I tried to update my iPod touch, but now its stuck in recovery mode.

Okay so I plugged my iPod into my computer today and it said there was a new update available. I clicked update, but after it finished syncing/updating it went into recovery mode. It says I need to restore the iPod, but everytime I restore it, it just goes back into recovery mode. Iv'e tried shutting it off but it doesn't help

Go into Recovery Mode per the instructions here.

Similar Messages

  • I just tried to update my iphone 4 to the 5.01. My iphone  backed up and started update but now its stuck in recovery mode and will not restore. It gives me an error message of 1, but I have tried everything on troubleshoot list and still wont work!!!!

    I just tried to update my iphone 4 to the 5.01. It said that my phone backed up and started update. i went on a run and came back and my phone is now stuck in recovery mode. It keeps saying that there is an unknown error, 1. I have tried everything on the troubleshooting list and cannot figure out what is wrong! Please HELP!!!

    http://support.apple.com/kb/TS3694#error1

  • My iPod touch 5th g. is stuck on recovery mode, before this i was trying to update it to ios8. I'm trying to connect it to iTunes but its under unspecified and doesn't connect to itunes(asus eee pc) What do i do?

    my iPod touch 5th g. is stuck on recovery mode, before this i was trying to update it to iOS8. I'm trying to connect it to iTunes but its under unspecified and doesn't connect to iTunes(Asus Eee pc) What do i do? please help me.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     
    And as necessary:
    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or                     
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • Im trying to update my ipod touch but it tells me that it was corrupted what do i do?, im trying to update my ipod touch but it tells me that it was corrupted what do i do?

    im trying to update the ipod touch but it tells me that its been corrupted what should i do?

    Try disabling the computer's antivirus and firewall.
    - Next try the manual install method of:
    iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
    - Then try on another computer
    - Try when connected to another network

  • I am trying to update my ipod touch but it says that the update was corrupted during download

    I am trying to update my ipod touch but it says that the update was corrupted during download

    Try disabling the computer's antivirus and firewall.
    - Next try the manual install method of:
    iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
    - Then try on another computer
    - Try when connected to another network

  • I tried to update my ipod touch and now i lost everything. i have music backed up but not my apps. Anyone have suggestions?

    I tried to update my ipod touch and now I lost everything- music and apps. My music is backed up on an external drive, but not my apps. How can I restore my apps (some were purchased, some were free)?

    If you remember what they are, you can download them again (you will not be charged).
    You might wish to sync everything in the future.  It makes it a snap to recover when necessary.

  • TS1363 My Ipod touch 4th Generation, Is stuck in recovery mode.

    Okay, my Ipod touch 4th generation, Is stuck in recovery mode after trying to restore and update it to the latest software. The restore failed and it's now stuck in Recovery mode. I've tried everything, and it just wont work. It won't even recognise in Itunes. Help?

    I don't know if you will see or get this because issue is old but I thought I'd try anyway.  This is what happened to me.  I don't see any responses, if you don't mind me asking, what ever happened with your ipod?  This is my son's and I don't have a store around the corner so I was curious before I make a trip?

  • My iPod touch 4th gen is stuck in recovery mode with a broken 'lock' button.

    My iPod touch 4th generation is stuck in recovery mode with a black screen and I can't get it out. It has a broken lock button and I have tried everything to get it out of recovery mode. Every time I plug it into iTunes, it recognises my iPod and says 'iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used in iTunes, so I have restored it several times and every time, it says there is an unknown error. Please Help!! (my iPod is IOS 6.0.1)

    What is the complete wording of the error message that says unknown error? Usually more information like a error number is also given.

