU did you install? Is your BIOS UEFI? Is the card UEFI compliant?
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Error Message access denied when trying to install on SD Card

Hi,
I got this errormessage whan I'm trying to install the image about CMD (run as Admin):
C:\FFUTEST>dism.exe /Apply-Image /ImageFile:flash.ffu /ApplyDrive:\\.\PhysicalDr
ive1 /SkipPlatformCheck
Access is denied.
Does anybody know a solution?

Are you able to see the SD card in file explorer? When you performed the diskpart command sequence:
diskpart
list disk
exit
Did your SD card show up as physicaldrive1?
Is the SD card either 8 or 16 GB in size and Class 10?
Also, are you running this command on a Windows 10 install?
You might check that explorer or cmd don't have a reference to the SD card still. If a program is accessing the card that might prevent DISM from accessing it in exclusive mode.
Jonathan Tanner | Microsoft | Windows 10 IoT Core Insider Preview Support | This posting is provided 'as is' with no warranties and confers no rights.

I tried to install AT-GPIB card to PC Window 98.

Similar Messages

Maybe you are looking for