I tried to update my iPod, but it failed. Now I need to restore it, but it doesn't even show up in iTunes. What do I do?

I tried updating my itouch, but it failed. Now it keeps showing the connect to iTunes symbol, but it soesn't even show up in  iTunes. What do I do??

Follow All the instructions in this Support Article...
Unable to Update or Restore
http://support.apple.com/kb/HT1808

Similar Messages

  • I tried to update my ipod but then it didnt work saying that an unknow error has occured, now itunes is not recognising that an ipod has been plugged in and the picture that comes up when you first get it is on my screen, i dont know what to do?

    i tried to update my ipod but then it didnt work saying that an unknown error has occured, now itunes is not recognising that an ipod has been plugged in and the picture that comes up when you first get it (an arrow leading to the itunes sign) is on my screen, i dont know what to do?

    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Error 1600, 1601, 1602
    Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.

  • Trying to update my ipod but i get the error message network timed out.  I've already uninstalled and reinstalled the latest version of itunes. I also do not have software update in settings on the ipod. How do i get the ipod to update?

    trying to update my ipod but i get the error message network timed out.  I've already uninstalled and reinstalled the latest version of itunes. I also do not have software update in settings on the ipod. How do i get the ipod to update?

    Try the manual method specified here:
    iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch

  • I am trying to update my iPod but I can't until I sync it. However when i try to sync it a message pops up and says "Blythes iPod" can not be synced because a session can not be started with this device. What do I do? Help!

    I am trying to update my iPod but I can't until I sync it. However when i try to sync it a message pops up and says "Blythes iPod" can not be synced because a session can not be started with this device. What do I do? Help!

    https://support.apple.com/kb/TS1567
    Ah, it has been mentioned daily esp since iOS 5 / iTunes 10.5 but has always been there as an issue.
    Order of attempts:
    Repair the installers
    Uninstall EVERY Apple component (auto and manual)
    Services: Restart all 3 Apple items (AMS, Bonjour, iPod)
    I* always do the last almost, then launch iTunes, and only then connect iPod.
    IF you see a yellow alert in Devices and Printers or in Device Manager, then I could find NO WAY to fix or repair other than a clean OS. Something messed up the device driver support.
    If/when Windows asks "what to do when it detects iPod"? don't chose any default action, to me, based on hunch and 3 PCs, that seems to mess AMS up for some reason.
    Tried with Windows 7 64-bit Pro and Home Premium, and also Deve Preview 8 (which other than the inability to update iOS to 5.0 seems to run better -- except when it comes to AMS thing! so seems Apple is not on the same page writitng drivers.

  • I tried to update my ipod, but it now it is not going past the apple sign.

    I tried to update my ipod. but now its stuck.
    if you turn it on, you can´t get past the apple sign.
    I tried to restore it with itunes, but it says it can not restore.
    because you have to get the latest version of itunes.
    but I already have the latest version, so I can not restore.
    please help, because I can not do anything with it now..

    - On your computer go to iTunes>Preferences>Devices and see if a backup is listed.
    - For iCloud backup. , with the iPod setup with the same iCloud account go to Settings>iCloud>Storage and Backup>Manage Storage and see if one is listed.

  • HT4623 Hi. I'm trying to update my iPod but the update software  option is not available. What should I do?

    Hi. I'm trying to update my iPod but the update software option is not available.
    Does anyone know what I should do?

    Liamatron wrote:
    Hi. I'm trying to update my iPod but the update software option is not available.
    That is only a feature of iOS 5 or later...
    If you have iOS 4... See Here...
    http://support.apple.com/kb/HT4972
    OR...
    Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
    If an Update Appears Install it...
    if not... you are up to date for your particular Device...
    See the Using iTunes Section Here...
    How to update your iPhone, iPad, or iPod touch

  • I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer."  I have tried to update my settings, but this doesn't seem to work.  Any help would be much appreciated

    I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer."  I have tried to update my settings, but this doesn't seem to work.  Any help would be much appreciated

