I tried to update my ipad today and i accidently disconnected it, now it is saying on the ipad screen connect to Itunes but the computer wont register my ipad, but earlier it was saying something about apple mobile device. need ipad for school HELP?
the Apple mobile device (recovery mode) wont install properly onto computor what should I do? Help!
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
Similar Messages
-
I tried to download the newest version for iTunes and now it is saying something about apple mobile device. Never heard of this before and now it will not finish downloading because of this. What is it?? What do i need to do to get itunes to download onto my computer again??
I got most of it done but now it is not letting me delete my C:\Program Files\Common Files\Apple
It says that file is open in another program....What do i need to do to delete that?
Do you currently have the iCloud control panel installed? If so, uninstall that. Can you do the deletion now? -
i downloaded newest itunes version and it would not install properly and now i can't open itunes. i have removed and reinstalled several times. i get error 7 (windows error 126) something about apple mobile device failed to start. what can i do to fix this problem besides restoring system to an earlier date
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Apple Mobile Device Service not activated ------ What does that mean?? How can I fix it or activate it???? Already completed a restore in itunes.
Try here:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows -
HT1338 I'm trying to update to ios 7 and it sends me an error message that says
I'm trying to update to ios 7 and it sends me an error message that says "Software update not available at this time please try again later."
Apple's servers are busy. Check again in a few hours or tomorrow.
(89445) -
i'm having issues with reinstalling my itunes.it says that my apple mobile device faild to start and will not go any further
Hey there CrazyTC,
It sounds like you are unable to re install iTunes because the Apple Mobile Device service failed to start. Try restarting it with the following article:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
Windows Vista or Windows 7
Close iTunes and disconnect the iPhone, iPad, or iPod touch.
Click the Windows Start button .
In the Start Search field type Services.
In the Programs section of the search results, Click "Services".
Select Apple Mobile Device and click Stop the service as shown below:
After the service has stopped, click Start the service.
After the Apple Mobile Device service has started again, open iTunes and connect the device.
Then if the issue is resolved, set the service to start Automatically with the same article.
If it is still not working, use these steps from the same article to completely uninstall iTunes and its associated applications and install a fresh copy.
Remove and reinstall iTunes and AMDS
If the issue continues after restarting AMDS, then you'll need to remove and reinstall AMDS and iTunes.
Completely uninstall AMDS, iTunes, and all Apple software. Click the appropriate links below for steps:
Windows XP
Windows Vista, Windows 7, or Windows 8
Restart the computer.
Download and install (or reinstall) the latest version of iTunes from www.apple.com/itunes. Installing iTunes will also install AMDS.
Restart the computer.
Start iTunes and connect the device. It should be recognized properly in Windows.
Thank you for using Apple Support Communities.
All the very best,
Sterling -
I updated my software today and since have not been able to use some of the games on Facebook. I have installed the flash player 12 and still problems, can anyone give me some advice?
Your above posted list of installed plugins doesn't show the Flash plugin for Firefox.<br />
See [[Managing the Flash plugin]] and [[Installing the Flash plugin]]
You can check the Adobe welcome and test page: http://www.adobe.com/software/flash/about/
You can use this manual download link:
*http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller -
I was trying to update my iphone 4s and it showed an error, now my phone is stuck in connect to itunes? Itunes does not recognize it?
turn off antivirus and firewall.
make sure you have itunes 10.7 -
I was trying to do the latest update on my desktop for my Itunes. I got MSVCR80.dll is missing. I saw a post about deleting all the apple itunes programs, restarting and reinstalling. I tried that. As it was installing a message came up about "Service'Apple Mobile Device' failed to start. Verify that you have sufficient privileges to start systems services. I did a retry, got the same message, then hit ignore. It went on. Then a message popped up saying "Itunes not installed correctly" Error 7 (Windows error 126)
Now my Itunes program will not open at all. What gives? This is very frustrating and I am not very computer literate to begin with.Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy -
I keep having issues trying to get itunes installed. I did the recent update and it kept telling me a file was missing. I then uninstalled the whole program. And now when I'm trying to install it. It is telling me something about an error with Apple Mobile Device or Support.
