I tried to update my ipod software and it says the software for my ipod has been corrupted during download, what do i do? ive tried to download it several times again but that always pops up.
I blocked out my name but basically this is what i keep getting, also my internet is always one while i do this.
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Similar Messages
-
when I am trying to download IPad updates I get the message "Your Apple ID has been disabled". What does this mean? How do I get my ID enabled again? Still got more than 50$ in my account !
Reset your Apple ID password here > Apple - My Apple ID
More information here > Apple ID: "This Apple ID has been disabled for security reasons" appears -
I am running on a Mac (Lion) with FF 25.0. I typically hide the toolbar because I like to max out my screen space without having to go into full screen mode. So I typically use a custom keyboard command to navigate forward and back during my browser session, but occasionally the keyboard command fails and the page is unresponsive. In the past all I had to do was go up to the History drop down menu and choose "Back" or "Forward". I would also use the "Home" selection to get back to my homepage. But ever since I updated to 25.0 those selection are now gone from the History menu.
Is there any way to restore them? And are they gone for all users (was this a global change) or are one of my add-ons simply not playing nice and causing this problem? TIA!On WinXP Back, Forward, and Home was last in the Firefox 3.6 versions and disappeared as of Firefox 4.0 - and hasn't been seen since.
Doesn't the Mac OSX versions of Firefox have Back and Forward in the context menu (right-click), as Windows and Linux versions do? -
Please help
Restore it as new. Why wouldn't you do that when purchasing a used device from another individual?
-
Ok so i have this iPod touch (3rd gen) and i'm trying to update it through iTunes and when i click check for update it keeps saying this version of iPod software (2.2.1) is your current version. what do i do? how do i update it?
You have a 1st generation iPod Touch. It can not be upgraded beyond iOS 3.1.3, it is available at the link below.
http://support.apple.com/kb/HT2052 -
I am trying to update my phone. And it says it's up to date with 7.1 something but I want IOS 8?
I am trying to update my phone. And it says it's up to date with 7.1 something but I want IOS 8?
An iPhone 4 can't be updated past 7.1.2.
(123402) -
I have tried to update my Facebook app and it says there's not enough available storage to download it - I have deleted lots of apps to try and make more space but still not enough what can I do?
Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.
-
I found my old ipod touch and it says the ipod is disabled and to connect it to itunes but when i try to connect it to itunes it says cannot connect cause ipod has passcode but i cant unlock passcode cause ipod disabled. Please anyone have an idea?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... -
i am trying to reinstall itunes 10.5 and am getting the following error message.
An error occurred during the installation of assembly “Microsoft.VC80.CRT.type=”win32”.version=”8.0.50727.6195”.publicKeyToken=”1fc8b 3b9a1e18e3b”.processorArchitecture=”x86””. Please refer to Help and Support for more information. HRESULT:0X800736B3.
Anyone know how to fix this?same problem. tried the ff fixes from microsoft but no joy
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/gett ing-error-message-an-error-occurred-during-the/10122022-2d88-4266-a695-6c6ddeafd 019?tab=AllReplies&page=1
http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/ windows-vista-unable-to-install-itunes-an-error/19b48df7-54c8-47f3-8854-d34118fa a79a
http://support.microsoft.com/mats/system_maintenance_for_windows/en-us
other ideas would be appreciated.
cheers -
When using tethered capture I often get this notification "The metadata for this photo has been changed by both Lightroom and another application". This slows or stalls the loading of incoming photos. How do I find out which other application is changing the metadata and stop it?
Thanks Sean,
I've had a look at the TC settings dialog and tried to keep it as simple as possible. I also had a copy of LR 4 on the hard drive so have trashed that also incase of any conflicts. LR seems to be running ok now but as said it's an intermittent problem.
I also have a copy of Capture One on the hard drive so am going to uninstall that also in case it is trying to launch. -
Record about my phone (bought in Verizon store and connected to Verizon for 4 years) has been corrupted and now I can not make any changes to my data plan. Several sessions with the technical support and management have not resolved this issue. Each time technical people and top managers promised that this issue will be resolve tomorrow and they will cal me. Nothing happend!! I can not even cancel my service not just to upgrade it. Completely locked.
Any advice?
Thanks.
Alex.Cannot figure out what your talking about since it makes no sense.
If you are the account owner you can go to the My Verizon web portal http://www.verizonwireless.com
You must log in with your cell number and your my Verizon portal password. Not the account pin.
Once there you can change your plan and services. However repeated incorrect login attempts will lock you out of the site. It a fraud prevention measure.
1-800-922-0204 call support with your cell number and or account number and account pin and they can assist you.
If you don't have the information then there is nothing they can do.
If you can verify who you are they may be able to reset your account access. But only if you are the account owner.
Good Luck -
I downloaded Mac OS X Lion and when I go to install, it says file cannot be verified, may have been corrupted during download. How do I determine if it is corrupt and how do I get a clean copy of Lion, since I have already paid for it?
Download again, move the existing file out of the applications folder first.
-
I download latest updates for itunes and my iphone, when it comes to installing, it successfully downloads, but then i get a message for iphone software error=1403 file corrupted, and for itunes it downloads, then when i try to install it a message says unable to install software, file maybe corrupted!!
The iTunes update must be downloaded and installed before you try and use it to update the iPhone OS
Download iTunes 10.2.2 from here: http://support.apple.com/kb/DL1103
When it completes it will auto mount the disc image and show you the package installer, don't try and do anything with the file until it gets to this stage.
Once that's installed reboot the Mac, run iTunes, connect your iPhone and let it sync, then hit the update button and let it complete that step by itself (which will require a restart of the iPhone) -
Rec'd prompt to update - tried to update - updater would not stop/has not stopped, tries to update automatically every start up.
Although I have deleted, FF downloaded several copies on update download.
I have to cancel attempting update and remove entry, then close to be able to then use browser.What you are experiencing is 100% related to Malware.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us! -
I am trying to update my credit card info - no longer using credit card and trying to put in a debit card and it wont accept?????
You are probably entering your Visa's security code incorrectly. Here's how to find it:
http://support.apple.com/kb/HT3541
Maybe you are looking for
-
I am trying to activate the BW 3.5 Web Service for Accessing Query Data as per the link given below: http://help.sap.com/saphelp_nw04/helpdata/en/d8/3bfc3f8fc2c542e10000000a1550b0/content.htm I was able to release the service when I try to chk and sa
-
hi, i am trying to deploy an application created and built under java 1.4. in fact, im using some functionality provided by 1.4 only. now if i deploy it in oc4j release 2(9.0.3) it gives a version problem saying that class version for java.lang.Objec
-
FileDownloadActionListener in ADF
Hi, I am new to ADF. Here is my requirement, when I click on OK button, I need to insert the data into database, once that is done, need to download the file from a certain location. For which I have confirgured the command button as below., <af:comm
-
A few How-To questions on E6-00
1. How do I set a one-touch button to open camera ? I know it's possible on the E72, couldn't figure why it shouldn't be possible on my E6, I guess I just couldn't find it myself. 2. How to check battery level ? Previously, when I used to have the
-
Having trouble using the replace() function
Hey everybody. :) I've written a query which finds the address for a company (from 5 columns and concatenates them into one). These columns are street, town, county, telno and faxno. Some of the companies have a null value for the county, so when I w