I tried to make my image larger by typing ctrl + a fatal error was created in typer shark on yahoo games

When I tried to make the game larger I pressed control plus. The image became different and all of the parts did not fit together like it was designed. I tried to make it like it was by pressing control minus (ctrl - ) nothing happened. When I start playing the game there is a gap between where the sharks enter the playing field and after playing three rounds the screen goes to a fatal error message and after a few seconds it goes to some other screen that I pasted below. I want to put the game size back to the original size.

Similar Messages

I'm trying to make a cd from my itunes. I get error message "cannot be used because it is not recognized.

I'm trying to make a cd from my itunes. I get error message "cannot be used because it is not recognized.

I just figured it out. All I had to do was close out of iTunes then restart.

I/O Error while trying to make an image of the bootcamp partition

Hei all.
I want to backup my Win-partition on my MBP.
But every time I try to make an image of that via Disk Utility, it gives me an i/o-error. I tried to do it logged in, while booted via the restore DVD, in Firewire-Target-Disk mode, on the internal HD and an external one, repaired the Volume, I can't think of anything else and don't know what I do wrong - the must be a way, doesn't it?
I'd be happy if anyone could help me, hope I've posted in the correct subforum,
greets,
Jojo

Well ok, think i don't need it anymore. thx anyways...

Trying to make an image of a Server but getting error message

I'm trying to make a disk image (.dmg) of an XServe. I boot the XServe off of an external drive, fire up disk utility and choose File>New>Disk Image from <server volume>
Then I choose where I want the .dmg file to be created. It doesn't matter where I try to put it (one of the additional two unused hard drives in Bay 2 or Bay 3, or on a network volume), I get an error message: "Unable to create <server volume> (Resource Busy)."
What am I doing wrong? Or what do I not understand yet?
Thanks.

Hi.
Tried another tactic. I booted up the XServe into Target Disk Mode on a MacBook Pro. Then fired up Disk Utility again and chose File>New>Disk Image from "server volume". It started, but erred out with the "Resource Busy" message. Then I tried the same thing but this time instead of "server volume", I chose File>New>Disk Image from "698.6 GB AAPL FireWire Target Media". It still erred out with the "Resource Busy" message. Then I tried File>New>Disk Image from Folder, and then chose "server volume", and then selected where to save the .dmg and it started to create the image, but erred out with "Unable to create "server volume" (No such file or directory)." Then I tried "Disk Image from Folder" again, but this time chose "698.6 GB AAPL FireWire Target Media", selected where to save the .dmg, and once again, it started to create the image, but erred out again with "Unable to create "server volume" . I'm at a loss. I am unable to create an image of the XServe HD and I need to. Does anyone out there have any ideas? Thanks.

I was trying to make a apple id but typed in the wrong email address

So i was trying to make a new apple id for my ipod touch because i got a gift card but i think i typed in the wrong email address because i have not gotten the comformation email yet. While your signing up it asks you if you want to add a gift card so i added my gift card but now if i cant get into my apple id then i just lost $15. please help

Contact iTunes:
Apple - Support - iTunes - Contact Us

Hi guys, I have a problem with my new macbook pro 15". I tried to updtate the apps (iPhoto, iMovie and Garageband), but an error was displayed "You have updates available for other accounts". I don't have other accounts!!! :(

Hi guys,
I have a problem, I have a new macbook pro. I updated the software without problems; then I tried to update iPhoto, iMovie and Garageband, but an error was displayed "You have updates available for other accounts". I don't have any other account, i tried everything found on the net but nothing seems to work...Please help me!!!!

Same thing for me it writes "To update this application, sign in to the account you used to purchase it."

I'm trying to reload Production Premium CS5.5. I get fatal error and it won't load Premier or AE.

I'm trying to reload Production Premium CS5.5 and I get a fatal error that says Conflicts found in selected payloads, halting installation. Everything loads except Premier and After Effects. What do I do next?

what error? copy and paste the error message.

Trying to install Presenter but getting no where with a "fatal error" message on chrome, firefox and safari.

Tried disabling firewalls, plugins, allowed java script... oy! any ideas?

Hi Jorma,
Thanks for your help I initially tried to down load Captivate, but was having difficulty, it wasn't downloading, I looked at the specifications on the adobe site and realized I don't have a DVD-ROM drive. I thought maybe that was my issue.
Upon further research I realized that the Adobe product Presenter could also work for my project and didn't have the DVD ROM requirement so I tried downloading that from the website.
I began using Safari, when I clicked the "trial button", it took me to the download page, where I logged in with my Adobe login and hit download. Immediately an Adobe dialog box opened up - and it looked like it began processing the download, however within 5-7 seconds the fatal error appeared. I tried several more times with the same result.
I googled the error message and was directed to the Adobe forum page, which was under construction but gave the advise to try the Adobe Twitter page.
Upon doing so, the agent who responded recomeended I try downloading from a different browser. So, I did, I tried with Firefox and with Chrome, Both resulted in the same "fatal error" dialog box.
The agent recommended that i turn off firewalls, plugins, blocks etc... which, I tried... not sure if I did it right, but even so, got the same results and have been unable to download the trial. Im not really that technically inclined to instinctively know what to turn off or on.... But I sure can follow directions so, if you have an idea of how I could solve my issues that would be amazing! I was just going to log on to the Apple store to see if I could get an appointment with a genius to try to help me... but would love to save a trip out in the sub temperatures and use up my day!!!!
. I am using a Macbook Pro Retina, 15 inch (early 2013) with a 2.7 GHz Intel Core i7 Processor, 16 GB 1600 MHz DDR3 of Memory, and Intel HD Graphics 4000 1024 MB.
Thanks again so much for your time!!!!