Hi ALCNYC
Thanks for using Apple Support Communities. It sounds like you may need to restart the Apple Mobile Device Service. This article has instructions for doing this:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
If that doesn't resolve the issue, I would recommend trying a thorough uninstall and reinstall of iTunes as described here:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Cheers,
- Ari -
I was updating my itouch that was jailbroken then it just went to recovery mode. I don't what to do anymore.
When I went to services and clicked on Apple Mobile Device, I could not see stop the service.
-
What to do about Apple Mobile Device failed to start problem??
I had iTunes on my computer but when I went to update to the new version of iTunes it kept popping up that my Mobile Device Service failed to start. So I uninstalled iTunes and tried reinstalling but now I have a different box that pops up saying "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services." So I followed the suggested steps to "stop and restart my Apple Mobile Device Service" but it only gave me the start option so I clicked on start and thats when I got the Error 1053 pop-up box!! I have tried all of these steps over and over again and I keep getting the same error messages!! Shown below is the error msh I keep getting!! What do I need to do??
Hi ashcole06
Here is an article that will help you address this issue:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
Take care, and thanks for visiting the Apple Support Communities.
-Braden -
I'm getting a n error message when I try to open Itunes. Itunes was not install correctly. Please reinstall itunes. Error 7 (Windows error 1114) This happened after I unsuccesfully tried to install an update. I have had itunes on this computer for three years. When I try to reinstall the latest version I get another message.Service Apple Mobile Device (Apple mobile Device) failed to start. verify that you have sufficient privileges to start system services. Abort, Retry, Ignore Does anyone know how to solve this problem?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I have been trying to download iTunes on my computer without success. I keep getting a message:
"Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privilges to start system services."
What does an Apple Mobile Device have to do with my computer -- what am I missing here?
AraSaLaHello AraSaLa,
Thank you for the details of the issue you are experiencing with installing the latest iTunes update. I recommend the following article for the issue you described:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
If you continue to experience issues with the installation of iTunes, I recommend continuing with the following article:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thank you for using Apple Support Communities.
Best,
Sheila M. -
My iTunes became corrupted. I tried to upgrade to a new version, but things only got worse. Some of the error messages I received:
APSDaemon - Unable to locate component
This application has failed to start because MSVCR80.dl was not found. Rinstalling the application may fix this problem.
So, I deleted my downloads and past attempts and any .dl files I had and tried again. Now I get this message:
Today: Apple Mobile Device failed to start. Make sure you have sufficient privileges to start system services.Hi ahhan13,
Welcome to the Support Communities!
The article below may be able to help you with this.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
Cheers,
- Judy
Maybe you are looking for
-
Hi, Do anyone know how to set the jco.client.idle_timeout value for a ESS WebDynpro application. Thanks Kiran
-
Future of JavaFx and commitment from Sun
Hi All, I wanted to get some insight into the level of investment an organization could make into adopting JavaFX as the preferred UI technology for their products/applications. Is Sun committed to promoting JavaFX and making it production quality an
-
Download Error (-3256)
Just got a new Apple TV for Christmas. I updated it to the newest version of the software, and I've been having all sorts of odd glitches when syncing and downloading. I have to pull the plug on it a few times a day, and it's becoming very frustratin
-
What is this login item ButtonManager
What is this ButtonManager start up item i have? i seem to have two of them, each has a different code in front of it, I have no idea where they came from, i only notaced it after i was looking into the console and found these items had errors on sta
-
Export metadata from OWB to Oracle OLAP
Hi, I would like to know why the 'OWB export metadata to OLAP' generate an erreur like: ORA-06512: at "OLAPSYS.CWM$OLAP$DIMENSION", line 242 ORA-06510: PL/SQL: unhandled user-defined exception ORA-06512: at "OLAPSYS.CWM$UTIL", line 341 ORA-01403: no