I tried to update my ipad air to 8.1, while istalling updates suddenly it went to recovery mode. Now when I try to restore factory settings it keeps restarting again and again.What shall I do in this situation?
I tried to update my ipad air to 8.1, while istalling updates suddenly it went to recovery mode. Now when I try to restore factory settings it keeps restarting again and again.What shall I do in this situation?
This is Linda again. The new iPad actually as not restored on my employees computer. I thought it was working. Message said the device is in recovery mode and can not be restored. I have been at the Apple store for a total of 6 hours and on the phone with support for at least 4 hours. And now the replacement has crashed??? Has this happened to any one else?
Similar Messages
-
I have an iPad that is stuck in recovery mode. When I try to restore the firmware, I get an unknown error occured (1611). Does anybody have a solution for this?
There is a way to get it recovered from the so called DFU mode. Try to restart the phone while holding the home and power button at the same time. Then try to connect it to iTunes and do the same again. If you try that again till it works you should be able to use your iPhone as before.
-
when i upgraded my iphone to the new update My iphone 5 screen went completely black and has been like it for 2 days. I have tried holding home and lock,I have tried holding lock and the volume, and I have tried holding just the volume, it still just stays black.
When i plugged it into my Mac the apple logo comes up on the iphone screen. and then on the computer it says itunes has detected an iphone in recovery mode. you must restore this iphone before it can be used with itunes. (as in the below pictures)
when i click ok to restore it just says waiting for iphone (as in the other photo below). i left it in for 20minutes and still said the same thing.
after that i tried unplugging the iphone and it just went back to being a black screen again if anyone has any idea please please help me, thank you.I searched the iPod Touch forum for "iphone in recovery mode" and it appears there are two possible solutions:
- Place the iPod in DFU mode and then restore it>
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Use this program to get it out of recovery mode:
RecBoot: Easy Way to Put iPhone into Recovery Mode | Jaxov -
my ipod 4 is stuck in recovery mode and i dont really want to restore it because i havent really backed it up. what should i do in this situation?
If one of these programs will not kick the iPod out of recovery mode then you will have to restore and thus erase the iPod
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
In the future, frequently backup your device. -
During the updation of 10.7 version of Itunes on my iphone 4s, my phone has gone into recovery mode & is not showing up in i Tunes nor in my computer (windows xp). What shall i do so that my phone gets connected & running??
Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
Resolve specific iTunes update and restore errors -
I updated my ipod Touch 4g directly on ipod using wifi. on itunes too it shows ios 6.1.2, but when I try to restore it, itunes downloads the software again. What can I do now?
Let the computer/iTunes download it. That is how Apple has it set up. When you restore via iTunes the IOS is reinstalled on the iPod. Thus, it needs to be on the computer.
-
i was in the process of jailbreaking and updating my ipod and when i was updating it,it went into recovery mode and now i cant get it out of recovery mode so what can i do??
Go elsewhere:
Jailbreaking voids the Apple warranty and also means that you will not get any support from Apple, including from this Apple forum. Jailbreaking can't be discussed in this Apple forum.
Unauthorized modification of iOS has been a major source of instability, disruption of services, and other issues -
i was updating my iphone 3gs , but error occured while itunes was updating firmware. it asked me to revert back to backup. it is in recovery mode. now when i am restoring , again eroor is there while updating firmware part . (1015) . please help what to do . or manually download a update
same thing happened to me. my phone is unlocked. did you have any luck.
please send info.
thank you -
Have an older Macbook Pro 10.6.8 tried to update it to XMavericks. Discovered that my microsoft apps are not compatible. Can I keep my files and convert them?
Use a product such as LibreOffice, the iWork applications, or Microsoft Office 2008 or newer to open them.
(107914) -
yesterday i upgrade my iphone 4s to ios 7.0.4 after my backup...now when i try to restore my backup it asks passcode...i know i havent set any passcode ! i tried my iphone passcode itune passcode it still says passcode incorrect. how can i solve this? i wondered how it is password locked ???
http://support.apple.com/kb/HT1212
-
My iPad is currently in recovery mode. When i attempt to restore it through iTunes, I get an error message: "an unknown error has occured, error 40", Help is appreciated!
SadisticIron wrote:
i just baught my first iphone and it is a jalbroken
Buzz! Thank you for playing!
Discussing jailbroken devices is forbidden here by the Terms of Service.
