I tried to update my iphone 4 to i6.1 and now the phone wont turn on or charge
i tried to update my iphone 4 to i6.1 and now the phone wont turn on or charge
Um, connect to iTunes?
Similar Messages
-
Just updated my 4s to iSo 6 and now the phone does to pair with my Lexus anyone have/solve this issue? Is it a firmware problem with the car?
Was it pairing before the iOS update?
If so, delete the pairings in the device and the car, then try again.
If it was not, the issue is most likely the car. -
iphone 4s need help battery not workin since uptade of ios7
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
-
I broke my phone about two months ago and now it won't turn on because I believe there is internal damage. If I bought the insurance when buying the phone will I be able to get a new phone for free?
You would have to find that out from where you purchased the insurance. Most insurance policies that are sold for cellular phones have a deductible. Only that insurance carrier can answer those questions for you. Look up the papers that you got when you purchased the insurance.
-
Not sure what just happened. The phone was fine, I put it down for 10 minutes, and now it's completely dead.
I reset the phone by holding down the power button and the back button until the apple icon appeared on the screen, and it has been working since.
-
I need help, I pluged my iphone to itunes and got a message that said there was an update to download and update, I did but when itunes was rebooting and updating I got an error message. and now the phone is telling me that it cant be activated, to plug it in to itunes or to contact support care.
That message usually indicates that your phone was hacked to unlock it from the original phone carrier, then when you updated or restored it locked back to that carrier.
-
I tried to update my iphone4 to enable iO5 and now my phone just shows itunes plugin picture??
Connect it to the charger and let it charge for a while. Then try again. Never upgrade your phone without first connecting the charger. Don't let the battery go dead or the entire device could become disabled.
-
Original iPhone using 2.0 and now the phone won't ring
Anyone else have an issue with your 1st gen iPhone not ringing after installing 2.0? I have shut it off (then turned it back on), reset it, reinstalled 2.0 a couple times but the phone still will not ring. Oh and yes the phone is not set to silent using the switch above the volume control.
Second issue is iPod sometimes will not play through speaker, works when after reset.I am now on my 4th 1st generation iphone. I bought the phone new. I've now had to see the "genious" people more times than I'd care to. They "say" they replace with new phones!!!? The latest issues is that it shuts itself down and will not start without resetting it. Then, once that's done, and I shut it down, it will not start back again. The "genious" on the phone says to restore it to factory.. and again, SAME issue. Buggy is not even close. I bought the bluetooth, and that was 2 "new" iphones, plus 3 new bluetooth headsets. So, here I go again, to the APPLE "genious" bar again.. In total, I've spent more time on this phone, fixing it's numerous issues.. Not to mention... GAS PRICES>>>>>>>> I wonder if they have a reimibursement form for how much gas I've had to use to see these idiots?...Makes me want to return it, and go back to my treo!.... Anyone else haveing these issue, please contact me directly... I'm all about a product working correctly... and spending the money on the first gen. phones, just ticks me off. [email protected]
-
any suggestions?
Restart computer, open current iTunes on computer, connect iPhone to computer with USB cable, hold both home and power buttons for about 20 seconds until iTunes reconizes iPhone in Recovery Mode, click Restore button of iTunes.
-
HI so to be clear
screen cracked
lock button isent working
wont charge
do you think apple will still cover this under a replacement warrenty?Depends how that happened and how long the warranty is still left .....u can replace the screen ...and does the home button work? If so then go to settings> general> accessibility >assistive touch( it has many functions like locking the screen ,screenshotting just by touching the screen
Hope this helps -
It was never jailbroken as far as i know and im not very computer literate, any help would be greatly appreciated
Has it ever gotten wet?.. I'd make an appointment with Genius bar at an Apple store, there's something majorly wrong that a simple 'reset' isn't going to fix...
Sorry... -
i bought a locked at&t phone....
i sent it to be unlocked... got back a dead iphone 5s...
plugged the charger in the wall, it gives me a black screen then the white screen with the apple logo, then repeat....
i tried the dfu thing and now the phone is saying connect to itunes, when i plug the phone outta the wall, the phone goes dead.....
plugging the phone into the laptop NOTHING!!!!!!!!!!!!!!!!!!!!!
the laptop doe read my phone.....
no ding.....
the phone wont turn on....
NOTHING
can someone plz tell me what the **** is going onmariidb wrote:
i bought a locked at&t phone....
i sent it to be unlocked... got back a dead iphone 5s... {snip}
the phone wont turn on....
NOTHING
can someone plz tell me what the **** is going on
That's the problem. That's what the **** is going on. -
I have Iphone 4s on iso 6.1.3 I have tried to Update it to Iso 7.0.4 but the phone stuck on Recovery mode and now i cant update it or restore it to the old iso so please help what i should do?
READ the article from which the question was posted and follow all the troubleshooting steps.
-
I bought a iPhone and I was able to log into my iCloud with no problem and when I tried to update it it kicked me out and now it's asking me for the old apple user please help what can I do...?
Contact the original owner, and ask them to remove the device from their icloud.
http://support.apple.com/kb/PH13695
HTH -
I am trying to update my iPhone to 5.1 and a window comes up saying: "An error occured while backing up this iPhone (-5000). Would you like to continue to update this iPhone? Continuing will result in the loss of all contents on this phone." Any help out there? Thanks.
continue to updatae your phone.
Maybe you are looking for
-
Bootcamp & Mac purchase: just bought song in boot camp. Expect it will not be in Mac. I can copy song folder to Mac but will it be accepted? Will album art be there? I could not go other way because Vista does not see Mac files, so all purchases shou
-
Planning at cost element group level
Is it possible to plan values at cost element group level instead of at cost element level in CCA? Thanks
-
E Rec - Object Data, Job posting, publication
Hi Gurus, I am started to E rec and need clarity on below points, pls assist with your quality inputs. - Where is e rec object data stores (Candidate/Applicant/Postingetc) Is it 5* IN viewable through PB20.. - If object data is stored in IN 5* then w
-
What are the problems u face in N95 8g as it has m...
what are problems u face in N95 8g as it has just internal memory(8g) and do not have card slot..can u tell me?? and which is faster and better for mobile phone internal memory as in N95 8g or memory card as in original N95?? thnaks for answer.
-
Add ons are not showing up in creative cloud
I have installed two preset add ons. They show that they are downloaded in my creative cloud but, there is nothing in the file folder. Help!