I tried to send a mail message to too many addees. when the rejection came back "cannot send message using the server..." the window is too long to be able to see the choices at the bottom of it. how can i see the choices at the bottom of that window?
I tried to send a mail message to too many addees. when the rejection came back "cannot send message using the server..." the window is too long to be able to see the choices at the bottom of it. how can I see the choices at the bottom of that window?
I tried to send it through gmail and the acct is a POP acct
I'm not concerned about sending to the long address list. I just can't get the email and window that says "cannot send emai using the server..." to go away. The default must be "retry", because although I cannot see the choices at the bottom of the window if I hit return it trys again... and then of course comes back with the very long pop up window that I cannot see the bottom of so I can tell it to quit trying...
Similar Messages
-
"This message cannot be sent at this time." I have been getting this pop-up for 3 days when trying to send out mail. I don't know what to do! I cannot send mail from this account on any ISP. Please help!
lots of people seem to be havgin a problem sending email from iCloud webmail.
does your email address have uppercase characters in it?
if so, try creating an alias in lowercase (go to preferences in iCloud webmail and select 'accounts') and see if email sends okay from that -
I can see photos on my iPhone iOS5 only vertical, how can i see them in orizontal?
i can see photos on my iPhone iOS5 only in vertical way, how can i see them in orizontal?
Welcome to the Apple Community.
Photostream when enabled will only add photos from the camera roll that were taken post photostream activation. (Photostream does not currently share video) -
On a Lenovo laptop, completed the download and restart and got the video which proceeds very slowly because this is Africa! I have learned never to watch videos here because it blows all my modem credit in a short time. Now I don't seem to have Firefox 4 on the computer, but the previous version is there, though unpinned from the TAskBar.
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN ) -
just recently i am unable to send any sort of e mails from my i phone using my aol e mail account. I am unable to forward pics to others via e mail. It simply will not allow, when i have always been able to before.
We took our MacBook Pro to the apple store, after a long trial and error, they FIXED the problem!
It turns out that one of the files was corrupt, it was either Java or Silverlight.
My suggestion to you is to remove Java than restart and then reinstall Java. See if hotmail works. If not, than, remove Silverlight reboot than reinstall Silverlight.
For us, it was one of those two files that were corrupt and that was causing hotmail to not be able to send email.
I'm not sure what the procedure is to remove and reinstall files, all I know is that my wives MacBook can now send email using hotmail.
Hope this helps.
Stephen -
How can I see the contents in a Ref Cursor
I have this code:
CREATE OR REPLACE PACKAGE APOD_LOG.APOD_C3_LOG_API_PKG
AUTHID CURRENT_USER
AS
type rc is ref cursor;
PROCEDURE Fetch_Log_Spec
in_LOCAL_IP_VALUE IN BINARY_INTEGER,
out_RESULT_SET OUT rc
END APOD_C3_LOG_API_PKG;
CREATE OR REPLACE PACKAGE BODY APOD_LOG.APOD_C3_LOG_API_PKG
AS
PROCEDURE Fetch_Log_Spec
in_LOCAL_IP_VALUE IN BINARY_INTEGER,
out_RESULT_SET OUT rc
IS
BEGIN
DBMS_APPLICATION_INFO.set_module(module_name => 'APOD_LOG.API_PKG',action_name => 'Fetch_Log_Spec');
DBMS_APPLICATION_INFO.set_client_info(client_info => 'Calling with in_LOCAL_IP_VALUE = ' ||to_char(in_LOCAL_IP_VALUE));
open out_RESULT_SET for
select
in_LOCAL_IP_VALUE as IN_LOCAL_IP_VALUE,
10002 as PORT,
APOD_CORE.UTIL_IP_PKG.IPAddressToIPValue2('''224.168.100.1''') as MULTICAST_IP_VALUE
from
dual
union
select
in_LOCAL_IP_VALUE as IN_LOCAL_IP_VALUE,
10002 as PORT,
APOD_CORE.UTIL_IP_PKG.IPAddressToIPValue2('''224.168.200.1''') as MULTICAST_IP_VALUE
from
dual
union
select
in_LOCAL_IP_VALUE as IN_LOCAL_IP_VALUE,
10002 as PORT,
APOD_CORE.UTIL_IP_PKG.IPAddressToIPValue2('''224.168.100.123''') as MULTICAST_IP_VALUE
from
dual
union
select
in_LOCAL_IP_VALUE as IN_LOCAL_IP_VALUE,
10002 as PORT,
APOD_CORE.UTIL_IP_PKG.IPAddressToIPValue2('''224.168.200.123''') as MULTICAST_IP_VALUE
from
dual;
DBMS_APPLICATION_INFO.set_client_info(client_info => 'Called Fetch_Log_Spec '||to_char(SQL%ROWCOUNT)||' row(s) returned with in_LOCAL_IP_VALUE = '||to_char(in_LOCAL_IP_VALUE) );
END Fetch_Log_Spec;
END APOD_C3_LOG_API_PKG;
And I am trying to test it like this:
DECLARE
IN_LOCAL_IP_VALUE BINARY_INTEGER;
OUT_RESULT_SET APOD_LOG.APOD_C3_LOG_API_PKG.rc;
BEGIN
IN_LOCAL_IP_VALUE := 23374048;
-- OUT_RESULT_SET := NULL; How do I see this
APOD_LOG.APOD_C3_LOG_API_PKG.FETCH_LOG_SPEC ( IN_LOCAL_IP_VALUE, OUT_RESULT_SET );
END;
How can I see the dataset returnd by the OUT_RESULT_SET in SQLPlus or Quest ScriptRunner?A ref cursor doesn't really contain rows but you can use them to reference a SQL statement that fetches the rows.
