I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my compute
Please post options available
Hello Eainere,
Thank you for using Apple Support Communities.
It sounds like the phone is in recovery mode, and is not recognized in iTunes when you have it plugged in.
The steps to take next will depend on what Operating system you have installed on your computer.
For Mac OS:
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
For Windows OS:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
All the best,
Sterling
Similar Messages
-
Hi everyone! I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer, so I can't put it in recovery mode or someting like that... What can I do?? I tried everything they tell me to do in the apple support but nothing seems to work. Thank you!
No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine. -
I am in the process of updating my IOS and my phone screen is showing a picture of the itunes symbol with a USB cord. I can't get the phone to turn back on. What do I do? Help!!
Your device is in recovery mode. Connect the device to iTunes and the computer and follow the instructions in this support document. http://support.apple.com/kb/HT1808
-
I was in the middle of installing the new update using the wifi at a local restaurant when I lost the wifi signal and my iPhone shut down, and now I can't get into the phone. I only get the iTunes logo with the cable pic. What are my options now?
Your only option is to connect your iPhone to your computer via USB (as the diagram indicates) and restore using iTunes.
-
HT4528 I updated to ios6 and nowvi can't use my phone it has a plug picture
I updated to ios6 and nowvi can't use my phone it has a plug picture
It's in recovery mode. It's trying to tell you to plug it into your computer with iTunes and restore it.
-
How can i edit my contacts?and i dont really used my phone and its automatically add a contacts and email adds.. I dont know why that happen..i just turn my phone off and this is happen..
Contacts are synced with a compatible programme in the computer; in the iCloud or with Yahoo and Google Mail. You can directly "edit" a contact on the phone and/or within the programme that you are syncing your contacts with.
Have you configured/setup mails on your iPhone? If yes, check the contents of the mail account(s) individually. (including iCloud) from SETTINGS - MAILS, CONTACTS, CALENDARS
"Contacts" if chosen from the mail account (s) would add email addresses to your contacts.
http://support.apple.com/kb/HT1296 -
Tried to upgrading ipad 1 from itunes and l guess it did not complete the process because all I have showing on the ipad is the itunes logo with the usb cable. When l try to connect it to my system, it resquest that a driver be used to install the device. Please help! How do I restore?
Restoration is relatively simplistic. Here's whatcha do. Plug your ipad in, open itunes, now if itunes doesn't recognize it then you may have a problem, anywho, click on the ipad in the devices interface and go to the info tab, click restore, and it'll be just like it was when it left the factory. To get you data back, it should ask if you would like to use a backup, just select the backup you want and you'll be good to go. That is if you regularly backed up your iPad.
-
I tried to update my sons ipod. It has the itunes logo with a usb port on the screen. If I restore it I will loose all his games and music. Is there any way around this?? Please Help??
Yes, that is your only option.Yes. You have to restore.
Try the following if you have difficulty restoring.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Hi. I have downloaded the new iOS 6.0 software update but now I can't switch off the shuffle function when playing music. Help please. Stuart
I have the same problem and haven't been able to figure it out either
-
I downloaded the OS X on my air and I can't use my keyboard and it won't let me restart my computer because it says that the application assistant canceled the shut down, I don't know what to do
When all else fails (it sounds like it has) hold the power button for about 10 seconds. This shuts down the computer. Then tap it to restart. Since it sounds like the OS upgrade began but then failed to perform a restart you may find that the Install Mavericks file is still in the Applications folder and you can try again. Or you might find that you have to redownload. I don't think the installation is going to proceed as if the computer had successfully restarted but I could be wrong (and in this case gladly so for your sake.)
-
I just download the new iOS 7 on my ipad but I'm not seeing iTunes Radio in the music tab. Help!
I just download the new iOS 7 on my ipad but I'm not seeing iTunes Radio in the music tab. Help!
Try Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
I updated my iPhone 4S to the new IOS 6 I like it but the problem I found the Wifi button it's not working any more it looks hidden , so what I should do to solve this issue ASAP
Tap Settings App > General > Reset > Reset Network Settings. See if fixed. If not, Restore Firmware with iTunes on computer. See if fixed. If not, all iPhone 4S have Warranty, make Genius reservation and take iPhone to Apple for resolution.
-
My Iphone 5 suddenly turned off and there is only the Itunes logo with the usb image and arrow key. I've now connected to Itunes but it doesn't work
Have a look through this Doc
http://support.apple.com/kb/TS3281 -
Can anyone help with my iPad being frozen showing a iTunes icon with a USB cord
My iPad is frozen with an iTunes icon with a USB cord showing as we'll. can anyone help
Do what the picture is telling you. Connect the phone to a computer running iTunes and restore.
-
My apple tv, when connected to the television, will only show an itunes icon with a usb cord
My apple tv, when connected to the television, will only show an itunes icon with a usb cord. I don't know whay to do?
Don Sullivan wrote
"Same thing just happened to me. There was a software update available, it installed the update and then died with that visual on the screen. Reset doesn't work and it won't even show up in iTunes to try and do anything with it. I think they just bricked it on me."
Same thing just happened to me too...
I did an update a couple of days ago: and it seemed to be working fine. Just did another update today: got a flashing light, sometimes a blank screen, and sometimes the itunes logo / USB symbol...
Maybe you are looking for
-
Can you send an object behind text in the Ipad pages app so that the text is over the top of the object?
-
Dynamic jar file inclusion at run time
Hello, I have a java application which should accept the three parameters. 1) The jar file location 2) Particular Class file insdie that jar(we specified the location in step number 1) 3) And method name in that class. My question is how to include s
-
I can find tonnes of support for bluetooth accessories but can't seem to find an answer for help connecting a Touch to another Touch via bluetooth for peer-to-peer games etc! We have 2 ipod touches - both 2Gen, both with 3.1.2 software. We have tried
-
[solved] Booting a "Multiboot" OS only works with high amounts of mem
edit: ok, I hate when it happens, but I've just found the solution: raising the memory reserved for the virtual machine. It's funny, however, that such simple kernel won't boot with less than 128MB of RAM. I'm not sure if this is the right place to p
-
Annoying weird updating! Help!
Since I've updated to iTunes 5.0 my iPod has been updating strangely and incorrectly. Whereas before when I updated my iPod the new songs I had put into iTunes were the ones updated on to the iPod. But now, when I update iTunes seems to update songs