You can not get help here. -
I had an 8GB 1st gen iPod in it's original box in storage and just took it out to hook it up. Charged it overnight, plugged it into new Mac Book Pro and it was recognized as being an iPod in recovery but other identifying information was all indicated as "n/a" (so, unknown OS, etc). Error code 1604 came up so I downloaded iTunes on the Mac Book and it is currently showing version 10. But now when I try to restore the iPod, error code 1611 comes up and the troubleshooting doesn't tell me what else to try. The USB connector that came with the iPod was also never used before - brand new also from the box so that should be fine. I also tried a different USB port on the Mac Book. Any ideas?
Error 1611
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service. -
i upgraded my iphone4 to ios 6.0.1 but my phone reset it self and its in recovery mode & every time i try to restore my phone its saying error 2001 or 2006 & my lock button is broken so i cant put my phone in dfu mode what im i suppose to do help me pleas
Hi, to get your iPhone 4 back to normal, here're two ways for you.
1. Use Dr.Fone for iOS. The free trial version can fix iPhone screen of death. The free trial version can do that, you don't have to pay.
Just download and install this software on your computer and connect your iPhone 4 to computer with a USB cable. When it detects your iPhone 4 is abnormal, click Restart the device to get your iPhone 4 to be normal.
2. Use iTunes to fix it.
Step 1. Make sure that the latest iTunes is installed on your computer.
Step 2. Plug into a USB cable to connect your iPhone4 to computer.
Step 3. Press and hold the Home button and the Sleep/Wake button at the same time for about 10s.
Step 4. 10 seconds later, release the sleep/wake button. But continue to hold the home button until a message comes out, saying "iTunes has discovered an iPhone 4 in recovery mode, you must restore this iPhone before it can be used with iTunes".
Step 5. Click your iPhone 4 in the left sidebar to show the device control panel on the right. Then, click Summary.
Step 6. Go to Backups section and click Restore Backup.... In the drop-down list, choose a backup file and restore to your iPhone 4 -
I backed up my bookmarks to an external drive, rebuilt my system, and now when I try to restore from that file, I get "unsupported file type" How can I restore from this file?
Make sure that the backup file with the bookmarks has the correct file extension: .html for a HTML backup and .json for a JSON backup.<br />
You can check that via the right-click context menu of that file and open the Properties.<br />
If you are not sure about the file type then you can open the file in Firefox via "File > Open File"<br />
A JSON backup will show as one long text line without line breaks and a HTML backup as a web page with clickable links.<br />
A JSON backup starts with: {"title":"","id":1,"dateAdded":<br />
An HTML backup starts with: <nowiki><!DOCTYPE NETSCAPE-Bookmark-file-1></nowiki>
You may need to add quotes ("") around the name to rename the file to the correct file extension.
See also:
* http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox -
I tried to update to the most recent version of itunes but the update failed. Now when I try to open itunes I get a dialog box telling me it can,t open because MSVCR80.dll is missing. I tried uninstalling and reinstalling itunes but I grt the same message. What can I do to fix this?
Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process.
Maybe you are looking for
-
Http proxy authentication for JDev 10.1.3
Hi, I found the http proxy settings in the "tools->preferences->Web Browser and Proxy" but there are no settings for the username and password. Is there some other way that I can add these. The problem is that whenver JDeveloper wants to do some http
-
Failover cluster wmi provider detected an invalid character
We are getting this recurring error in our two node hyper-v cluster: ID: 6237 Source: FailoverClustering-WMIProvider Logs anywhere from 1- 15 of these errors every half hour. We are running on Server 2008 R2 SP1 with Hyper-V role and management done
-
Problems with WebLogic 5.1 Tour
I'm running the tour on an evaluation copy of WebLogic Server 5.1. There are three places in the tour that don't seem to work correctly. 1. On the WebLogic Events page, the applet doesn't display anything. That is, the applet area is totally blank. T
-
Hi all, Can we rewrite this query as simplest.Becasue when i Execute this query it will take more time appro 3hrs.So can we rewrite this as possible. SELECT scon.uabscon_number, scon.uabscon_cust_code, scon.ua
-
The sound of a song is really bad. can i get a refund?
I have downloaded "La Vamo a Tumba - Tu Musi-k De Todito, Vol.1" (2009) and the sound is really bad. can i get a refund?