I tried to remove the rotation lock, it is not off but the screen still will not rotate. Any suggestions?
i tried to remove the rotation lock, it is not off but the screen still will not rotate. Any suggestions?
it is not off but the screen still will not rotate
Well, if it's not off, that means it's on. So naturally it will still not roate.
Similar Messages
-
Facebook app is blocked on "waiting..". I tried to close the app firstly but it doesn't appear on the multitasking. I tried the normal and the hard reset. I tried to move the app in another group with itunes but it is still in "waiting". Any suggestion?
I can't! Tried to deleteit from the iphone and from itunes but the X doesn't appear!
-
I had to replace my Iphone 5c with a new one. Now, my windows 7 pc does not recognize my iphone. Reinstalled itunes. Apple mobile device is running. I did whatever I could find on the internet still no luck. Any suggestions? Thnx
You have done everything verbatim included with this link?
http://support.apple.com/kb/ts1538 -
I have purchased the VGA Connectors for both a iMac and Macbook Pro so that i can connect my promethean board projector to the computer and I can not get the image on the screen. Does anyone have any suggestions?
Irelandbound wrote:
thank you, I have the adaptors so glad that would work. I just heard adaptors burn out often. So Just thought for my main iMac computer, a plug would be best. I will get one once I move.
Any other suggestions or things I should know about apple products in Ireland. I know there are no Apple stores there.
An adaptor doesn't burn out. It merely serves as a means to connect the power prongs on your device to the power supply.
I believe you are thinking of a transformer, which you do not need. A transformer converts one voltage to another.
You don't need to do that as the power supply of modern electronics can take almost any worldwide voltage.
Look at the label on the device. It should indicate the input power acceptable of 100-240 VAC, 50-60 Hz.
Additionally, I found the adapters cheaper in the UK than I found them in the US. They were available in most supermarket chains. I wasn't in Ireland, so I can't say one way or the other.
If you have something that doesn't have that input power spec, it would require a transformer.
On other items like electric clocks or things with motors, you can connect them up to a transformer and the voltage will be correct, but the frequency may not. For clocks, that will cause them to not keep time well. For motors, they will burn out. -
I am physically disabled and having trouble selecting apps because of the sensitivity of the screen - any suggestions on what to do?
I would think assistive touch would be exactly what you are looking for. It's engaged using the Accessibility method I described above.
Here's the writeup about assistive touch from the iPad User Guide:
AssistiveTouch AssistiveTouch helps you use iPad if you have difficulty touching the screen or pressing the buttons. You can use a compatible adaptive accessory (such as a joystick) together with AssistiveTouch to control iPad. You can also use AssistiveTouch without an accessory to perform gestures that are difficult for you.
Turn on AssistiveTouch: Go to Settings > General > Accessibility > AssistiveTouch. To set Triple-click Home to turn AssistiveTouch on or off, go to Settings > General > Accessibility > Triple-click Home.
Adjust the tracking speed (with accessory attached): Go to Settings > General > Accessibility > AssistiveTouch > Touch speed.
Show or hide the AssistiveTouch menu: Click the secondary button on your accessory.
Hide the menu button (with accessory attached): Go to Settings > General > Accessibility >
AssistiveTouch > Always Show Menu.
Perform a swipe or drag that uses 2, 3, 4, or 5 fingers: Tap the menu button, tap Gestures, and then tap the number of digits needed for the gesture. When the corresponding circles appear on the screen, flick or drag in the direction required by the gesture. When you finish, tap the menu button.
Perform a pinch gesture: Tap the menu button, tap Favorites, and then tap Pinch. When the pinch circles appear, touch anywhere on the screen to move the pinch circles, then drag the pinch circles in or out to perform a pinch gesture. When you finish, tap the menu button.
Create your own gesture: Tap the menu button, tap Favorites, and then tap an empty gesture placeholder. Or, go to Settings > General > Accessibility > AssistiveTouch > Create New Gesture.
Lock or rotate the screen, adjust iPad volume, or simulate shaking iPad: Tap the menu button, then tap Device.
Simulate pressing the Home button: Tap the menu button, then tap Home. Move the menu button: Drag it to any location on the screen.
Exit a menu without performing a gesture: Tap anywhere outside the menu. -
When i put the switch on silence the phone still rings...any suggestions/help on this question
I flip on my silent switch and the phone still rings on my iphone 4....any suggestions/help is greatly appreciated
Try a Reset,
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release the buttons...
http://support.apple.com/kb/ht1430
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf -
I have switched computers with my daughter. I have been trying to use my itunes account and not hers. I went through the uninstall process and reinstall of the program and signed in under my name and password. After dowing all that the content was hers and not mine. Does anyone have any suggestions
Not sure what displaying her music has to do with it. You would have to delete her music if you want it gone. That has nothing to do with the issue of your music.
