I tried to restart my computer, now it is restarting over and over
Hi,
I re-started my computer and it wouldnt start, it just keeps restarting al by itself. i managed to get one of the SuperDrive drawers open and inserted the 10.5 disk trying to start from the CD.
its been doing this for over an hour
Hello there,
I am an Apple care tech lead.
Here is the article for the first step in troubleshooting this issue.
http://docs.info.apple.com/article.html?artnum=106214
Booting to the disk is the first art you have to repair the disk with dusk utility (not the permissions)
Let me know how it goes..
Similar Messages
-
I'm trying to install Adobe PS CS3 for my boss on an other computer. I put the Program on a hard disc and copied it to the other computer now it won't open and says it needs the license. What can I do to make it work on this computer?
Copying the program over to a new machine will not work. Install it using installation files and activate it using the serial number assigned to the license.
CS3 - http://helpx.adobe.com/creative-suite/kb/cs3-product-downloads.html -
i recently changed my wallpaper and when i was on safari the rainbow wheel popped up and i had to restart my computer, now theres no wallpaper it just a grey denim and when i try change the wallpaper only the tool bar changes not the background, help ?
Hi. When you were in the recovery drive doing permissions, did you try and run a repair of the boot drive? Did you try single user mode? Try these first and then go back and try to reinstall the operating system.When I say repair boot drive I don't mean permissions. There are both options in disk utilities.When you open disk utilities ,you will see in the left column two drives plus possibly a boot partition that look like an external driv. click on the second drive and in first aid use repair disk. If you still can't boot and it will not let you restore, you may have to do a clean install. http://support.apple.com/kb/PH18869?viewlocale=en_US
-
I have a brand new i phone 4s and i have updated the soft ware to the 5.1 and tried to restore it to download my old contacts and apps etc. and my computer now wont recognise my phone and itunes will not do anything can any body help please???? i need this sorting asap xxxxxxx
see if this link helps http://support.apple.com/kb/TS1538
-
I can't open firefox after upgrading to 4.0
I get the message over and over again that i have to restart my computer for upgrading to firefox.
I tried new installation. But i got problems on all my accountsStart your '''Computer''' in safe mode. Then start Firefox. Try '''Safe''' web sites.
Starting The Computer In Safe Mode;
If running, turn your computer off.
Remove any disks and thumb drives that are in your hard drives or ports.
Now start your computer but also;
'''Windows; '''Press the <F8> key repeatedly.
'''Mac: '''Hold down the Shift key.
'''Linux; '''Using the command line, Linux/Unix computers can be booted
into various run levels that determine which resources are loaded.
For example, "runlevel 1" is typically the equivalent to Windows and
Mac safe modes.
* Source; '''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Safe Mode; Free Online Encyclopedia]'''
When the '''Boot''' menu is displayed, release the key you were pressing.
You must now choose what mode to use. The most used are;
* Safe Mode; The computer runs with only a minimum set of programs.
* Safe Mode '''With '''Networking; Same as above, but with internet access. -
I just purchased a MacPro with 10.7.2 installed. I want to install 10.5 on a separate partition.
I created the partition with no issues, now when I put in the 10.5 install DVD and restart the computer, it does not restart.
All I get is a grey screen. no icons, no nothing. I have to shut the computer down.
I really need to do this. I plan on upgrading to FCP X, but I still need to finish some old projects that were done with FCP 7. I need the different boot drivesMac Pro - Mid 2010
Processor 2 x 2.66 GHz 6-Core Intel Xeon
Memory 8 GB 1333 MHz DDR3 ECC
Graphics ATI Radeon HD 5870 1024 MB
Software Mac OS X Lion 10.7.2 (11C74)
This is a brand new machine that I just purchased from Apple. It was delivered yesterday
The old computer is an old PowerMac G5, but my OS X install disc is a retail version of 10.5.
I also tried the OS X 10.5 install disc that came with my MacBook Pro (2.6 Ghz Intel Core 2 Dual).
Same issue - nothing but a grey screen when the system tries to boot from the DVD -
I received an update message after my system had installed the newest Firefox 3. something, approximately 4 days ago. (Today is 3/22, so about 3/17--18) The newest update , when started, took me to the Mozilla homepage, where It was suggested I download and comment on the new Firefox 4---I do not normally do this, but am so impressed with Firefox versus most others, that I did, now, I cannot open Firefox at all, the older version, 3. something, is not in my system, only 4, but my system/PC upon trying to open the new Firefox, prompts me over and over to restart the system, (which I have done 3 times) I figured I would then simply remove it, (Firefox 4) and either try it again, or re-install the newest 3. something---I cannot remove it, even using my anti-virus program to do so, it simply prompts over and over to restart, wether I try to open, remove, or access it in any way---I do not wish to use system restore, but that seems my only option, please help!!!
I had the same problem and the solution is quite simple:
- delete all data that has to do with Firefox and Mozilla
- Reinstall the new version Firefox 4
You have to make sure that everything is deleted and well yes you will lose your profile data but at least it works again without any problem. -
Trying to update my software (iPhone and iPad) it says my iTunes software needs to be updated, but it is already is. I try this over and over again. I've already reinstalled iTunes and have shut down and restarted my Mac several times. How can I fix this?
This is what worked:
"In iTunes, I signed out of the store. I exited itunes and restarted it, logged back into the store (with my apple id), then I pulled down the iTunes menu in the menu bar and selected Check for updates.
