I tried to install the latest itunes on my Windows 8 computer and it is not responding. Nothing happens.

I got an HP computer with Windows 8 already loaded on it. I have tried unsuccessfully for months to put itunes on this computer. I try and then give up. All I am able to get is a non-responsive program. Just a white screen with a blue spinning circle. I have tried several suggestions - run in administrator mode, try changing the compatibility, but am lost and frustrated. I am not very technologically savvy, so please help!

Hello cnitz,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Start iTunes in Safe Mode
Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
Click Continue.
See if the issue you're experiencing persists in Safe Mode.
Best of luck,
Mario

Similar Messages

  • I am trying to install the latest itunes software to my computer. After installing I keep receiving the error messages. Runtime error. Please help

    Hello
    I am trying to install the latest itunes software to my computer. After installing I keep receiving the error messages. Runtime error.
    Please see the screen capture of the error messages.
    Please help, Thank you
    Ab Majid

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • I receive an error message when trying to install the latest Itunes program on my computer using windows 7, 64. I receive the message, "service  apple mobile device fails to start"

    What must I do to install the latest Itunes program using windows 7, 64. The program stops when the service portion is installing and states, "Service Apple mobile division fails to start"

    Well, shucks, i just spent almost 30 minutes trying to find your model user guide to explain it better, I guess they never got around to making it.....
    I would just borrow another Windows disk and try installing it again and if it does it again then you might take it to an Apple Store and see if one of the "Genius' " can figure it out.
    Make sure your internet is enabled and click on your blank desktop and at the top of your screen is a Help menu option, enter PRAM and it should give you a list of things relating to Pram. It may take a few seconds to list anything as it has to connect to Apples severs first. It should list the things you may have to fill back in when your done.
    "P-ram" stores some common information that is used in the background, your date, time, startup disk, etc, that you don't have to re-fill when you restart, it's a little different for each computer.

  • I'm trying to install the CC app on my windows vista and it seems not to work not giving me the results it should

    It's giving me only cs6 versions and Acrobat isn't listed either

    CC apps don't install or run on Vista.
    They require Windows 7 or later.
    System requirements | Creative Cloud

  • I tried to install the latest update on my iPhone 4s and now it seems to be frozen with an apple icon and a  loading bar on the screen.  Any ideas?

    I tried to install the latest update on my iPhone 4s and now it seems to be frozen with an apple icon and a  loading bar on the screen.  I've tried turning it off, plugging it in to the wall outlet, plugging it into my computer.  Nothing works.  Any ideas?

    connect it with the computer and let it finish or restart the process it takes a very long time

  • Trying to install the latest iTunes on my Gateway w/ Windows XP.  I keep getting the message "Service 'Bonjour Service' (Bonjour Service) failed to start.  Verify that you have sufficient privileges to start system services."

    Hi, I'm trying to re-install the latest iTunes on my Gateway w/ Windows XP.  I had to update it a while back to put songs on my brother's iPod, but my computer froze halfway through and nothing has worked right since. 
    I keep getting the message "Service 'Bonjour Service' (Bonjour Service) failed to start.  Verify that you have sufficient privileges to start system services."
    I looked through older discussions that told me to go to right click My Computer - Manage - Services and Applications - Services - Find Bonjour and restart it. 
    Well, the only option that I can click on is Start.  When I do, it says "Windows could not restart the Bonjour Service service on Local Computer.  Error 2: The system cannot find the file specified."
    Where do I go from here?  Help would be greatly appreciated, I've been trying to fix this for over a year now with no dice.  Also, I cannot do a factory reset (last effort) because it says the administor's account is disabled and I do not have the disc.

    Sorry if double posting is a no-no here, but I forgot to add that I've already tried disabling Spyware Doctor.

  • I installed the new software onto my windows computer and then couldn't open it.  I did the uninstall and reinstall and I am still getting the same  problem.  How can I get my itunes back?

    I installed the new itunes software onto my windows computer  and then couldn't oopen Itunes.  I did an uninstall and reinstall and still have the same problem.  How can I get my itunes back?