    Hard Drive:  The Hard Drive is on my camera (Sony Handycam)
    Just needed some info on what is going on with your particular system.
    Knowing the exact camera model will also assist us.
    If this camera is standard AVCHD you should be able to connect with USB to Mac with FCE open and use Log and Transfer without all the fiddling around converting etc.
    What FCE does during ingest is convert files to AIC. (Apple Intermediate Codec)
    FCE cannot read the individual files in the BDMV folder, that's why all the converting is required when you use that method.
    BTW: regards formatting drives/cards/memory on cameras; it is wise to use the actual device to format rather than a computer. This is a prime cause of read/write goof ups with solid state media. This applies to still or video cameras.
    Keeping the COMPLETE card/memory structure in tact is vital for successful transfers.
    Try here for some trouble shooting tips:
    https://discussions.apple.com/message/12682263#12682263
    Al

  • Why won't my ipod touch sync? It is all up to date and everything, and i know it is connected because when i plug it into my computer it charges, but it doesn't even show that it is connected so i can't sync all my new songs:(

    Why won't my ipod touch sync? It is all up to date and everything, and i know it is connected because when i plug it into my computer it charges, but it doesn't even show that it is connected so i can't sync all my new songs:(

    http://support.apple.com/kb/TS1538
    http://support.apple.com/kb/TS1591

  • Im trying to update my ipod but when i go to the general there is no system update for me to click on. How do i update it without it being on there?

    Im trying to update my ipod to ios 5 or later and when i go to general to try and update it, there is no system update for me to update it. I bought it used to i dont know if the person before me deleted it or how i go about getting system update back on there in order for me to proceed it the update. Any help would be great.

    Note your iPod may not support iOS 5
    To update
    The Settings>General>Software Update comes with iOS 5 and later.
    Connect the iPod to your computer and update via iTunes as far as your iPod model allows
    iOS: How to update your iPhone, iPad, or iPod touch
    A 1G iPod can go to iOS 2.2 via iTunes and iOS 3.1.3 via
    Purchasing iOS 3.1 Software Update for iPod touch (1st generation)       
    https://buy.itunes.apple.com/WebObjects/MZFinance.woa/wa/touchLegacyLandingPage
    A 2G to 4.2.1. Requires iTunes version 10.X. If a Mac it requires OSX 10.5.8 or later. With OSX 10.4.11 you can only go to iTunes 9.X which gets you as high as iOS 4.1
    A 3G to 5.1.1  Requires iTunes version 10.5 or later
    A 4G to 6.1.3  Requires iTunes version 10.7 or later. For a Mac, that requires a Mac with OSX 10.6.8 or later
    Identifying iPod models

  • Im trying to update my IPAD but it doesn't give me the option to do it.

    I've been trying to update my IPAD but when I go to settings and click on General, I don't have the option to update.  What am i doing wrong?

    That is only a feature of iOS 5 or later...
    If you have iOS 4... See Here...
    http://support.apple.com/kb/HT4972
    OR...
    Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
    If an Update Appears Install it... if not... you are up to date for your particular Device...
    See the Using iTunes Section Here...
    How to update your iPhone, iPad, or iPod touch
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download
    NOTE:
    The iPad 1 can only update to iOS 5.1.1

  • Bought two songs from iTunes store on my iPhone 4s. Tried bringing the songs from my phone to my computer iTunes through iCloud but it doesn't even show the option to choose music?

    My computer has been authorised and has the newest version of iTunes. My iPhone shoes the option of choosing my computer's music but my computer doesn't even show the option of music, but shows apps, movies, tv-shows and books. When i choose the option of find music to download from my phone, it says i have downloaded all yet i haven't and the music isn't in my library.
    This was my first time when i bought anything from iTunes store and it also shows in my account information that i have bought these two songs but when trying to download them from my iCloud it doesn't work. Also when i click on the songs in my iTunes store on my computer, it says i have bought them but doesn't show the option of playing them. Is the problem in my iPhone or is this something to do with the songs' copyrights?

