I tried to reset my Iphone 5 from the phone and not a computer. I have had a blank screen with the apple logo and a full progress bar for over an hour. I cant turn my phone off because the button on top is not working.
I tried to reset my iphone 5 from the phone and not a computer. I have had a blank screen with the apple logo and a full progress bar. I can not get my phone to restart. What can I do?
Sorry i meant iOs5 to ios 5.0.1
Similar Messages
-
nephew had mutliple tabs open and shut down the iMac by hitting the button on the back instead of closing everything corectly. Now the only screen i get is the white with apple logo and the loading circle icon. i have attempted restart and c key with disk in but cant even get a menu to come up. What can I attempt from home before having to haul this into the store?
wireless keyboard and mouse were working prior to safe mode attempt, i was able to eject disk. still waiting on the safe mode restart. I'm not sure what I should be looking for to confirm safe mode and what the screen should look like if successfully processing. it seems to be putting off a lot of heat. BRB
Message was edited by: FeydakeeeeenHelpMePlease -
Help, got an iPad 2 and it will not turn on? Just got a blank screen with a apple logo. Tried restore (I.e. holding down both buttons for 10min) iTunes also does not recognise iPad when connected to mac?
If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
-
While updating my MacBook Pro to the newest software, it froze with a grayish screen with a Apple logo and a frozen pinwheel right below it. What can I do to finish updating or to fix this problem?
We can't help you if you don't even know what you are installing. Never install anything if you do not know what it is. Installings through Software Update always have explanations which you should be reading to see if you actually need and/or want them.
That being said, it appears you attempted to upgrade to Mavarick. Although I am not positive.
Sorry, I am going to back out of this because I nor you know what it was you installed. Hopefully, someone else will chime in here.
GOOD LUCK! -
I am going to sell my second generation ipod touch, so i resetted it to factory defaults. It said it would take up to an hour, and i patiently waited. But when the black and white loading bar completed, the ipod went to the black screen with an apple logo on it. Sounds about right, right? But now, there is a processing circle on top of the logo, but the circle spins once, and stops at about halfway to the bottom. It just stays there, and about every half to one hour it becomes a white screen and starts all over again. (not the loading bar part, just the circle). I've tried holding the power and the home button, and it works, but it just goes back to the circle screen with the apple logo. HELP PLEASE?
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
HI
this happened today suddenly while i was working on my iPad it kicked my out of the app that i was using then white screen with black apple logo came out, i thought it was an ordinary thing cause this happens all the time with me, but this time it refused to turn on! After the white screen with the black logo vanished i wad waiting for my lock screen but no, a black screen showed up just like that! And could tell it was black "lighten" screen i tried more than 10 times to do the home+power thing but it wont work, whats wrong with my ipad!If the battery is completely drained it may take some time while on the charger before the iPad responds. Plug the iPad into the charger that came with it and plug that into a good wall outlet. Wait one hour. Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. If the iPad restarts let it continue to charge until the battery is 100%. If it doesn't start up make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support. They will examine your iPad and explain your options.
-
i have ipod 2nd generation 32 gb and i had reset > Erase All Content and Settings it is longer than 3 hrs it is still showing apple logo and blink like if it will restart but again it shows the same logo!! is it all right with the erasing...??? i am confused!!
For a 1G and 2G it can take hours. Make sure it is connected to a charging source otherwise the battery can fully drain before it is done. If still problem
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
ipad 4 frozen during update ios 8.1.3. - did anybody know how to restart (or reset) my ipad4 from black screen with white apple logo?
Hi there did you end up getting this resolved? I have the same exact same issue with my Ipad 4 when updating to 8.1.3....frozen on the apple logo. Tried resetting as advised by other users but just goes back to the same logo. Tried connecting to iTunes but device is not picked up at all. Left it over night to run flat hoping charging might kick start something....but when I put on the charger it shows the battery charge icon but won't actually charge it. It's really doin my head in trying to find a fix - cheers Morgan
-
I did the back up as instructed... Installed a larger hard drive and followed the restore instructions... Now I get a white screen with a folder icon and blinking question mark. When trying to set startup with new drive I get a bless tool error... Help!!
If you have installed a new hard drive , you will need to have formatted it in Disk Utility correctly. This may explain your problem.
Boot into your 10.6 Install disk again at the top menubar > Utilities > select Disk utility and in there select your new hard drive, and select the tab Erase and choose to make the format as Mac OS Extended Journaled. When that is finished look in the main window to make sure that the partition map scheme says GUID Partition Table.
Now go to the Restore tab and reinstall from your backup. -
with brand new iphone 4s when plugging into computer itunes shows a blank page with an apple logo in top left and a small lock in the top right. right clicking iphone under devices shows only eject.
Having same issue here:
https://discussions.apple.com/message/19043181#19043181 -
my i phone 3gs showing black screen with sillver apple logo before this happened i choosen delete iphone option plzz help me....plzzz
my i phone 3gs jst showing black screeen with appl e logo frm last 1 hour watto do...?
-
I did an auto software update on my iMac, which included a restart. When the machine restarted it's stuck with an Apple logo and spinning wheel. I've tried all of the key strokes that are supposed to work, but nothing has. Any suggestions?
Gray screen could be any number of things, bad third party at boot kext file, a bad Apple one, a bad install/upgrade of OS X, drive corruption etc.
Run through this list of fixes
Step by Step to fix your Mac -
Stops responding, showing the Apple logo with no progress bar or a stopped progress bar, for over ten minutes
First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
-
I start my new iPhone 5s 64 for first time , no hello screen , only white screen with black apple logo
How can I start my iPhone (I already did restart - it didn't help)Did you activate the phone already?
-
I not so recently changed my email adress I associated with my Apple ID and my iCloud ID. My old email still shows up for iCloud, and won't let me change it to my new email. When I try to delete it and replace it with the proper email, it wants my password, which it won't accept because it's an invalid username.
I had this same issue and got it resolved very simply when I contacted Apple SUpport
Go to https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/ and sign into your infomation
> Go to Manage apple id and primary email address
> Change it to the old apple id that your device is asking for
> Save changes
> Go to Settings > iCloud and sign out of the infomation
> Go back to https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
> Change it back to the correct apple id
> Go to the email address adn reverify the apple id
> Sign back into iCloud on your device
> Smile
Article to back up my statement http://support.apple.com/kb/TS5223
Maybe you are looking for
-
Questions on the Big Bang xpower x58
Got a question on this board. Is there a way to keep the "Intel Turbo Boost" enabled without having the "EIST" on auto or enabled? Or does the "auto" default to disabled? I have bios ver. 1.4
-
Problem creating a new listerner
I have a problem in creating a new listener in oracle 10g.I have oracle 10g DB installed on redhat linux as 4.I have deleted my preveious listener because it was not succesfully started when i restart me mechine. i have stopped all related services t
-
Printing too contrasty and saturated in CS6. How to correct?
i have just upgraded from Mac OS 10.5 and CS5 to Mac OS 10.8.4 and CS6 printing on Epson 9880. Struggling to get calibrated prints - before it was excellent. Now printed images are WAY contrasty and saturated compared to the monitor, a LA Cie 324, wh
-
Is it possible to merge Wikis?
Is it possible to combine two Wikis together - if so what do you need to do to ensure this works OK?
-
I receieved an error code (6) as I was updating to IOS 7.. what do I do?