I tried to update my ipod4 but now all it shows is that i need to plug into itunes on a computer
I tried to update my ipod4 but now all it shows is that i need to plug into itunes on a computer
Connect the iPod to your computer and restore via iTunes
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
Similar Messages
-
iPad 2 problem. After updating to IOS 8.0.2 iPad says that I need to plug into iTunes. When I do that, the only option is to restore iPad to factory settings? iPad will do nothing until then. I have never had this problem before. Help
Hi ..
Follow Apple's instructions for recovery mode here > iOS: Unable to update or restore
You can restore from a backup. -
i am a new mac user and tried to update my firefox but now i have multiple foxes and a half fox fix something? how do i get it all together in one and be sure i have current version on only?
Hi there
I think in this case, you may be best to speak with Microsoft about this, as it does seem like an issue with Office, and not your Mac.
Follow this link, to find your local Microsoft Support contact number.
Or perhaps create a new topic in the Microsoft Support Communities
Good luck -
i tried to update my ipod but then it didnt work saying that an unknown error has occured, now itunes is not recognising that an ipod has been plugged in and the picture that comes up when you first get it (an arrow leading to the itunes sign) is on my screen, i dont know what to do?
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software. -
I was trying to update my iPhone but now it is frozen on the black screen with the apple icon. It won't do anything. Any suggestions?
Is your iphone hacked/jailbroken?
-
help me to troubleshoot my ipad2 there is software update and i updated mine from 5.0 to 6 version but now the screen shows only usb cord arrow up sign then itunes and music logo. it has been like this since last night.what i will do?i even tried turning it off but it doesnt work too. i only see the apple logo and it comes back to cord image and itune then after 30 secs the screen turns black. help me please.
The iPad is telling you to connect your iPad to iTunes on your computer so do it. You may have to restore the device.
Restoring iOS Software.
http://support.apple.com/kb/ht1414
You may need this as well.
Unable to update or restore iPad.
http://support.apple.com/kb/ht4097 -
I am trying to update an app, but its asking to connect to a wifi or downlown it in itunes. There are several apps that need updating, I can't do either or, or maybe I just don't know how to do it.It's saying that the app is over 50MB. But it's not telling me which app. Help!!!!!!!!!
Well, I just purchased Linksys wifi and hooked it up. It's running fine. When I go to my IPhone settings to see is I'm connected to a wifi, it shows that I am not connected. When I hit my wifi to see or to connect, it takes me to the wifi networks and it's showing my secured wifi as being locked and my guess wifi as not locked. How do I sign in to my own wifi network.
-
I just updated my iTunes and now all of a sudden my iPhone is not syncing into iTunes. When I plug my iPhone into my computer, a thing pops up on my iPhone saying "Do you trust this computer" and I press "Trust" but it still doesn't do anything.
Sorted it out. If anyone has this problem i reccommend visiting http://forums.ilounge.com/ipod-classic-ipod-5g-video/237546-ipod-classic-80gb-fr eezes-itunes-need-restore-plz-help-2.html#post1403546 there's some pretty good advice on it. have to go into control panel and re-format iPod into NTFS file. good luck.
-
BF tried to update to ios6 on iphone 4 but crashed half way through saying it needed to plugged into iTunes and then restored so after it was 'restoring' he had an error message come up say to couldn't be restored....what should be do next as the phone is in a complete non working condition
Spent hours trying everything suggested and finally this morning hit on a solution. iTunes must be run as an administrator. Even though you are logged into your PC as an administrator, using the iTunes shortcut does not make you an administrator in iTunes. I found this out by using the diagnostics in iTunes and reading through the results report.
I am using Windows 7, so I clicked the start button and right clicked on iTunes and selected "Run as an adimistrator". The first restore attempt got the 4013 error. I then did the DFU thing, hold power and home buttons for 10 seconds, release power and continue holding home for 10 more seconds.
iTunes gave me the restore message and I clicked it. I clicked the restore iPhone button and it started. The drivers loaded a couple of times. I got the apple logo with the progress bar and this time instead of disappearing, it started to fill in.
End result, a successful restore to factory settings and a happy 14 year old.
Hope this helps others. -
When trying to update phone, a message says i have purchased items that have not been transferred to iTunes, what is this?
We need a bit more information to help.
Are you trying to update your iPhone using iTunes on your computer? If so, did you make purchases through the iTunes Store or App Store on your iPhone, and fail to sync them with your computer? That is the likely meaning of what you are seeing. If this is true, the purchases would be added to iTunes in your computer before the upgrade proceeds. -
n my app store i have one update which is angrybirds so i go to update it despite me not have and it say that i need to sign into (my) account i have two unauthorized apps FCP 10 and Motion 5 and i tried the other moving the masreceipt thingy help?
<E-mail Edited by Host>Have you checked to see whether the App Store appis hidden via Settings > General > Restrictions > Installing Apps being set 'on' ?
-
will I lose my photos in recovery mode? I tried to update to latest software and I received a message that iphone needs to be updated to factory settings. Please help. I cannot use iphone.
I would "guess", since you were in the middle of backing up, your backup is corrupt & most likely unusable. Only one way to find out though, & that's by trying to restore from that backup. If your pics are not there, they are gone.
-
I was downloading the latest iTunes and my computer shut off in the middle and now my phone is displaying that i need to connect to iTunes and iTunes is telling me that i need to restore my phone before it will work. I have pics that i have not uploaded yet, how do i get around this without restoring my phone? Thanks,
I have the exact same issue. I havent found our what is causing it either. Multaple re-install attempts with no success. I have to use Windows Media Center to burn audio discs. Any other advice?
-
I downloaded the new iOS 7.0.4 update to my iPhone 4S and on completion it is asking me to plug into iTunes! Why??
Not clear what you mean by "on completion" or how you are being "asked to" connect to iTunes.
Usually this means that the update failed, with the phone crashing and entering recovery mode, requiring that you restore it using iTunes. There are many reasons for this, the most common being that the phone was previously jailbroken. -
tried updating to ios 6 on iphone 4 has completely shut my phone off tells me i have to plug into itunes and restore to factory settings but will not let me do this?? need help???
Interceptor94 wrote:
What should I do short of restoring my phone to factory settings?
Nothing. The message means you MUST restore your phone to factory settings. There's no way around this . Your phone is in recovery mode. That's the only way to get it out.
Maybe you are looking for
-
Dual monitor stopped working after Mavericks installed
27-inch Mid 2010 iMac - upgraded to Mavericks, now LG monitor gives "no signal" error message. LG model is 27EA83, connection is via DisplayPort. It worked before (Lion) and also works with MBPro upgraded to Mavericks. The iMac recognizes the monitor
-
Customizing Country Version Error
I want to customize the country version. open spro SAP Reference IMG Enterprise Structur -> Localize Sample Organizational Unit -> Country Version Choose Country to install "DE" Chart of Account "IKR". Prompt for Workbench request Then i get these er
-
Why my macbook pro getting so hot while using two or more simple application???
Hi all, for last 4 month i have been used macbook pro. at the begin i didn't face any trouble. recently i found that when i ran two or more application at a time my notebook began start hot. it's very scaring for me. what shall i do now. one more thi
-
Developing Web dynpro FPM application
Hi All I need to implement "Exit" functionality in my component similar to the standard ESS components which uses IFPM interface. 1) I created a view 2) Added a button 3) On click of button i called a method say "<b>cancel</b>" of Component Cntroller
-
how can i get my phone to switch back on?? I have plugged it in and taken out the sim card and still nothing!