I tried to overclock and the Raid 0 Array failed
Is there any way to get my Athlon 64 3200+ Clawhammer to 2.2 Mhz without ruining my Raid 0 array? I don't know how to OC on these boards.
Quote
Originally posted by Negator
I just set it to 67, and I have a SATA controller card I can use if I need to.
This was your problem. With it at 66mhz the PCI/AGP speed up when you change the FSB/Memory/HTT speed :-)
With it at 67 it locks the PCI/AGP so this will make your pci based sata controller not freak out. So now move your computer to 215fsb and lets see what happens. If it won't post or load windows then loosen the timings quite far and try again if it works then bingo you know what to do tightin the timings up until you get to what you consider to be good :-)
Similar Messages
-
Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support -
I am trying to open iBook on my iPhone 5s with iOS 8.2, when it opens I have a white screen for a few minutes, then iBook closes. I have tried restarting iBook, and the phone, but it still happens, any suggestions?
do a reset: hold the power and home buttons simultaneously until the Apple logo appears.
-
My old computer crashed and I am trying to download Adobe X Pro on my computer. I have tried to download and the only download I can find is the Adobe XI Pro. Any help would be appreciated. I have the product key but it's not deactivated on my old computer.
if you need to deactivate, contact adobe support
https://helpx.adobe.com/contact.html
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'. -
I have nine, 1-page PDF files that are accessible and need to combine into 1 PDF file. I have tried appending, adding and the combine PDFs process. The file created is not keeping my changes. The created file is partially accessible but I have to re-fix issues I had fixed in the single files. I need suggestions on what else can be done if any. Using Acrobat pro XI.
Out of habit, I tend to combine PDF files in the Page Thumbnails pane by right-click then "Insert Pages" -> "From File". For me, this preserves the tags from both documents, although the tags may have to be moved into the right location (if I recall correctly the tags for the inserted pages get put at the end of the tag structure, regardless of where the pages are inserted), If I first put the tags for the document to be inserted inside a container tag like Section, it makes the process easier. Moving that set of tags to the right place is the only re-fixing that I recall having to do. What behavior are you experiencing?
a 'C' student -
I tried to reset and the light blinks but nothing happens after that. It won't allow me to move the cursor on the home screen. Any suggestions?
Unplug the device from power and plug it back in.
If it still fails to respond properly, connect it to a computer via microUSB and restore via iTunes. -
I disabled my iPhone 4 and while doing a restore via iTunes, it is downloading and timing out so the download is not completing. any idea how to get past that? I have tried many times and the same error keeps happening.
You need to force the phone into recovery mode, as described here, & restore it:
http://support.apple.com/kb/ht1808
Sorry, you've already lost all data on your phone. -
I can't upload pictures to Facebook Pages albums with my IPad Mini 3. I've tried safari too and the basic uploader doesn't work. I can add photos to the wall but I need to put them in albums for my Boutiqu
It is peculiar, that Chrome, Safari, and Skype can access FB, but not the iPhoto uploader.
Do you see any error messages/ diagnostics in the Console Window, when you try to connect to Facebook?
Launch a Console window from Applications > Utilities and clear the Console Window. Then try to upload. Are there any new messages?
And also launch a Terminal and have a look, if "facebook.com" is properly resolved:
Type
ping facebook.com
into the window. Do you see any transmissions? What is the IP address used?
I see:
PING facebook.com (173.252.110.27): 56 data bytes
64 bytes from 173.252.110.27: icmp_seq=0 ttl=243 time=110.486 ms
64 bytes from 173.252.110.27: icmp_seq=1 ttl=243 time=109.365 ms
64 bytes from 173.252.110.27: icmp_seq=2 ttl=243 time=110.101 ms
64 bytes from 173.252.110.27: icmp_seq=3 ttl=242 time=109.829 ms
64 bytes from 173.252.110.27: icmp_seq=4 ttl=242 time=111.323 ms
64 bytes from 173.252.110.27: icmp_seq=5 ttl=242 time=110.346 ms
64 bytes from 173.252.110.27: icmp_seq=6 ttl=242 time=110.708 ms
64 bytes from 173.252.110.27: icmp_seq=7 ttl=242 time=112.685 ms
64 bytes from 173.252.110.27: icmp_seq=8 ttl=243 time=124.256 ms
64 bytes from 173.252.110.27: icmp_seq=9 ttl=243 time=112.106 ms
^C
--- facebook.com ping statistics ---
10 packets transmitted, 10 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 109.365/112.120/124.256/4.159 ms
Try the same with "dig":
dig facebook.com
; <<>> DiG 9.8.3-P1 <<>> facebook.com
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 25051
;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0
;; QUESTION SECTION:
;facebook.com. IN A
;; ANSWER SECTION:
facebook.com. 775 IN A 173.252.110.27
;; Query time: 11 msec
can you "ping" facebook? -
I'm trying to prepare some new iPads using Apple Configurator and the download of IOS8 failed.
The error in Apple Configurator is "Unable to download iOS 8.0. The firmware image was corrupted. Please retry the operation."
