I tried to send photos which didn't go to recipient, but it is to try to send it and I am getting 200 recovered messages. I can't stop the process even after rebooting.

I tried to send photos on aol through mac mail. The email did not sent, but I keep getting recovered messages despite rebooting. I don't know how to stop it.

An AOL account is normally set up as an IMAP account -- have you been using it in Mail?  If not, open Mail Preferences/Accounts/Advanced and choose such that copies of messages and their attachments are not kept.  I am suggesting this as you may be downloading previous messages upon connection.
Ernie

Similar Messages

  • I was asked to download the iOS on my ipad3 which then completed automatically but instead iTune with a plug-in icon came on the screen. SInce then I can't operate the ipad even after I switch it off and on again. The icon just monopolize the screen.

    I was asked to download iOS on my ipad3 which the completed automatically but instead iTune with a plug-in icon came up on the screen. SInce then I can't operate the ipad3 even after I switch off and on again. That icon just monopolize the screen ! What shall I do now? Please help.

    Try and put your iPad in recovery mode
    http://support.apple.com/kb/ht1808

  • I forgot my passcode, so I was unable to access my phone. I then tried to restore it, but it has frozen during the process. It won't connect to my mac again and I can't stop the process because my lock button is broken. What do I do?

    I forgot my passcode, so I was unable to access my phone. I then tried to restore it, but it has frozen during the process. It won't connect to my mac again and I can't stop the process because my lock button is broken. What do I do?

    My first advice is "Back up the device, then have it replaced."  Second item of advice, "Don't forget your passcode."
    One of the purposes of the lock button is to recover from certain software failures.  Without the lock button, such a recovery is nearly impossible.  My advice would have served you best when the malfuction first developed, not after you forgot your passcode.

  • I recently upgraded from Leopard to Snow Leopard and I noticed that I have more capacity available on the Macintosh HD. I checked my files and applications and they are still on my computer. Can capacity on the HD change after an OS upgrade?

    I recently upgraded from Leopard to Snow Leopard on my MacBook and I noticed that I have more capacity on the Macintosh HD than before the upgrade. I checked my files and applications and they are still on my computer and nothing appears to be missing. Before the upgrade I had around 111 GB capacity with around 10.50 GB available on the Mac HD but now after the upgrade I have 119 GB capacity and 20.92 GB available. Can capacity on the HD change after an OS upgrade?

    No, but the upgrade removed unneeded PowerPC code and changed the way free space is determined.
    (72071)

  • When I try to download CC or PS I get an error message. I paid for CC two days ago; rebooted,etc.

    When I try to download CC or PS I get an error message. I paid for CC two days ago and am still getting this. I rebooted several times with same result.
    This is the message:
    We're sorry. Something seems to be wrong on our end. Please try again later. If this continues to fail, please contact Customer Support.

    Hi zelsha,
    Please try to download from the direct link: http://prodesigntools.com/adobe-cc-direct-download-links.html.
    Kindly follow the very important instructions before download.
    Regards,
    Romit Sinha

  • Can not startup the oracle db after reboot

    Hi.
    I have an Oracle 10g DB running on Linux9 server. It works well before I reboot the server this morning. I can not startup the db.
    $ sqlplus /NOLOG
    SQL> CONNECT sys/password AS SYSDBA
    Connected to an idle instance.
    SQL> STARTUP
    ORA-17503: ksfdopn:2 Failed to open file +DATADG/orcl10g/spfileorcl10g.ora
    ORA-15055: unable to connect to ASM instance
    How can I do to restart the db??
    Any hints are highly appreciated.
    Qian

    Yes, it seems all right. But the real problem is: after I start listener,
    Oracle Enterprise manager 10g Fatabase Control and iSQL*Plus, I can not connect to the http://localhost:5500/em. The Alert says: The connection was refused when attempting to contact localhost:5500.
    I can connect to the iSQL*Plus. I mean, the http://localhost:5560/isqplus/, but can not login. The Error says: ERROR-ORA-12514: TNS: listener does not currently know of service requested in connect descriptor.
    When I see the status of listener,
    The Alert of listener says:
    Connecting to (ADDRESS=(PROTOCOL=tcp)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for linux: Version 10.1.0.2.0-Production
    Start Date 18-JUL-2006 11:29:31
    Uptime 0 days 0 hr. 0 min. 0sec
    Trace level off
    Security ON :Local OS Authentication
    SNMP OFF
    Listeneer Log File /opt/oracle/product/10.1.0/db_1/network/log/listener.log
    Listener Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=flulinux01)(PORT=1521)))
    Service Summary...
    Service "+ASM" has 1 instance(s).
    Instance "+ASM", status BLOCKED, has 1 handler(s) for this service...
    The command completed successfully.
    I don't know which part is wrong. This morning all things work well....
    And How can I check the db is startup? If the db is started, can I use sqlplus even without listener?
    Qian

  • Lightroom crashed and now I can't open the catalog - even after deleting the lock file.

    Lightrooms crashed, which is a common occurrance. But, this last time was different. After I restarted it my catalog was not linked and all my settings were gone. I tried opening the catalog through the file menu, but absolutely nothing happens. I tried going to the folder and clicking on it but this only opens lightroom with no catalog. After having scanned this forum I found that I need to delete the .lock file, but after doing that the same things happen. Any suggestions on how to open my catalog? Will reinstalling Lightroom help?