Re: returning resultset from procedure...or pkg -
How can I see Foreign Currency FC balance in Purchase Analysis Report??
Dear Experts,
Right now in the Purchase Analysis Report, I can only see Local Currency and System Currency balances. How can I see Foreign Currency balances??
Much Thanks!
Warmest Regards,
ChinhoHi!
I belive its not there in Purchase\Sales Analysis Reports. You need to build a Customized report for that. -
How can i re download a movie from itunes store that i bought but it crashed while downloading?
from the "download recent purchases" on itunes i can seem to be able to access movies, only music, apps and tv series… how can i re download a movie from itunes store that i bought but it crashed while downloading?
If it never finished downloading then, Store>Check for Available Downloads
-
priority:
I am trying to facetime on my mac but keep getting the message "The server encountered an error processing registration. Please try again later." I have gotten this multiple times. how can I get around this?
i also have tried downloading "FaceTap" application to get facetime on my ipad and failed too. i thought i failed because i couldnt download latest 6.0 iOS or later. i downloaded latest software update for iOS but was 5.8 I thinkWait until Apple fix it. See: http://www.apple.com/support/icloud/systemstatus/
-
When I am on my home wifi I can send e-mail. When I am not on my home e-mail but on a wifi network or using the 3g network I cannot send e-mail. HELP HOW TO FIX.
I know this question is a few years old now, but I recently found myself having the exact same issues;
Using my iphone or ipad at home created no problems at all, but I couldn't send e mails when away from my home network.
I recently switched broadband supplier at home and set up a new e mail address, then my problems began!
I openly admit I'm not great with technology and, to be honest, some of the answers provided on these forums confuse me more than the questions!
But this worked for me:
I went along the lines that the fault wasn't with my idevice but possibly with the broadband provider (in my case Plusnet) so I contacted their customer support.
They referred me to the set up process shown below;
From your home screen press Settings.
From the setting menu, choose Mail, Contacts, Calendars followed by Add Account…
From the Add Account… menu choose Other.
Fill in your Full Name, Email Address, Password and Description and press Next.If you need help with these, there's more detail underneath the screenshot.
Full name: Enter your name (or the name you'd like people to see when you send them email)
Email Address: Enter the address you're setting up, this could be a Plusnet address ([email protected]) or a hosted domain address ([email protected])
Password: Enter the password for your email address (I don't know what this is)
Description: Enter a useful description of the email address you're setting up (e.g. Mum's email). You can put whatever you want here
Press Next to continue.
More settings will appear. Some will already be filled in.Enter the Incoming and Outgoing Mail Server details and press Next. If you need help with these, there's more detail underneath the screenshot.
IMAP/POP This will default to IMAP - it's up to you which one you want to use (I don't know what to choose)
Incoming Mail Server settings
Host Name: For IMAP this is imap.plus.net - for POP, this is mail.plus.net
User Name & Password: Enter the username and password for the email address you're setting up (I don't know what these are)
Outgoing Mail Server settings
Host Name: relay.plus.net
User Name & Password: These are optional, but if you want to send mail while on the move (e.g. while connected to mobile or wireless networks), we recommend filling these in.Enter the username and password for the email address you're setting up (I don't know what these are)
When you're finished, press Next.
If the box shown below appears, press Yes (you may need to do this twice).
After a minute or two, your email address will be set up and ready to use.If you chose IMAP when setting up you’ll be able to choose whether you want to use Notes (if you chose POP you’ll be taken back to the settings screen from step 2). Press Save when you’re done.
That's all you need to do. To start checking your email, go back to your home screen and press Mail.
Now I fully understand that it may be different for each broadband provider but the processes must be similar.
The key appears to be in setting up the outgoing message server settings in step 5. Where it says "optional, but if you want to send mail while on the move (e.g. while connected to mobile or wireless networks), we recommend filling these in.
http://www.plus.net/support/email/setup/ios-setup.shtml#pagetop
Where it says "we recommend" I think it should read "you must fill these in"
I went back to Settings - Mail,Contacts, Calenders - click on the offending account and click on the account shown.
Under OUTGOING MAIL SERVER click on the server, in my case relay.plus.net, and click again to show the details. make sure you enter your user name and password and after a few seconds the account will verify and show a load of ticks.
I tried this on my phone this morning while on 3G only. I sent an email to another of my addresses and immediately got the response that the message couldn't be sent as the recipient was rejected and the message had been placed in my Outbox. I followed the above steps and immediately heard the satisfying "whoosh" as my mail was sent. 10 seconds later another satisying beep as my e mail arrived at my alternate account.