Is there a way to get the Apple Configurator to try to re-download iOS 8?Apple Support had me delete the image file from the following location:
~/Library/Containers/com.apple.configurator/Data/Library/Caches/com.apple.confi gurator/firmware/
The file name was iPad3,4_8.0_12A365_Restore.ipsw
I deleted this file and ran the prepare again and it download the iOS 8 ok and successfully prepared the iPad. -
My iPad free space was shrinking. Previously I did an iOS upgrade and got more free space so I tried a restore and the same thing happened. Do I have a setting wrong? There was a significant change from 4.3 GB to now 10.2 GB. I still have all the same apps, photos, songs, etc. So what's up? Why does my space not recover after I delete things?
This is what I did to resolve the issue. First I did a simple Reset (Home and on/off until the Apple logo appears) and it didn't help. Then I did a Restore with a reload from the backup and that also accomplished nothing. Then, I did a Restore as new with NO reload from backup and that resolved my issue.
IF you choose to try the same thing, here are some cautions. Make absolutely certain that all apps, music, movies, etc. are present in the iTunes library. Also make absolutely certain that all "regular" data, such as pdf files, Word files, etc. are present and accessible somewhere on the computer's hard drive. Be aware that you will probably lose all game data (scores, etc.). I did not investigate a solution for that because I don't play many games and I really don't care about the game history. Finally, be forewarned that it is a bit tedius recreating all your folders and putting each app where you want it. -
my ipad is disabled because my daughter changed the passcode and then she forget it and now we tried several times and the ipad is sdisabled and says to connect to itunes what do i do to undisable it?
Try this first - I saw a recent post where a user with the same problem after an iOS update used his Apple ID password.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
When updating my iphone with new software it came up on screen with the cable and itunes sign (which is what I should get when restoration has been completed) yet it is still saying restore. I have tried 3 times and the screen won't change. HELP!
If the sign does not go away it has not completed the restore. So you are incorrect when you say it "keeps completing the restore" if that message is still displayed.
Do you get an error message? If so, what is the error number? -
I recently attempted to re-install Mountain Lion on my MacBook Pro late 2012 model and the internet recovery is failing. I have absolutely no clue what to do here. Any help is greatly appreciated. Thank you.
- Currently if I boot it up there is a flashing folder icon with a question mark in it. I am assuming this means there is no OS because I wiped the SSD and tried to reinstall Mountain Lion
- When I hold Command+R, it prompts me to Choose Network... the problem with this is the wifi constantly is disconnecting. The Retina 2012 does not have an ethernet port so i have considered buying the attachment then returning when done.
Once again Thank you in advance.
Best.There is nothing to do if you don't have a reliable Internet connection unless you have a copy of the Mountain Lion installer application from when you first installed it.
Install or Reinstall Mavericks or Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
Tried changing language and resetting my phone but failed. I am using Starhub in Singapore currently.
The reset link will show on your account if you have a rescue email address on it, if you only have alternate email addresses then it won't show.
If the country where you and your iTunes account are isn't on this page (you need to be in a country to use its store) : http://support.apple.com/kb/HT5699
then you can try contacting support via this page and explain that you've forgotten your answers, don't have a rescue email address, and your country isn't on the HT5699 page and see what they reply with : https://ssl.apple.com/emea/support/itunes/contact.html -
I recently upgraded to Mavericks and the time machine is failing to backup. Time Machine began only backing up twice a day and now has stopped.
This is the error message I got:
2014-03-18 17:02:30 -0400 com.apple.backupd[4971]: Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/TOSHIBA EXT/Backups.backupdb/Quincy’s iMac size:37
2014-03-18 17:02:30 -0400 com.apple.backupd[4971]: Backup failed with error 2: 2
Maybe you are looking for
-
How to restrict duplicate rows..
Dear Guru's.. I have below query.. When i run this query i need to get two rows.. But iam getting two more duplicate rows.. I want to restrict these two rows.. How can i do this.. Here the problem is when i join B qery then only iam getting duplicate
-
2 lines on family plan now, if we add a third, can we remove one of the other two?
My husband and I have a 2 line family share plan with standard phones (sharing 700 mins/month w/ unlimited text). I'm eligible for an upgrade now (primary line), and he has to wait until June. Our contracts both expire in October. We both want to
-
Pantone books in CS5 vs Pantone Plus books in CC
Hi All, After a recent upgrade from CS5 to Creative Cloud, I created a new graphic using our corporate Pantone Colour (PMS 541u), but when I sent it to (digital) printing, I discovered that it did not print the colour we were expecting. I understand
-
Ssh not responding to the assigned pw
ssh not responding behavely Dont know what security parameter that needs modifying. If I use a the techia ssh, the session between client and server has no problem. but if i use the default ssh server embeded in solaris 10 with techia ssh client, The
-
How to hide tab bar and application bar? In ID CS4.
Hello all! Please help! Maybe someone have idea how to disable both? It is only waste of space imo. Will not use them for sure... Never opening more than 2-3 docs and than can easy use shortcut ctrl+`. Tabbed pages are good in web browser imho... App