If you want your music, then copy it from your computer to hers.
You can redownload some itunes purchases in some countries:
Download past purchases - Support - Apple -
Helppp
Hi ayeyoo,
All Apple products come with limited warranties. Here is a link to the Apple Support site that will provide you with information on what your warranty covers, and how to get support:
http://www.apple.com/support/contact/
Cheers,
GB -
Can't remove the screen lock by PIN and can't use the screen to receive calls
Hello, I have a brand new SONY Xperia , Model Number D5803, Android version 5.0.2. , Baseband version 8974-AAAAANAZQ-00063-42, Kernel version 8974-perf-g3f600d1. , Build number 23.2.A.1.62.
I set a screen lock by PIN. However when I receive calls I can’t take them, because the screen in locked.
I tried to turn off the screen lock, but when I select the “ Screen lock” menu and after entering the correct PIN, the following items are not active “None”, “Slide” and “Pattern” . So I can't select “None”
The only active items are “PIN” and “Password” .
Please advice how to remove the screen lock by PIN. I hope this will help to be able to receive calls.
Thank youTo enable None and Swipe options, you need to go to Settings -> Security -> Clear credentials. Then those options will become active again.
However, you should be able to take calls even when you have PIN security, can you describe what shows on the screen when you have an incoming call while screen is locked?
A proud Sony User since 2002
If I was helpful to you, thank me by Kudos -
I am trying to remove a card and i do not see the none button , how do i remove it from my iTunes
i am trying to remove a card and i do not see the none button , how do i remove it from my iTunes
The following support documents have some information that may help:
See the section titled "Change your payment information on a Mac or PC" http://support.apple.com/kb/HT1918
If you still cannot select "None" http://support.apple.com/kb/TS5366 -
I am trying to remove the older version of iTunes but an error message appears saying that it cannot find the path to 'iTunes64.msi", and I tried the search option to find it on my computer but no such luck. Please help me
Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over. -
Why is my diabled login greyed out after i unlock it? I have tried to remove the library file but it doesn't work. It worked the first time and than all of a sudden it was greyed out.
Where do you see a disabled login? In system preferences? In Login screen?
-
i plugged in my iphone 5S and locked the screen 20 minutes later I tried to open the phone it will not turn on i treid reset and that wont work I have a black screen,
I tried just holding down the power key...NOTHINGDo a reset, hold down the home/sleep button together until you see the apple logo and then release.
-
I am trying to remove the backup encrypt for my Iphone 4 but the itunes ask for the password and basically I have not set any password before ...!!! Please note that I entered the password for my apple account and also it did not work, how i can reset it?
You can't reset it. If you don't konw the password then you can't use that backup
-
I'm trying to remove the search bar from the menu, but when I try it removes the navigation bar as well. Mozilla's help page shows there being a button to remove in the customize menu section, but it's not here so is there any other way to remove the search bar?
Hi Ashley Clavette,
The Initial view setting works perfectly when the file is opened in Acrobat after setting the desired Initial View.
When you upload the file onto Wordpress, and view it on that website in the browser...it might be using a different pdf handler program which might be causing this issue ( it would be helpful, if you could provide the screenshot) , however when you download the pdf again from wordpress server...and open in Acrobat/Reader...then what exactly happens ? Does the pdf opens in the desired Initial View setting?
Rahul
Maybe you are looking for
-
Summarized JIT calls via email
All: We have configured summarized JIT calls to email to vendor which are currently sent daily by batchjob using RSNAST00. We have another vendor that we would like to summarize only once per week. The problem is that RSNAST00 is by output type. I s
-
Define Time-Based Fields for Cost Centers
Dear All! I would like to know , how I'm abale to cahnge the setting of business area for Time-Based Field of Cost Centers to period Transaction is OKEG Would be thankful
-
I've installed ndiswrapper and loaded the .inf file it said hardware and driver present. I can iwconfig and see my connection but I can't iwlist wlan0 scan, it says no scan results. I can't seem to set the ESSID, it is called default, I called it lik
-
Show all Columns with datatype = date
Is it possible to select all columns with datatype = date in the Repository. We like to cast it like dd.mm.yyyy. Regards, Stefan
-
I can not update from FCE 4 to 4.0.1 THanks