I tried to update my ipod 4th gen. but when I came to see how much charge the screen was red and it wasnt charged and i cant use my ipod. the screen turned blue also one time, and now the apple logo comes up and its bright then dim and it stays there help
I tried to update my iPod 4th generation while it was charging and when I came back to check on it the screen was red and it wouldnt go off, and my ipod wasnt charging like it was supposed to. I found out how to get the color of the screen off but my ipod always has the low battery thing and when I charge it sometimes the screen turns blue or the apple logo comes up bright and then it gets dim and stays there. My ipod wont turn on, and I really want it to work again. Help me please! Also, I noticed my ipod battery hasnt been lasting long as it should efore this happened.
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Similar Messages
-
I tried to update to IPad 5.1, but when it finished and tried to restore the backup, it shows me that Itunes could not back up because a session could not be started with iPad. need your help please
This has happened to me a couple of times and what I do is quit iTunes and restart my Mac and then try again and then it will work.
If iTunes has already created the backup, you should still be able to restore from the backup when you are connected to iTunes. Right click on the iPad name on the left side of iTunes and select restore from backup. After the process completes, sync with iTunes to transfer all of your apps, music, photos and other media back onto the iPad. -
My app store says that I have two updates the buffer logo comes up for afew seconds then goes and it still doesnt show me my upgrades:( What should I do?
See this prervious discussion
https://discussions.apple.com/thread/4738058?tstart=0 -
When I power up my iPad Air the Apple Logo comes up like it should then the lock screen only comes up for a second or less so I can't swipe it fast enough to get to the home page. The lock screen just disappears. I have to hit the sleep/wake or home button to bring the lock screen back up so I can swipe it. Have others found this situation with the iPad Air. I have an iPad 2 and it does not happen at all. The Apple store checked it out. One rep said to me this is unusual and had a tech check it out and they said this is normal. If the iPad is suppose to be user friendly, why this extra step to get to the lock screen? Are other owners of the iPad Air having the same problem? If so, what have you done to correct it?
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
Cheers, Tom -
# is not working in my iphone 4s, when i want to see how much credit i have in iphone, i need to put # on that, than it calls and end, it is not working and not showing anything..
http://support.apple.com/kb/HT1848 Did you transfer your purchased item, take a look at the link
-
I've just updated my Ipad to iso7. but when it came on it would not accept my passcode to log on. has anyone had this problem?
Here you are "the strange draft logos"...
-
Ok i have an iPod touch 4th generation. When i go to download an app from the app store it tells me i need the iOs 5 update. Well when i go to the general settings to update my iPod nothing is there for me to press for the update. I have no other clue what to do so i need help please!!!
The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848 -
How can I make sure that my info on 4th gen. iPod has transferred to my new 5th gen iPod and all pertinent content deleted before transferring old iPod to my daughter?
Go to Settings > General > Reset > Erase all content and settings
Also... See the wjosten post here...
https://discussions.apple.com/message/20294697 -
Hello, i have a question on my iphone 4s. I went to a party a few days ago and it had gotten stolen. The next day my friend said that he had found it and it was jaibroken? The phone was on 1 % when i had recieved it. It then died and i plugged it in to the charger. When i plugged it in the apple logo appeared as if it was starting but, it wasnt. The apple logo appeared for about ten seconds and then the screen went black. After that, the connect to itunes screen popped up and will not go away. So now when i take it off of the charger the screen just stays black and wont turn on? I tried connecting it to itunes and restoring it. But it wont even show my phone any more on the side of itunes. I tried restoring it and an error had occured (2001). I have looked up on youtube how to fix this problem and non of them have helped or worked. Its my only phone and i cant even text my girlfriend which bothers me terribly!! Please help me ASAP!!
The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
You're on your own. Good luck. -
So I had an iPod touch and everything with it is fine. I just bought a second one for my daughter...exactly the same as my iPod. This second one was bought used, but was reset completely before I plugged it into my computer. My problem is... my iTunes does not recognize the second touch as a device! I can't get it to sync, so I can't get any music or anything onto the device. How can I have two iPod touches on my computer? Is there something special that I have to do to get my computer to recognize this second touch as a different device?? PLEASE HELP!!!
- If you are using the same USB port and the same cable and have iTunes version 10.7 or later on the computer there is something wrong with the iPod.
- Does the second iPod work?
- Does it charge?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears. -
I found an ipod 4th gen but its disabled.how do i unlock it?
I need help unlocking it
An Apple Store w/ Genius bar may be able to help someone unlock
their own Apple iDevice, however since it was found & belongs to
another, about the only reason to unlock it would be to find original
owner and return it. A 'lost-and-found' department may exist at a
local police station or somewhere near where it was found.
Lost items taken to an Apple Store would be handled according to
any policies and procedures they have in place. Whether or not
those unclaimed have any further disposition would be something
to discuss with someone at the Apple Store representing retail
Apple. They may have some process to help return it to an owner.
If you buy an iPod, iPad, or other device and lose the Apple ID one
used to set up the iDevice, an Apple Store could likely be of help if
the person who owns it has proof of purchase in their possession.
This discussion area is mostly comprised of user-to-user interface
with some limited direct contact to hosts and discussion specialists
who occasionally reply to some posts in certain threads. So most
active persons here do NOT represent Apple, or its policies.
Good luck & happy computing! -
i have an ipod 2nd gen and it loads faster thanmy ipod 4th gen
This is the iMac Forum, try your question here iPod touch
-
First of all im from Estonia so im sorry about my bad english. The thing is that i wanted to sell my iphone 3gs, but when i erased all content and settings my battery went so low it shut down. So i tryed to turn iphone on while it was charging and only thing i saw was apple logo loading. Then, when it was loaded it restarted and came apple logo without loading and then again with loading and so on. Then i thought i can update my iphone or something with itunes and i plugged in to my computer and itunes cant find it either. And i thought maybe it needs to load for a long time so i left it to load for about 18 hrs. And its still loading ... So people please help me! Thank you.
http://www.iclarified.com/entry/index.php?enid=1034
-
can any1 help me on this ?
Unless this program will get it out of recovery mode (very doubtful)
RecBoot: Easy Way to Put iPhone into Recovery Mode
You will have to restore and thus erase the iPod. Restore from backup if yo have one.
iOS: How to back up -
I'm having trouble with my itouch. It keeps on saying that my connection has timed out. I really dont know what to do. Please help. D:
Try disabling yur computer's security software (antivirus, firewall etc.).
Maybe you are looking for
-
Hi experts, I have created an error log in the background using JOB_OPEN JOB_SUBMIT and JOB_CLOSE. A job is being processed successfully and a spool is also being created with the job and all the records that are being read in the report are being
-
SQL Server Express 2014 - Server Name
Hi Guys, I just now installed the free edition of SQL Server 2014 (Management Studio only edition). During installation I was not allowed to provide an instance name. Post installation when I am trying to connect the server using the management stud
-
IPhoto 9.1.5 Won't Print; Theme Problem
Running 10.6.8 and recently I became unable to print my own photos on iPhoto 9.1.5. I have done everything I can think to do. Completely reinstalled 9.1.5 from iWork's and my Time Machine using 7/13/11 content. Nothing worked. Also did the usual tras
-
Burn .iso image from CD or DVD
Hi, How do I create an .iso file from a CD or DVD in Mac OS X? Thanks for your help.
-
UTF8 DB using third party package
I have an Oracle DB defined with the UTF8 characterset. I can use Oracle Forms to insert and retrieve multibyte characters from the DB however, I have not been able to retrieve multibyte characters using third party packages. These packages can retri