    It says " application failed because MSVCR80.dll is missing from computer and then when I click okay it says I tunes wan't installed correctly Please reinstall
    Many thanks, that's perfect. Try the following user tip with those ones:
    Troubleshooting issues with iTunes for Windows updates

  • HT1926 I am trying to install the latest itunes, and I get the error, unable access C:\ProgramData\34BE82C4-E596-4e99-A191-52C6199EBF69\GEARIFix.exe. I can access this dir via explorer but there is no such .exe.

    I am using Windows 7 and had to deinstall iTunes as it failed on a previous instal. i was told to update my iphone to iOS 6 so that I could get the iOS 6 supporting version of itunes.
    I have followed the FAQ to resolve install issues and have no apple software installed on my machine
    During install I get a dilog box open, with a retry and cancel buttons with the notice that the iTunes install cannot access the following file:
    C:\ProgramData\34BE82C4-E596-4e99-A191-52C6199EBF69\GEARIFix.exe
    In Windows Explorer I can open that directory, but that .exe is not present. iTunes installer thinks its locked
    the files present are
    Folder - x64
    DIFxAPI.dll
    DifXInst64
    GEARAspi.dll
    GEARAspi64.dll
    GEARAspiWDM
    sECURITY CATALOG - gearaspiwdmx64
    Help!

    this is the latest version of iTunes10.7.0.21 x64. The error I get is
    Error writing to file
    C:\ProgramData\34BE82C4-E596-4e99-A191-52C6199EBF69\GEARIFix.exe.     Verify that you have access to that directory. Retry or Cancel?
    Opening Windows explorer with hidden folders and files showing, I can access this directory. it contains 1 folder
    x64. I can paste and delete a file to this directory, which confirms I have access.
    Opening the folder x64, the following files are shown:
    Folder - x64
    DIFxAPI.dll
    DifXInst64
    GEARAspi.dll
    GEARAspi64.dll
    GEARAspiWDM
    SECURITY CATALOG - gearaspiwdmx64
    Opeing the folder x64, the following system file is shown
    GEARAspiWDM.sys
    I have tried all the steps to completely remove Apple software from my system as set-out in the FAQs.
    I cannot delete the Temp directory as there is one file
    FXSAPIDebugLogFile
    Where I get the file-in-use-error
    The action cannot be completed becuse the file is open in Windows Explorer
    I have tried the steps advised on Apple support 5 times now but always

  • Why do I get the following message: "Service 'Apple Mobile Device' failed to start. Verify that you have sufficient privileges to start system services." when trying to install the latest iTunes version?

    Every time I tried updating iTunes, there was an error. The last time, I was not able to start it up again, so I uninstalled iTunes and tried to install it again, but it just won't work.

    Solving MSVCR80 issue and Windows iTunes install issues.

  • Trying to install the new itunes/borjour for windows 64 but neither install

    I downloaded the current version of itunes for windows 64.  I received a message to install Bonjour and did so.
    I have 2 Bonjour items in Programs and tried to uninstall the one dated 2010 but received the message that this program is for 32bit and to go get the download/bonjourforwindows. html, which I did when itunes was downloaded and this version will not 'uninstall'.
    I tried to open the Bonjour Printer Wizard and received a message "Bonjour service is not available".
    Also, itunes is still version 9.1.1.12.
    HELP

    No one can help you if you cannot or will not provide specifics of the issue.
    TechnicallyLost wrote:
    then gives me an error message that says it wasn't able to finish because an apps file or something was not located.
    You might as well not even ask for help if that is all the detail you can or will provide... that statement is completely useless.
    Would you take your car to a mechanic and simply say "it just doesn't work"? 

  • Problems trying to install the latest flash player on Windows XP

    I have been trying for a while now to install flash player
    the latest version but keep getting the same error message 19166,
    does anyone have a solution to this please as it has now become so
    frustrating!!!
    I would appreciate any help please
    Thanks

    Don't know, but every time I try to download the 'correct'
    version of the Flash Player (9) as instructed by the BBC website to
    watch its videos, it tells me that it is already installed and do I
    want to replace it.... I click yes and it downloads OK. BUT still
    won't work and it still says I don't have the correct version of
    Flash Player.
    Been like this for a while now - no idea what to do about it
    and am not a techie.

