I tried to rent a tv show today and discovered the rent buttons are gone. What Happened to them?
I tried to rent a tv show today and discovered the rent buttons are gone. What Happened to them?
Apple removed TV show rentals, citing lack of customer interest (ironic, I know).
<http://www.appleinsider.com/articles/11/08/26/99_cent_tv_show_rentals_quietly_re moved_from_apple_tv_itunes.html>
Similar Messages
-
Help. I tried to open my Illustrator CS6 today and got the following error message, "To open Adobe Illustrator CS6 you need to install the legacy Java SE runtime". The window then states, "Click More info...to visit the legacy Java SE 6 download website." I do click on the More Info... button, but the webpage is blank. Please help.
Thanks,
LeoLeo,
Depending on your OS, you should be able to use;
Win:
http://www.oracle.com/technetwork/java/javase/downloads/java-archive-downloads-javase6-419 409.html
Mac:
http://support.apple.com/kb/DL1572
Some have found that the page may turn up blank to start with, so it may be necessary to reload the page.
Others have found that it may depend on browser. Specifically, a switch from Safari has solved it in one case. -
I recently did the 5.3 update to my Apple TV and now it is running sluggish and things keep freezing and then pictures are loading on top of each other. Then I did a hard reset today and now the WWDC app is gone. Anyone else having these issues?
I have been having problems with my atv 3 not transmitting/receiving 5.1 surround. Whether I stream from my computer or watch movies, I am getting no 5.1 audio. The atv won't even show the option for surround. I tried to restore and reset the device but it didn't help.
I haven't had any problems with missing apps or freezing or anything similar to what you are experiencing. This update has many bugs. Other threads have reported even more problems. Hopefully I can go back to the previous update. -
I updatediPhoto today, and now all my pictures are gone
I updatediPhoto today, it was trying to convert my old iTunes Library(2), it was about 25% done, and then it just disappeared. I cant find the old Library (iPhotolibrary2) anywhere. It seems it got thru the conversion partially, and now all my pictures are gone. I can find iPhoto Library, but not iPhotoLibrary2, which has all my photos on it
Are you confusing iPhoto and iTunes on there?
Easiest solution: restore from the back up you made prior to upgrading. -
Help
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Yes, I see ambiguity. I also have some old backed up profiles and I have 3 profiles showing under the Profile Manager. The folder under "%APPDATA%\Mozilla\Firefox\Profiles\ " shows 2 of them, but HOW do I determine WHICH ONE is my current profile?? So far I was unable to browse up a clear answer. Thx.
Somehow the newest Profile ''(Profile 2)'' ended up in the \Profiles\ folder instead of in it's own Profile folder which would have a name similar to the other two Profiles - 8 alpha / numeric string ''followed by'' a suffix, ''either Firefox assigned or user specified, like JP1''. <br />'''Default=1''' indicates the "active" Profile so we know that is the most current Profile.
<pre><nowiki>[Profile2]
Name=JP1
IsRelative=1
Path=Profiles
Default=1 </nowiki></pre>
''Sorry, I need to break now for dinner right now, be back in 1/2 hour or so.'' -
I've reset my network settings. I've cleared cache and cookies in the browser. Before yesterday the login screen would appear anytime I attempted to use an app or program that required internet access. Pretty much every program. Now I have a brick tablet at work. I've reset everything I can find. I'm at a dead end.
I've seen other ipads that had the auto login togle and auto join togle under network selection, my ipad does not have those options. Logging in at home is working fine on my private network. This public network is not being reset or forgotten when I choose "forget network" or Safari is blocking the login page and I don't know how to un block it.Well, when I join a public wifi, a log in page displays a few seconds later, displaying the user agreement. But, earlier today, I was trying to connect my friend's 3GS to a public wifi, and it did not show up. So. I don't really know what happen. I think you should toggle the auto Join to on.
-
If my Adobe Muse and Air apps are both up to date (as of today) and I cannot open a Muse file, what are my options? While Muse is relinking assets I get an error message regarding the Progress Window "showing" and then Muse crashes.
Hi there,
Do you get this error while opening a particular file or all files?
Please try opening a different .muse file, and check if it does the same?
Ar you opening a .muse which is saved on a network drive?