At this point it said that iTunes 11.1 was available and I'm downloading now " Quoted from a fellow user.
It fixed my problem. -
First I did the update under general like I do every couple months. My phone came up with a screen, at the end of the update, that had a picture of the itunes icon and a picture of the iphone cord like I was supposed to connect to itunes. I did and itunes said that my phone needed to be "restored" to be reusable again, and the only option it gave me was to click the restore button. So I did and it went through a 30 minute restore session. Now my phone just shows the black screen with the apple icon and restarts over and over again. Clicking the buttons does nothing. It has been doing this for hours now. What do I do?
The screen is telling you to connect the iPod to your computer and restore via iTunes.
iTunes: Backing up, updating, and restoring iOS software -
I just bought v10.7lion but when I try to install it comes with this error message:"Install Failed"...try to install again. Now I've been restarting over and over again. What should I do?
JPPI-
Did you try it with the iTunes your Mac already has?
Try running Software Update in your System Preferences. That should bring your computer up to the latest software available for 10.4. You would end up with an older version of iTunes, but that may be good enough to activate your iPad.
Fred -
Trying to download cc installer over and over again and now the website link is down
I've been trying over and over again to run CC installer for my trial, it made my computer crashed after it installed (I had to do a system restore to before it installed) then I ran all of my updates but as it begins to download it the program stops. If I run it as administrator I get a message saying it "failed to initialize". I deleted the program and made sure it wasn't installed but now when I try to re-download it from the website it says that they're having technical issues.
my question is there anyone else seeing this message on their site about a technical issue?
and what can I do to try and get CC installer to initialize? I have windows 7 if that helpsForget the chat support. I am trying to install the CC Installer since 6 weeks. I had 18 emails going back and forth so far, I had 7 contacts to the chat support and I had two contacts with the local telephone support - The outcome is very easy to say: Adobe Support is simply totally incapable of helping me to resolve my problem. The CC installer is still not installed on my Mac which is why I will now cancel my subscription, look to get my money back because I was never able to use this Adobe crap, and I will move on to products that the Adobe competition has to offer, that are cheaper and easier to install. I was very pleased with the performance and the handling of Adobe Photoshop CS 4, 5 and 6 and Lightroom 3, 4 and 5, but hell, the Adobe Creative Cloud can kiss my *** since I cann't install it anyway..
-
I tried to download the upgrade, now it won't install and I can not access my documents. It said Vi did not have enough space for the upgrade so I made room but still no luck. If I delete the ap and reinstall I will lose my stuff. Any ideas? It won't open so I can email it to myself.
What upgrade are you trying to install? Your profile shows iOS 5.1.1, which is the current max iOS.
Cheers, Tom -
just bought a new iphone4 and was loading os6 and now it won't turn on. the apple glows like it is starting up, then the screen goes black and then repeats the same process over and over. i have tried to reboot multiple times now
I am assuming the phone was working prior to you installing IOS 6? Did you use itunes to install IOS 6 or just run from the phone?
When I tried to do the Over The Air update to IOS6 on my iPhone 4, it errored out and I had to connect it to iTunes and select "Restore" from the summary screen after iTunes finds the phone is connected. If this works for you, it will go through a couple of reboots that take a few minutes to complete. It should then give you the option to start with a fresh new phone or to use one of your previous backups to load your contacts and other information, provided you have backed up the phone previously.
I hope this helps you my friend! -
Both Chrome and Finder seemed to freeze, so I restarted the computer. When the restart finished, I was in recovery mode. How do I get back to my regular login screen?
It starts up and asks for a language. After English, it goes to the OS X Utilities screen. I have gone to disk utility and verified the disks. They both say they are okay. If I click repair, it comes back with an error saying "Live file system repair is not supported." I just want my computer back to normal! Please help! I am still in Mavericks if it matters.Do you have a backup? If so, in the Recovery Partition go to Disk Utility/Erase, select Mac OS Extended (Journaled), click Option GUID, and erase the disk. Then re-install the OS. Reboot and use Setup Assistant to recover your data.
-
I just purchased my macbook pro yesterday and the update combined it downloads but when i restart the computer it says something went wrong and it won't work i don't know where to start to download this update
Try here:
http://support.apple.com/kb/DL1524
Maybe you are looking for
-
How to show more than one Currency Symbol on Query
Hi Guru's, I've to bring multiple currencies on one single report and the report should look like this: Sales Figure:- Region SalesQty Revenue Currency EAST 10 $ 1,000.00 USD EAST 7 20.00 (but with Euro sign) EUR EAST 2
-
Dear Friends, We are developing output for Debit memo/credit memo by using Smart form.(RVINVOICE01) How it will link to customer/vendor. Regards, Ram
-
I need a sample SOAP over JMS project for JDeveloper
Does one exist? I am using version 10.1.3.3 of JDeveloper. From everything I have read the only way to do Async Web services for consumption by Oracle's BPEL engine is to do them using JMS. Any information would be appreciated. Have a great day. Terr
-
CPTD Error during actual template allocation
Hi, When i am trying to do CPTD (Actual template allocation) i am getting the belwo error message System status CRTD is active (ORD 1094052) Message no. BS013 Diagnosis Object ORD 1094052 has system status CRTD (Created). According to this status, t
-
After applying 'pacman -Syu' today I no longer have a local printer on my system. Did I miss some message during my 'pacman -Syu' today about having to change some configuration?