Trying to make an image fill from other template my page background

I want to make the green box in the below picture the page background (and not manually by dragging the box as big as the window). Is that possible? Can I somehow get the image file for it?
http://yfrog.com/40picture1bxp

One reason would be if you had begun with a Page Layout template rather than a Word Processing template. The option isn't available in Page Layout because of the lack of a Text Layer in that mode.
Jerry

Cannot buy apps , when i tried to make an account , it said payment method declined. though i was using a valid master card. ?

its pretty annoying , i tried registering with 2 diff cards,,both the time it said payment methid declined . why is this happening. helpppppppppp

rockyboy223 wrote:
I thought the question was implied. How do I get this fixed so I can make the in-app purchase?
By doing exactly what it said to do and what you have alrready done:
"Please contact Itunes Support to complete this transaction"
This is an issue with itunes support. You have done all you can do

Can no longer make system image after Win 8.1 upgrade (error 0x80780119)

I've recently upgraded to 8.1 and am now trying to make system image.
Unfortunately, it's failing with error 80780119.
[Image of failed backup|http://www.sawyourad.com/toshiba/failed.png]
I've had this happen before on another computer system, and resizing the recovery partition seems to fix it, and is what's suggested on the web.
However, I can't seem to do that on this machine, diskmgmt.msc doesn't seem to show any disk space used, and worse, many of the partitions seem to be duplicated
[image of disk partitions|http://www.sawyourad.com/toshiba/diskmgmt.png]
You'll notice that none of the recovery partitions appear to have any space used.
I'm at a loss as to what to do next.
The 8.1 update has pretty much rendered my machine unsafe to use, as I can't back it up any more.
I hope I don't need to add Toshiba to my don't buy list.
Anthony Wieser
Wieser Software Ltd
+Message was edited: link has been removed - not allowed+

Hi
>I hope I don't need to add Toshiba to my don't buy list.
This is not a option buddy. Why? Because it seems that this is a common Windows issue as many people asked for a solution in the Microsoft forums and community.
[Backup fails Error code 0x81000019|http://social.technet.microsoft.com/Forums/windows/en-US/25deba76-464b-4a9d-9b32-a283bb6a88ce/windows-7-rc-backup-fails-errorcode-0x81000019?forum=w7itproperf]
Someone solved this by de-selecting the create driver image checkbox available when you choose the contents of the backup.
But it looks like his error come when hidden System Reserved partition created by Windows system does not have enough space to store a shadow copy.
Please check the freespace on this volume.
Follow the following steps:
1. Start -> Computer -> Right click -> Manage
2. Select Storage -> Disk management.
3. Verify that you have a System Reserved partition of around 100 MB size or more
4. If yes, right click on this volume and select Properties.
5. View used and free space.
Windows backup requires around 40 MB of free space on this partition to backup successfully.
So if the free space is less than 40 GB, backup does not get enough free space.
As a workaround try the following solution:
Since the default System reserved partition cannot be extended, creating a new system volume is the workaround. Here are the steps to move the system volume to any other volume:
1. Choose where you want to have your system volume.
Few things you need to keep in mind:
a. System volume can only be created on a primary partition of MBR disk.
b. If system volume & boot volume are together, then BitLocker feature cannot be used to encrypt volumes on your machine.
2. Suggest creating a new volume (say F:) on the same disk that contains the boot partition of size of about 490 MB (be careful to keep it less than 500 MB).
3. Assuming Windows is installed on C: on your machine. From an elevated command-prompt run: bcdboot.exe /s C:\Windows /s F:.
4. From elevated command-prompt run: DISKPART
5. From the disk part command-prompt:
DISKPART> select volume F
DISKPART> active
Now you can reboot your machine and F: will become the system volume.
You can undo this by repeating the same steps using the original system volume (you have to assign drive-letter to it) to revert to your previous configuration.

How can I make a photograph large enough for large format printing?