  • I just tried to install the latest version and am getting an error message -- error 7 1114.  Help!

    Really frustrated that I just tried to install the latest iTunes update and it killed my iTunes. I have been at this for a couple of hours trying to fix it--suggestions welcome!

    Hi Meskijian,
    Thanks for using Apple Support Communities.  This article has steps you can take for the error you're seeing:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Ari

  • While installing the latest iTunes version I get the following msg:"Service Apple Mobile Device failed to start.Verify that you have sufficient privileges to start system services. I already tried it from the installer Running it as Administrator

    While installing the latest iTunes version I get the following msg:"Service Apple Mobile Device failed to start.Verify that you have sufficient privileges to start system services. I already tried it from the installer Running it as Administrator and still get the same message.  I click "ignore" and finish the installation but when I try to open it I get this "Runtime Error! R6034 An application has made an attempt to load the C runtime library incorrectly."  I already uninstalled iTunes and all other applications involved and re-installed itunes from the itunes site and the problem persists. Please help!

    Solving MSVCR80 issue and Windows iTunes install issues.

  • I tried to install the latest version of Itunes and now I cannot open it because I receive a message that says this version is corrupt  It says to reinstall and I have no idea what to do  Any help is appreciated

    I tried to install the latest vversion of Itunes and now I cannot open it because it says this version is corrupt and I should reinstall it.  I have no idea what to do.  Any help will be appreciated.  Thanks

    Solving the iTunes Installation Problems in Windows
    1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
    2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

  • HT1926 hey guys,i tried to install the latest version of itunes but when i try to open it,it just comes up windows error 2 apple application support was not found,can anyone help me out and tell me what i need to do pls ?

    hey guys,i tried to install the latest version of itunes but when i try to open it,it just comes up windows error 2 apple application support was not found,can anyone help me out and tell me what i need to do pls ?

    If you run into the "another installation" message even after the reboot of the PC (which is an excellent idea by HTP ProXy), reregistering your Windows Installer Service is worth a try.
    First, launch a command prompt as an administrator. In your Start search, type cmd then right-click on the cmd that comes up and select "Run as administrator".
    At the command prompt:
    Type %windir%\system32\msiexec.exe /unregister and hit enter.
    Type %windir%\syswow64\msiexec.exe /unregister and hit enter.
    Type %windir%\system32\msiexec.exe /regserver and hit enter.
    Type %windir%\syswow64\msiexec.exe /regserver and hit enter.
    Restart the PC and try another reinstalll.

Maybe you are looking for

  • SQL Database replication between Primary and DR site

    Hi, We are setting up a DR Site, for our Production SAP system. At present the curren setup for Production SAP system are as follows. SAP ERP 2005 (SAP ECC 6.), ABAP+JAVA on Windows with MS SQL Server 2005. Data are stored on SAN and SAP installed on

  • User registration

    I would like to do the following: 1. User registers (this will create a user saved in a database table). 2. A screen states that an email will be sent to him shortly asking him to activate the registration ID. 3. An email is sent to the user's email

  • Using logical operators when creating software groups

    Is there a way to use simple logical operators when using filters for creating software groups? An example of what I want to do is to select all updates for the past month - but not include Definition Updates for instance. So all update classificatio

  • RT File Size issues

    We are running PXI 8101 RT on LabView 2011 August release.  Occasionally we find the free space is gone and our data dir is corrupted. We are storing 50k/Sec*8channels for 8 hours in TDMS format.  This is probably about 80+GBytes.  We were doing it i

  • Agent delivery content delivered in tab delimited when csv selected

    I am facing an issue and I can't tell whether this is a bug or not. Running OBIEE 11.1.1.5 and creating an agent. When specifying the delivery content format to CSV it is always delivered as tab delimited. Is this a known issue? Is there any work aro