Hope this helps anyone else with a similar problem. -
My mac book startup disk is full and when I start it, it give me a blank blue screen. I have tried the shift upon start
and I started in safe mode, and it gave me the stars screen. How can I delete files to fix the problem1. Start up in Safe Mode.
http://support.apple.com/kb/PH11212
2. Empty Trash.
http://support.apple.com/kb/PH10677
3. Delete "Recovered Messages", if any.
Hold the option key down and click "Go" menu in the Finder menu bar.
Select "Library" from the dropdown.
Library > Mail > V2 > Mailboxes
Delete "Recovered Messages", if any.
Empty Trash. Restart.
4. Delete old iOS Devices Backup.
iTunes > Preferences > Devices
Highlight the old Backups , press “Delete Backup” and then “OK”.
http://support.apple.com/kb/HT4946?viewlocale=en_US&locale=en_US
5. Re-index Macintosh HD
System Preferences > Spotlight > Privacy
http://support.apple.com/kb/ht2409 -
How can I attach an image without the image is in the email body? (using the new mail the Lion)
How can I attach an image without the image is in the email body? (using the new mail the Lion)
I want in attachment, not in the body mail.I think your only solution is to zip the image files first and then attach them.
Read this from a site I found:
Sending Graphical Attachments -- When you attach a graphical image to your message, the recipient of your message sees the image inline (that is, in the body of the message) if her email client supports inline display. ("Take Control of Email with Apple Mail" contains a table listing the capabilities of popular Mac and PC email clients.) If a client does not support inline display (or the recipient has turned off the inline display option), the file appears as an attachment that must be opened in a separate program.
On the one hand, an inline image is easier for the recipient to see - all she has to do is look at it. On the other hand, inline images can be frustrating to scroll through. If you do not wish to send a graphical image inline, you must compress the file before attaching it - Mail, sadly, lacks a built-in compression option, though fortunately for Panther users, the Finder offers Zip compression without requiring a separate application.
Note that when you compose a new message, Mail always shows attachments in the body of your message. You can manually drag them somewhere else, but many email clients display all attachments in a separate list, regardless of where you place them in the message body.
If you paste an image into a message or drag & drop an image from another window (say, a Web browser), Mail converts the raw image data to an attachment in TIFF format. On the other hand, if you drag & drop the icon of an image file (or use the Attach button to locate the file using the file browser), Mail leaves the attached image in its original format. This difference is significant, because although most email clients can display JPEG images just fine, support for TIFF - especially in non-Mac email clients - is less common. If possible, I suggest attaching image files as opposed to pasting or dragging in raw image data. -
I live in a house with multiple iCloud users. When they try to turn on "Find my computer" they get the message that they will have to disable my "find my computer" setting in order to enable theirs. How can they all be enabled at the same time?
Try this support document for information on how to contact Apple and account security. Apple ID: Contacting Apple for help with Apple ID account security
-
I use a iphone and MacBook Pro using mail on each. How can I see the same mail boxes on the laptop that I see on the iPhone?
for starters this is not the forum for notebooks or for that matter icloud or iphone.
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro
http://www.apple.com/support/iphone -
Mac OS no longer available after trying to remove Windows on Bootcamp. How can I restore Mac OS without the Mac HDD in options?
So what I did was, I had bought my iMac from a shop and asked them to do bootcamp for me. However, they installed 32 bit instead of 64. My fault, I did not make my self clear about it. So after it has been delivered to my house, I realized that I wanted the 64 bit. I tried to remove windows on bootcamp but honestly, I have not experienced this before. So I failed. I believe, I did something wrong.
So I opened the iMac and it keeps asking me to go to windows. Windows OS also corrupted.
I tried the Option Key but the only option is Windows 7 only. So using a different keyboard, I press option and it only shows Windows HDD and the Mac HDD has gone.
What am I going to do? How can I restore Mac OS without the HDD anymore?iMac, Mac OS X (10.7.2) < your profile
Try using Lion Recovery
Maybe you are looking for
-
How to setup iphone remote without apple tv remote
I lost my apple tv 1st gen remote and was wondering if there was any type of bypass method to set up my iphone as the remote. I really hate to buy a new one so please let me know if you know anything!! Oh by the way I have used usb creator 3.0 and re
-
For the past few weeks my computer will slow down when I have been on Safari for awhile, then freeze, and then just go black. I have to press the power button and then it goes to a black screen with the apple logo and a loading bar underneath when i
-
Instantiate Oracle BPM Process Webservice from the OSB.
Hi, In our project we have one requirement i.e Instantiate Oracle BPM Process Webservice from the OSB.After register BPM service in to OSB I am creating one Message flow to instantiate BPM Process. first call to startSession Operation, then use respo
-
[CRM] Check the order after adding line items
As an enhancement, I've created a piece of code that determines the default quantity for an item. On its own, it works as intended. When creating a new contract based on a template, the same default quantity coding is being executed, thereby - in mos
-
Oracle error when doing filter to joins
when doing a filter based upon on results of another request i get the following error. error : (Response came back as text, not XML) the saved request i am linking to has unions in it vs being a single request. If i link to a single request it works