    Hi Petrafin,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots.
    You can download your purchases directly to your computer.
    Downloading past purchases from the iTunes Store, App Store, and iBooks Store
    http://support.apple.com/kb/HT2519
    Cheers,
    - Judy

  • I tryed to Update My ipod but it says Error -306

    So , I'm on iTunes and it tells me that i need to Update my ipod. So i download the ioS 5 & right after i download it, It says ERROR -30 or ERROR -306 . && I have downloaded it Like about 3 Times already . But it says the SAME THING OVER & OVER ! And i REALLY need to update my ipod because when im on safari for less than 15 Minutes, it takes me back to home & Its really Irrating ! I want to update it . PLEASE HELP ! & Also, i dont want to Spend like 100 Dollars for Apple to do something that i could have done myself . Thank you for your time .

      Yeah , you were right . . There is something wrong

  • Since i up graded to itunes 10.5.2 i cannot access itunes store fully ,i have apple mobile device exe eating my cpu at 97% and now i tried to sync my ipod and it said that i needed to restore my ipod ,this i did and now i cant access my ipod library

    this has got ridiculous now i cant access itunes tore,my ipod says there is no music on it even though i watched it sync nearly 5000 tunes and the program apple mobile device exe eats my cpu at 97% it slows my computer to a crawl should have had the courage of my convictions and stuck to itunes version9 at least that worked.tried resetting netsh winsock,flushing my dns all not worked.this has to be sorted out...and quick

    Hi,
    I have tried and confimed that you can download the previous version from some web-site about the version 10.5.1.42.
    Remove/un-install 10.5.2.11 and restart your computer.
    Install the old version 10.5.1.42
    and then you can find the "Devices" on the left column and showing synchronizing when you connect the cable.
    Good luck

  • On one website I go to for work, it says connection reset while page was loading. I was trying to change the permissions for this website but it doesn't even show up in my permission list. Help please. I need this website for work.

    I have contacted this website tech support and they say this issue is on my end. On certain pages on their web site I try go to it will say connection reset. Connection reset while page was loading. I was trying to do anything and everything I can to make sure firefox is allowing access to all pages on this website. I use this website for work I do.

    The "The connection was reset" error message can be caused by a bug fix for the BEAST (Browser Exploit Against SSL/TLS) attack that the server doesn't handle.
    *[[/questions/918127]]
    *[[/questions/918028]]
    See comment 60 in this bug report for workaround, but be aware that this makes you vulnerable to that BEAST attack.
    *[https://bugzilla.mozilla.org/show_bug.cgi?id=702111 bug 702111] - Servers intolerant to 1/n-1 record splitting. "The connection was reset"

  • I tried to update my ipod and it didnt work,I think it got a virus and then  tried to recover it but it didnt work. What should i do?

    I tried to update my ipod but it didnt work and it turned off, it came up with the plug and the itunes symbol when i turned it on and thats all. So i plugged it in itunes and then tried to restore it but everytime i tried to restore it, it didnt work! So i took it to harvey norman, to see if they could fix it or restore it but they couldnt fix it . So, what should i do?

    Without more information like what happens when you restore the iPod all I can suggest is:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

Maybe you are looking for

  • How to find out and locate the top 100 max elements from a 4D array

    I try to find out the 100 maximum elements in a 4D array and then I want to put the result in a 2D array, Which should show me the locations of the elements and the values of those elements ==================== =Labview 7.0 & 8.0 & 8.5= =============

  • Lightroom 4.4 will not recognise ARW files from Sony RX10

    I have tried reinstalling LR - still doesn't work. It says all products uptodate as well. Any ideas? My Mac can read the files fine and displays them correctly in iPhoto

  • Trying to build my own edit suite

    What are the basic components to a good FCP system to broadcast master tape. I'm looking to get at least 10 bit quality at the cheapest price. I have G5 2.3 Dual processor 1 gig of RAM 1 media drive at 300 GIG (7200) 23 Cinema Display I know I need a

  • Adjusting Edit template in Web app

    Hi All, Is it possible to adjust the edit template in a web app so that certain users can edit only certain fields? I am using a web app to submit insurance claims for cell phone repairs, my technicans on my premises should have access to all fields

  • Seems like you can't get there from here...

    Okay, so here's the deal. I've authored a delightful software manual in Word. Now I want to bring it into RH X5 with the option of outputting both .CHM and .HLP (preferably WinHelp 2000). * If I import my .DOC file into RH for Word, it loses the comp