  • HT4972 trying to update my ipod touch but want show me any updates....how can i update

    please help.....walk through

    To update
    The Settings>General>Software Update comes with iOS 5 and later.
    Connect the iPod to your computer and update via iTunes as far as your iPod model allows
    iOS: How to update your iPhone, iPad, or iPod touch
    A 1G iPod can go to iOS 2.2 via iTunes and iOS 3.1.3 via
    Purchasing iOS 3.1 Software Update for iPod touch (1st generation)       
    https://buy.itunes.apple.com/WebObjects/MZFinance.woa/wa/touchLegacyLandingPage
    - A 2G to 4.2.1. Requires iTunes version 1o or higher. If a Mac it requires OSX 10.5.8 or later.
    - A 3G to 5.1.1  Requires iTunes version 10.5 or later
    - A 4G to 6.1.5  Requires iTunes version 10.7 or later. For a Mac, that requires a Mac with OSX 10.6.8 or later
    - A 5G to iOS 7. Requires iTunes 11.1 or later if you update via iTunes
    Identifying iPod models
    I suspect y have a 1G iPod. Those can only go to 3.1.3. If your iPod does not have volume buttons on the upper left edge it is a 1G

  • Daughter's iPod touch 4th gen is stuck in recovery mode, won't turn on after I restore it, please help...

    My daughters iPod touch 4th gen is STUCK. Somehow it was disabled because of too many password attempts (my younger daughter was pushing numbers). I connected it to iTunes, did the press and hold power button + home button, then let go of sleep button. iTunes recognized it, gave me the option to restore it and did its thing. Here's the problem, now it won't GET OUT of that mode. After the first attempt, it wouldn't power on after I disconnected it from the computer. So I hooked it up again, and it says its detected an iPod in recovery mode and offers me the same "update & restore" option it did originally. Now what??? Please help. My daughter just got this two weeks ago for her birthday.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       
    or
    Maybe:
    Restore loop (being prompted to restore again after a restore successfully completes)
    Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
    Next try placing in DFU mode and then restoring.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Then try restoring on another computer.
    Last, make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • My ipod touch second gen is stuck in recovery mode.... :(

    i jail broke my ipod touch so i could use the av wire in it and i noticed that it made my ipod slower. so i went to take it off and while it was restoring it stopped when i was almost done and said"itunes could not restore" so now everytime i try and restore i wont do it and my ipod is stuck in recovery mode telling me to plug it in to itunes

    Ok, now I don't know what 'jail breaking to use the av wire in it' is at all but a few days after my iTouch 4 obtained 2 diagonal cracks in the glass after dropping it on my bathrooms marble floor. I can only guess it hit right on the corner. Now before I had a chance to get it fixed something happened while playing a game and screen blanked out. To make an already too long a story a bit shorter ... It ended up having to restore it. While restoring mine too is stuck in Restore mode, never quite making it all the way to the end before whiting Out screen then once again being told to connect to iTunes. Help anyone???

  • My iPod touch 5th gen. is stuck in recovery mode giving me error 3/error 37/etc.

    So yeah, it's stuck there. It started happening about a month and a half ago, and when I finally brought it to the Apple Store for the first time they plugged it in and bam it was fixed. It was good for 1-2 weeks, and then suddenly, bam, problem is back and would come back every week or so. Finally, after the third time to the store, the employee ran some sort of test to check if the hardware was messed up. It turned out that it had already crashed a minute after the successful restore. So they replaced it. Went to pick it up today, brought it home, went to restore it from back up and all was good. iTunes then prompted me to update the iOS, so I did. It crashed and now I'm stuck in recovery mode. So basically back to zero. I'm really kind of depressed about this and I'm going to the store tommorrow, but I was wondering if anyone could possibly have some help to offer.

    Check for hardware issues
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
    Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar                              

  • Trying to restore iphone 4s to factory settings, now its stuck on recovery mode???

    trying to restore iphone 4s to factory settings but is stuck on recovery mode. home button does not work. can anybody help me? i have tried to restoer it several times but it wont work??

    try a different cable a different usb port, drop all security software and fire wall, try a different computer here are the steps
    recovery mode
    open itunes on computer
    plug cable into computer not iOS device
    turn device off
    hold home button and plug cable into IOS device.  do not release home button until an itunes graphic appears on IOS device.
    look to computer should have message about recovery mode click ok and restore
    Peace, Clyde
    if u need an article see
    http://support.apple.com/kb/HT1808

  • I am trying to update my ipod touch.But ios6 will not down load

    i have an ipod touch 4 version 4.2.1 that i am trying to update to 6.1.3 How ever every time i try downloading it through itunes the download stops and after about 3 minutes i get a box saying my network has timed out. I have run the trouble shooteer on itunes and averything worked fime and i have no trouble downloading other apps can anyone help.

    still not working the update downloads but will not compete. i have even tried to just download the update to install it later, but the same thing happens

  • I tried to update my ipod touch but my itunes froze and i had to restart my computer and now it says i have to restore my ipod touch but it always freezes halfway what do i do?

    my itunes said to update my itunes and ipod touch and when i tried my itunes froze and i had to reset my computer and now my ipod has to restore and when it does it freezes what ddo i do?

