I tried to put ios 7 on my ipad 2 but then it took me to recovery mode then I got the new itune and tried to restore it but then it stops in the middle
I tried to put ios 7 on my ipad 2 but then it took me to recovery mode then I got the new itune and tried to restore it but then it stops in the middle
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.
Similar Messages
-
All my playlist are gone from itunes with the new update. If I click on "sync" it asks me to erase all my music and videos... Is there a way to avoid doing this? Thanks.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
In the unlikely event that your media has been wiped from your computer see Recover your iTunes library from your iPod or iOS device.
tt2 -
i do not have a file box in the latest version of itunes,and so cannot consolidate my files to be able to move itunes from one extarnal hard drive to another.i have tried tutorials but all say to use the file button which i do not have and when i go to library it does not open the consolidate file box.can anyone please advise or point me to a tutorial for the latest version of itunes guide to be able to do this as i'm going mad here.is there a step by step guide i can follow?
i do not have a file box in the latest version of itunes,and so cannot consolidate my files to be able to move itunes from one extarnal hard drive to another.i have tried tutorials but all say to use the file button which i do not have and when i go to library it does not open the consolidate file box.can anyone please advise or point me to a tutorial for the latest version of itunes guide to be able to do this as i'm going mad here.is there a step by step guide i can follow?
-
I have a 3G iphone. I just tried to download the new itunes and lost all my itunes I had. I tried to transfer them from my computer but can't. How can I and what do I do to get the ones I bought before and now have lost.
It has always been very basic to always maintain a backup copy of your computer.
Use your backup copy to put everything back.
If for some reason you have failed to maintain a backup ( not good), then you can transfer itunes purchases from an ipod/iphone/ipad: File>Transfer Purchases -
I upgraded my iPad 2 (3G) to the new OS8 and I can no longer connect to 3G. All the settings on the iPad are correct. It just shows that it's searching for a signal. I'm in an area where my signal (pre OS8) was very good in strength. Please help!
Hello Jpahlphoto!
I'm sorry to learn about the issues mentioned in your post. Let's fix this for you OK?
Please restore your iPad and see if that does the trick. You'll find the steps here:
http://bit.ly/16hQAlr
Thanks,
ChristinaB_VZW
Follow us on Twitter @VZWSupport -
I am trying to install the new iTunes and I keep geting the error message "Apple Mobile Device" failed to start. Verify you have sufficient privileges to start system services". HELP
Hey schouten53,
Thanks for the question. I understand you are experiencing issues with the latest iTunes update. Let’s troubleshoot the iTunes installation by completely removing and reinstalling iTunes and all related components (it is important to remove all components in the order listed).
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Additional Information:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thanks,
Matt M. -
I am trying to load the new itunes and I keep getting a runtime error R6034
I am trying to load the new itunes and I keep getting a runtime error R6034
The new Itunes software update is flawed! I had the same issue. You need to uninstall Apple components, then reinstall. Go to this link for instructions. Takes about 20 mins but works!
http://support.apple.com/kb/HT1923 -
I have downloaded the new itunes and now wanting to update my Iphone 3gs to the IOS 5. It just seems to stop whilst backing it up and not completing. My computer is windows 7..
helllppThat's happening to me and I have Windows XL
-
I have been streaming videos and music from my phone and iPad. I just got a new MacBookPro and when I try to stream from it, I get the mirror image, but no sound. ????
Hi Avonbikerider,
If you are only having the audio issue when Airplay Mirroring from your MacBook Pro, you may find this forum discussion helpful:
Apple Support Communities: No Audio when Airplay Mirroring from Mac to Apple TV
https://discussions.apple.com/thread/4167956
Regards,
- Brenden -
Bought the new iphone and tried to restore it to my old iphone settings. It synced some of the old data onto it, but then it froze and continues to. It says to restore it and erase everything, but I'm afraid to lose my contacts. Will the contacts be lost or will they be there when I sync it back up?
Hello timotim56,
This can be achieved by removing the device via iCloud.com
iCloud: Remove your device
http://support.apple.com/kb/PH2702
Cheers,
Allen -
i tried to download the new itunes and i keep getting a message that "the feature i am trying to use its on a network resource that is unavailable
Which particular .msi file does the message go on to say can't be found? (Several different .msi files can be mentioned in this context: itunes.msi, bonjour.msi, AppleSoftwareUpdate.msi, etc.)
-
I have downloaded the new itunes, and updated my ipod. Its not still not letting my sync. What do i do?
If the problem is that iTunes does not see the iPod try:
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
Otherwise provide informat at to what happens when yuo try to sync. Errot messages? -
I just upgraded to the new iTunes and now my playlists are jumbled when I print them.
I just up graded to the new iTunes and now when I prints playlists, they are jumbled. It's not my printer...........only happens on iTunes.
Hi kevin n tracey,
If you are having issues with iTunes after an attempted update, you may find the following articles helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
- Brenden -
My laptop was stolen and I need to be able to connect my iPhone4 to the new laptop and transfer content (photos, mp3's, apps etc.) to the new laptop. I'm afraid to try a sync in case it deletes all the content off the iPhone. Any suggestions?
You should be importing all pics taken with the iphone to your computer regularly as you would with any digital camera.
iOS: Importing personal photos and videos from iOS devices to your computer -
I just downloaded Firefox 5 and it said that my Yahoo toolbar will not work with it. Is this true? If so I will not use this new version and will switch to another browser if Firefox stops supporting the Yahoo toolbar. Thank you.
Add-ons contain a range of compatible Firefox versions, and Firefox honors the listed range by disabling the add-on if you are trying to run it on an unlisted version.
I'm sure Yahoo! will update its toolbar eventually, but not every add-on maker supports beta versions of software.
Maybe you are looking for
-
Integrating CRM On Demand with EBS (12.1.3) using BPEL
Hi, I am working on POC for the integration between EBS and CRM On Demand. We are EBS R12.1.3 and have SOA Suite 10g. We are planning to use BPEL to do this communication between EBS and CRM OD. Is this something that is possible using BPEL. In addit
-
I have a problem while installing 9iAS R2 on RH LInux 8. When database configuration assistant starts during the installation of 9iAS infrastructure, it gives an error "Error creating CONTROL FILE" followed by many other errors. Please help me out. Z
-
Sticky arrow keys on T510 all of a sudden?
Hi Out of nowhere my Arrow keys and the two keys next to the up arrow have become very sticky. By this, I mean they dont press as smoothly and freely as they did, and they take much longer to return to completely unpressed. They feel spongy! they
-
Flash Builder 4.7 conditional compiling failed
I installed Flash Builder 4.7 on my windows xp machine, and tried to migrate projects from FB 4.6. However in one of my projects I use conditional compiling, but I'm getting errors.For example in FB 4.6 I have this sample code: public class MyClass{
-
Is there a call history command in Soloaris 10?
Is there a command to run before commands? such as $ls $gcc test.c $ /*here,I want to press up arrow or left arrow key to show history command,such as gcc test.c or ls,I remember FreeBSD can do it,how to do it under Soloaris?*/ Thanks