Is there a way to make an image larger on photoshop or illustrator? I will be printing on a large format latex printer. So the printer itself is excellent but its the image that i am struggling to acquire.
I have basic knowledge of the programmes but if you could explain it to me i could figure it out.....
I am aware of rasterize and vectors, but please could you explain how they work, and if that is my solution.
I want to keep the original photograph as realistic as possible (would prefer not to have it traced on illustrator) and from research it says simply increasing the image size amount of pixels on photoshop does not help...perhaps it does, if you know please help!
This will be a print for an interior wall of an exhibition trailer, and we want to cover all the walls. Plus in future we will be printing for vehicle wraps so I need this knowledge! Help me

Let e try to explain briefly...
"Is there a way to make an image larger on photoshop or illustrator? I will be printing on a large format latex printer. So the printer itself is excellent but its the image that i am struggling to acquire.
- The actual resolution necessary to print grand format depends on the printer. Most of the large-to-grand format inkjets print at 600dpi. Photoshop is the better application for sizig images, while Illustrator is the better application for sizing graphics ( ie., logos ) and type. Use Illustrator to layout both the images and the graphics. You typically would send the print vendor an appropriate PDF file ( that can be scaled ).
I have basic knowledge of the programmes but if you could explain it to me i could figure it out.....
I am aware of rasterize and vectors, but please could you explain how they work, and if that is my solution.
I want to keep the original photograph as realistic as possible (would prefer not to have it traced on illustrator) and from research it says simply increasing the image size amount of pixels on photoshop does not help...perhaps it does, if you know please help!
- You most certainly can use photographs in large format. The problem is you will have to setup the file scaled down. In some cases, the output will have to be assembled in sections. Let's take a section of 10 feet high x 36 feet long. You'd setup your Illustrator file 2.5 feet high x 9 feet long ( 25% ) or 30 inch x 108 inch to be enlarged at the printer 400%. Each time you enlarge an image 2x you cut its resolution in half. So, an image starting at 300ppi will end up at 75ppi. So, your image file would need to be 300ppi at 25%. 75ppi sounds low, right? In actuality, it is enough to print grand format and the image appears smooth. Now the question becomes, how do I get an image large enough in Photoshop? Remember, you'll need a 30" x 108" image plus bleed at 300ppi ( Placed in Illustrator at 100% ). There are applications like Genuine Fractals or Image Doctor's "Blowup" which will enlarge an image file without degradation. I use Genuine Fractals and the results are phenominal.
This will be a print for an interior wall of an exhibition trailer, and we want to cover all the walls. Plus in future we will be printing for vehicle wraps so I need this knowledge! Help me "
- It'll become easier as you do more of this type of work. The amount you end up scaling is up to you. There are limitations as to how big a document can be in Illustrator. I like 25% because it is similar to working on a print ad that is high resolution. Another thing to remember is set your raster effects to High in Illustrator. They will be retained in the PDF which will be enlarged 400% and the ending raster effects will be 75ppi just like the image. Also, feel free to contact the print vendor and ask them questions. You could send them what I've written here and see if they agree. Let me know if you have any further questions.

How do I make the image to a link?

I am trying to make the image a link. I have the facebook logo position on the left sidebar, but I need to make it a link. Here is my code:
<div id="sidebar">


Alan is a certified Renovation, Repair and Painting Contractor. 

Click to see certificate

<a target="_blank" href="http://www.facebook.com/pages/WE-SHOW-UP/198687606583?ref=ts%3Cimg%20src=">
 
 
</div>
Something went wrong here, because the whole right side became the link, but the facebook logo is not working.
Here is the image.
Thanks!

<a target="_blank" href="http://www.facebook.com/pages/WE-SHOW-UP/198687606583?ref=ts%3Cimg%20s rc=">
It's also missing any meaningful HTML to apply that link to!
The code is so horrible I'm not sure there is a simple fix. It appears that you are wanting that link to apply to the facebook image which is used as a background image -
<a target="_blank" href="http://www.facebook.com/pages/WE-SHOW-UP/198687606583?ref=ts%3Cimg%20s rc=">
 
But you cannot apply a link to a background image. Ideally, you would have something like this -
<a target="_blank" href="http://www.facebook.com/pages/WE-SHOW-UP/198687606583?ref=ts%3Cimg%20s rc="><img src="images/facebook_logo.png"/></a>
Where the image is contained within the anchor tags. But that's not possible given the code we have been shown - the whole layout approach would need to be changed.
Where did this code (*ew*) come from?

I tried to make Apple ID. The process was interrupted by timeout. Re-attempt says, this email address is in use. "Forgot your Apple ID?" can not be identified the names and e-mail address. "Forgot Your Password?" e-mail sent, but never received. What now?

I tried to make an Apple ID on iPhone 3GS. The process was interrupted by time-out. Re-attempt says, this e-mail address is already in use. "Forgot your Apple ID?" cannot be identified the names and e-mail address. "Forgot Your Password?" e-mail sent, but never received. What now?

Solved.

Been trying to make a purchase on an App. It says Opps transaction cannot go through. On the Apps end it shows the purchase was created but never went through. How do I fix it so I can make the purchase

Been trying to make a purchase and the App says Opps, transaction error. On the Apps end it shows the transaction was created but didn't go through. How can I get the transaction to go through

just call them...i bought my PB when it came out...but I had an issue recently and called them up and they helped me out....
Sorry can't help you with any of the other problems...mine are working fine...

I tried to make my image larger by typing ctrl + a fatal error was created in typer shark on yahoo games

Similar Messages

Maybe you are looking for