Thanks. -
I updated my iPhone 3G today and after the update it said on iTunes that my sim was not compatible and my iPhone screen went on to slide for emergency/connect to itunes. Ive tried restoring it but it hasnt worked. Please help!
Unless the iPhone was purchased as unlocked very recently directly from an Apple Store (the only place in the US where unlocked iPhones are sold, and then only since June), which from the symptoms I doubt is the case, then it was locked to AT&T and jailbroken to make it work with an Irish cell carrier. Updating the operating system has now relocked the iPhone back to AT&T.
Only the cell carrier can institute an official unlock, one which will hold across updates of the operating system, and AT&T will not do so for any reason. All we can advise here is that you return the iPhone to your uncle and purchase an iPhone there in Ireland.
Regards. -
Bought an app last night. Tried to buy another an hour later and got the window that says "Cannot connect to iTunes Store". Still unable to connect to store today. Tried restarting router. Help please....thanks.
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
Cheers, Tom -
I tried to restart my 2009 iMac today and the start up chime happened, the apple appeared, and the circle started spinning... and then it just kept spinning. It would never folly boot up. Any suggestions?
Could be a hardware failure such as a HD going south. Please carefully read and follow the suggestion Apple provides in Gray screen appears during startup.
-
my iphone 4 turned black today and my sleep(lock) button doesnt work. I have tried to let it charge to see if it would restart but still nothing. what else can i do to turn it back on??
Unless somebody else has a micracle workaround I don't know. Probably get the phone in for repair since it has been living on borrowed time so far and now you absolutely must have a working button.
-
I'm trying to burn an iMovie in iDVD and at the end of the whole burn process it says "Multiplexer Error" "there was an error during formatting". How do I fix it so that it'll burn?
Hi
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W -
My husband recently tried to sync my ipod to itunes and in the process he managed to loose all the photos I had stored on the ipod. When I go to my pictures folder on my (Dell) laptop there is now a folder called ipod photo cache. How do I view these files? They are now show as ITHMB files!
Those photos taken or bumped photos should bi in the iPod's Camera Roll album
- If they are in an iPod backup then restore from that backup. Note however, that the the backup that had the photos may have been overwritten by a subsequent backup that did hot have the photos on the iPod.See the restore topic of:
iOS: How to back up
- If you used PhotoStream then try getting them from your PhotoStream. See that topic of:
iOS: Importing personal photos and videos from iOS devices to your computer
- Have you looked on the computer? Maybe they were imported to the computer and then deleted from the iPod. Since the photos were not synced to the iPod they are not in the iPod Photo Cache folder . -
my ipod screen has went white i have tried plugging it into itunes and pressing the home button and top button together for 10 seconds but it wont work!! this has happened twice before already and i havent even had it a year yet, i should have listened to my sister and never have bought one!!! someone help please ?
- Connect to computer and it it shows in iTune restore via iTunes
- Then try letting the battery fully drain. After charging for an hour try the reset (both buttons) and connecting to computer and restore.
Maybe you are looking for
-
HT1435 ipod not charging and windows says usb device malfunctioned. Any Ideas?
alright so i have the ipod connected to my windows laptop however, ipod asks to be plugged into a power supply. windows says "the usb device plugged in has malfuctioned, and windows does not recognize it" Has anyone ever encountered anything similar
-
Songs no longer on iPod; how to safely sync?
I did an iTunes sync between my iPod Classic 160 Gb and my MacBook Pro as usual. Except that it didn't go as usual. The music is still there on my computer but the iPod has no songs on it. My iTunes is 11.0.4 which it says is the latest version. I'm
-
The new ITunes software for Windows, ITunes vers. 11.0.1.12, is extemely clumsy for managing my IPhone 4. The help material is designed for the older version so is of no use. The interface is extremely difficult to use except for buying music or vi
-
Unstable airport card connection
Perhaps I have a buffering problem, if I knew what buffering is. My 9.2 iMac with Airport card was set up as the base station for the household iBook and was itself hard-wired to my DSL modem (Qwest ActionTec). Everything worked fine for months. Rece
-
User event or event structure time-out
Hi, I have two VIs one is a producer, one consumer. The consumer VI is called programatically (i.e. not wired) when the producer VI is run Both have user interfaces using an event structure. I have a control on the producer that i wish to use to trig