    This seems to fit yu symptom:
    Hang during restore process: Following Troubleshooting security software will frequently resolve this error. This error can be caused by the default packet size being set incorrectly. There may be third-party software installed that modifies the default packet size in Windows by inserting a TcpWindowSize or MaxGlobalTcpWindowSize entry into the Registry. Contact the manufacturer of the software that installed the packet-size modification for assistance in adjusting this TcpWindowSize values. Typically the default packet size is modified by 3G cellular network card software, ISP communication software, or Internet speed download optimization software. There are legitimate reasons to change the TCP/IP packet size and not use the Windows default settings (for example, network traffic optimization, home/broadband optimization, enterprise app optimization such as database apps, Exchange, and more). Deleting the "TcpWindowSize" or "GlobalMaxTcpWindowSize" entries in Windows Registry could affect the system's performance with other apps or on their network connections. Deleting the customized TCP/IP settings may require the reinstallation of any third-party applications that had modified the TCP/IP settings from the Windows default settings.
    There are two ways to resolve this:
    You can follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) , or follow the steps below to manually find and remove TcpWindowSize and MaxGlobalTcpWindowSize entries from the Registry.
    For Windows XP, Windows Vista, Windows 7: Go to the C:\\Windows folder and launch regedit.
    Go to Edit > Find.
    Search for "TcpWindowSize" entries. There are typically multiple entries of TcpWindowSize/GlobalMaxTcpWindowSize spread throughout the entire Registry. If "TcpWindowSize" exists, one or more third-party applications have changed the user's default Windows settings for TCP/IP.
    Go to File and select Export. This step will export a copy of the Registry that can be used as a backup of the original settings.
    Delete the "TcpWindowSize" entry.
    Search for the next "TcpWindowSize" entry and delete each one until the Registry no longer has any "TcpWindowSize" entries.
    Close Regedit, restart the PC, and test.
    If you are uncertain as to why these registry entries exist and the PC is a business computer, contact your network administrator and determine what values TCP/IP can be set in their Windows Registry setting so that the PC can update or restore an iOS device rather than deleting the "TcpWindowSize" entry.
    If editing the registry does not resolve the issue, restoring on a different computer that did not install the communication software is the step most likely to resolve this issue.
    Above from:
    http://support.apple.com/kb/TS3694

Maybe you are looking for

  • Adobe Bridge CS6 (Mac) won't open .arw files from my Sony RX100. How do I get and install the right version of Camera Raw?

    Adobe Bridge CS6 (Mac) won't open .arw files from my Sony RX100. I was told to update Camera Raw to at least 7.2. I tried to download this but got a DNG Converter instead. Where is Camera Raw? (it does not show up in a search of my hard drive. There

  • LOV Custom error message

    hi I have a requirement to change the standard lov message when criteria element is null when i use the required property = true for the lov mapping and click on lov i get a message "You must enter a value for Category as criteria for the List Of Val

  • Using JSP to connect to an Access Database

    I need help on using JSP to connect to an Access database. This is the code I currently have connecting to a mySQL DB. I need to change it to connect to an Access DB. The reason I am switching DB's is because mySQL is no longer going to be carried by

  • N95 World Clock

    Hi, I have been using the World Clock feature on my N95, with just two cities... London and Caracas. The problem is that it is displaying the wrong time for Caracas because Venezuela has changed its official time from GMT -4:00 to GMT -4:30. There ha

  • Sqlplus thrrowing error

    THis is the error I run into when I run sqlplus at the command prompt. Below is the copy of the sysctl.conf file. Any ideas [oracle@localhost ~]$ sqlplus SQL*Plus: Release 10.2.0.1.0 - Production on Fri Dec 18 16:16:46 2009 Copyright (c) 1982, 2005,