    The problems mostly happen when I am using X-Y compare in Library mode. It shows black rectancles over the tops of the sections that contain the photos and these flash. They aren't always the same size, but are only on the top of the section - never big enough to completely cover the photos. Then I get anywhere from one to about four or five extra windows stacked on top of the Lightroom Icon at the bottom of my screen (I use Windows 8) opening and closing, though there isn't enough time for me to click on them and read them because my computer gets so slow that my mouse actin is delayed by a few seconds. And, to shut Lightroom down, I need to use Windows task manager because clicking on the little red box with the X in the upper right corner accomplishes nothing. I have a new Sony Vaio i5 chip and 8Gb RAM. This also hapened on my old computer, though not as often

  • I can't open the app even after reinstalation !

    As I said previously, I can't open it even after switched off the iPad, restarted the app and redownloaded it...
    When I launch it, a grey screen appears and then the app crash ...
    Help me please !

    The problems mostly happen when I am using X-Y compare in Library mode. It shows black rectancles over the tops of the sections that contain the photos and these flash. They aren't always the same size, but are only on the top of the section - never big enough to completely cover the photos. Then I get anywhere from one to about four or five extra windows stacked on top of the Lightroom Icon at the bottom of my screen (I use Windows 8) opening and closing, though there isn't enough time for me to click on them and read them because my computer gets so slow that my mouse actin is delayed by a few seconds. And, to shut Lightroom down, I need to use Windows task manager because clicking on the little red box with the X in the upper right corner accomplishes nothing. I have a new Sony Vaio i5 chip and 8Gb RAM. This also hapened on my old computer, though not as often

  • I upgraded to Firefox 4.01 but it keeps asking me to reboot whenever i want to launch the program even after rebooting for at least 7 times

    I have rebooted the system many times but I am not able to launch Mozilla F. 4.01. After upgrading it, I cant even redownload it or go back to the older version: it keeps asking me to reboot the system everytime I try to launch. Please HELP! I highly dislike IE! besides I got all my bookmarks with Firefox.

    You can do a clean (re-)install:
    * Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    * Do not remove personal data if you uninstall the current version.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

  • I get an error message saying firefox is still running ut even after I reboot,same thing happens

    Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

    Probably a "hung" firefox.exe process.
    [https://support.mozilla.com/en-US/kb/Firefox%20hangs#w_firefox-hangs-when-you-quit-it Firefox hangs when you close it]

  • When I shutdown firefox the process stays alive preventing me from reopening it. I end up going into task manager and stopping the process even though it does not show in the applications.

    the process is taking from 25000K to 75000K memory but not actually open

    See "Hang at exit":
    * http://kb.mozillazine.org/Firefox_hangs
    * [[Firefox hangs]]

  • HT201302 I am trying to upload pictures from my phone to my computer and I'm getting an error message that a photo is corrupted so it can't download.  I don't know how to tell which of the photos is corrupted so that I can delete it and try again?  Thanks

    I am trying to upload pictures from my phone to my computer and I'm getting an error message that a photo is corrupted so it can't download.  I don't know how to tell which of the photos is corrupted so that I can delete it and try again?  Thanks!

    If this is an iCloud account the Outbox only appears when sending an email, so if it is still trying I suppose it should be showing now (not sure though, hard to replicate this)
    What type of email account?

  • AirPlay button not appearing even after reboot

    I recently updated my iPhone 3Gs 32GB to iOS 4.2.1 and found no AirPlay button. I read a thread about rebooting your iPhone once, but that didn't fix the problem either. Even after rebooting the device, I still can't see any AirPlay button. Any help?

    I have the same probelm and even thought the botton on
    any suggestions ?

  • Iphone 4 front camera not working even after reboot,resets and restore.

    i am using iphone 4 .I have problem that front camera is not working even after reboot,resets and restore with itunes.I thing there is a hardware problem.
    Now i wont to go apple store for replace the phone because phone is under warranty period.But problem is that i lost the receipt.Will apple store help me without my receipt ?please help me

    If setting up as new device without using the latest backup does not bring the camera function back, get it looked at or serviced by Apple:
    How to back up your data and set up as a new device
    Apple - Support - Service Answer Center

  • I am trying to upload photos from my iPhone to my macbook but each time I plug my iPhone into the macbook, a message comes up which says my device is locked with a passcode and I cannot load the photos.  Please help.

    I am trying to upload photos from my iPhone to my macbook but each time I plug my iPhone into the macbook, a message comes up which says my device is locked with a passcode and I cannot load the photos. When I plug my phone in, it is on the home screen and unlocked so I don't understand what I am doing wrong. This has never occurred before. Please help.

    Get a powered USB hub.
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

Maybe you are looking for

  • Issue in segment creation for File to IDOC mapping

    Hi, I have file with many feilds, i need to create a segment in IDOC for unique combination of 2 feilds. eg: 408 430050 segment 208 430050 segment 208 430050 208 460100 segment 208 452010 segment 408 432000 segment 208 432000 segment the value for th

  • Multiple Stacks - Loading into Photoshop Layers?

    Hey all, is there a way to use Bridge in order to stack multiple images - into multiple layered files? Let me give you an example: I have the following files - Image_001_a.tif Image_001_b.tif Image_002_a.tif Image_002_b.tif Image_003_a.tif Image_003_

  • My computer has a ghost in it

    Ok seriously, this thing is driving me crazy.  It does things on its own without me touching it.  The shuttle things keeps coming on. It will skip to the next song by itself in windows media player.  The booksmark and find windows will pop up when Im

  • How to configure snmp on solaris 10 for sending traps to any EMconsole

    i am working on solaris management console(smc) .i want to configure snmp for this (smc)to send traps regarding system performance and cpu usage ..can any body know ho to do this .i am new to solaris ..learned some basic administration of it ..

  • WP document table color?

    Hello! I am trying to create a table in a word processing document that has black cells & white text. Is this possible? If so how can it be done? I am using Appleworks 6.2.4 if that helps.