I tried to update my ipod, but it now it is not going past the apple sign.

I tried to update my ipod. but now its stuck.
if you turn it on, you can´t get past the apple sign.
I tried to restore it with itunes, but it says it can not restore.
because you have to get the latest version of itunes.
but I already have the latest version, so I can not restore.
please help, because I can not do anything with it now..

- On your computer go to iTunes>Preferences>Devices and see if a backup is listed.
- For iCloud backup. , with the iPod setup with the same iCloud account go to Settings>iCloud>Storage and Backup>Manage Storage and see if one is listed.

Similar Messages

Tryed to update my ipod touch last night, today it is frozen with the Apple symbol on the screen.

tryed to update my ipod touch last night, today it is frozen with the Apple symbol on the screen.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Every time i connect my iPhone 4 to any outlet in never goes past the apple sign, I've tried turning it on regularly but nothing at all happens unless i connect it to my laptop but again it won't go farther than the apple. it IS fully charged.

help!

hi, have you tried a hard reset, remove the sim card, wait a few minutes, re-insert the sim card and power back on?
alternatively does itunes still recognise the device, can you do a system restore?

I tried to update my ipod but then it didnt work saying that an unknow error has occured, now itunes is not recognising that an ipod has been plugged in and the picture that comes up when you first get it is on my screen, i dont know what to do?

i tried to update my ipod but then it didnt work saying that an unknown error has occured, now itunes is not recognising that an ipod has been plugged in and the picture that comes up when you first get it (an arrow leading to the itunes sign) is on my screen, i dont know what to do?

Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.

Trying to update my ipod but i get the error message network timed out. I've already uninstalled and reinstalled the latest version of itunes. I also do not have software update in settings on the ipod. How do i get the ipod to update?

trying to update my ipod but i get the error message network timed out. I've already uninstalled and reinstalled the latest version of itunes. I also do not have software update in settings on the ipod. How do i get the ipod to update?

Try the manual method specified here:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch

I am trying to update my iPod but I can't until I sync it. However when i try to sync it a message pops up and says "Blythes iPod" can not be synced because a session can not be started with this device. What do I do? Help!

I am trying to update my iPod but I can't until I sync it. However when i try to sync it a message pops up and says "Blythes iPod" can not be synced because a session can not be started with this device. What do I do? Help!

https://support.apple.com/kb/TS1567
Ah, it has been mentioned daily esp since iOS 5 / iTunes 10.5 but has always been there as an issue.
Order of attempts:
Repair the installers
Uninstall EVERY Apple component (auto and manual)
Services: Restart all 3 Apple items (AMS, Bonjour, iPod)
I* always do the last almost, then launch iTunes, and only then connect iPod.
IF you see a yellow alert in Devices and Printers or in Device Manager, then I could find NO WAY to fix or repair other than a clean OS. Something messed up the device driver support.
If/when Windows asks "what to do when it detects iPod"? don't chose any default action, to me, based on hunch and 3 PCs, that seems to mess AMS up for some reason.
Tried with Windows 7 64-bit Pro and Home Premium, and also Deve Preview 8 (which other than the inability to update iOS to 5.0 seems to run better -- except when it comes to AMS thing! so seems Apple is not on the same page writitng drivers.

HT4623 Hi. I'm trying to update my iPod but the update software option is not available. What should I do?

Hi. I'm trying to update my iPod but the update software option is not available.
Does anyone know what I should do?

Liamatron wrote:
Hi. I'm trying to update my iPod but the update software option is not available.
That is only a feature of iOS 5 or later...
If you have iOS 4... See Here...
http://support.apple.com/kb/HT4972
OR...
Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
If an Update Appears Install it...
if not... you are up to date for your particular Device...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch

I tried to update my ipod touch and now i lost everything. i have music backed up but not my apps. Anyone have suggestions?

I tried to update my ipod touch and now I lost everything- music and apps. My music is backed up on an external drive, but not my apps. How can I restore my apps (some were purchased, some were free)?

If you remember what they are, you can download them again (you will not be charged).
You might wish to sync everything in the future. It makes it a snap to recover when necessary.

I tried updating my iphone to a new verison but after the update the phone is not restarting, just the apple sign is showing up on the screen. what is the problem?

i have tried updating my iphone to a newer version but after the update was completed the phone is not restarting, just the apple logo is showing up on the screen. what is causing that problem?

Re: i tried updating my iphone to a new verison but after the update the phone is not restarting, just the apple sign is showing up on the screen. what is the problem?
I have tried the above fix and iTunes crashes giving error 27 after trying to load the iPhone firmware.
I have booted my phone in DFU mode and this has made no difference.
My mac is up to date.
My iTunes is up to date.
All i tried to do was update my ios as i have been unable to make calls or send text's all day.
Do you have any other suggestions as my phone is no good to me now.
Many thanks,
Lyd_v

I am trying to update my iTunes but it keeps saying that it cannot find the correct path...Any suggestions?

I am trying to update my iTunes but it keeps saying that it cannot find the correct path...Any suggestions?

Hey b.elyse
Check out the following article that will assist with removing iTunes. Make sure to follow the order to ensure that it removed properly.
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/ht1925
Thanks for using Apple Support Communities.
Regards,
-Norm G.

HT201210 hi,am trying to restore my ipod but i am getting this message each time:the ipod could not be restored-an unknown error occured,what should i do?

hi,am trying to restore my ipod but i am getting this message each time:the ipod could not be restored-an unknown error occured,what should i do?

Was the complete wording of the error message? Usually an error number or other information is also provided

HT201263 I tried to update software on my i phone 4s and the phone will not restart past the apple logo? The logo keeps flashing up but wont go further.. please help!

I tried to update software on my i phone 4s and the phone will not restart past the apple logo? The logo keeps flashing up but wont go further.. please help!

Place the phone in recovery or DFU mode (search Google) and restore.

HT1212 IPAD is Disabled, tried to connect via itunes but get error "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."

IPAD is Disabled, tried to connect via itunes but get error "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

My early Intel iMac running Snow Leopard will not boot past the apple logo. I have tried holding the c key and inserting the install disk, but nothing. What do I try next?

My early Intel iMac running Snow Leopard will not boot past the apple logo. I have tried holding the c key and inserting the install disk, but nothing. What do I try next?

I have tried resetting PRAM and all other items listed in the Apple support site. This happened after an update to iTunes was added. Also this is happening to other people. Please help.

HT201210 My phone keeps turning itself off and I have to hold down the buttons to reset it today I tried to do the same but no luck and it just froze with the apple sign or the battery power sign what can I do?

My phone keeps turning itself off and I have to hold down the buttons to reset it today I tried to do the same but no luck and it just froze with the apple sign or the battery power sign what can I do?

See this article how to go about restoring your device from recovery mode:
http://support.apple.com/kb/HT1808
Good luck!

I tried to update my ipod, but it now it is not going past the apple sign.

Similar Messages

Maybe you are looking for