I tried to update my photo albums in my Iphone 4S. I could not, and the old photos were removed. I tried again to copy the albums in the Iphone from a PC Windows XP folder and it does not work.
I tried to update my photo albums in my Iphone 4S. I could not, and the old photos were removed. I tried again to copy the albums in the Iphone from a PC Windows XP folder and it does not work.
You can't activate any GSM iPhone without a valid sim card installed in the phone.
So, yes, you need to get a sim card.
Similar Messages
-
Hi I have the old photo shop elements 10 on my computer and want to update and was wondering what the differences between photoshop, lightroom and photoshop elements are?
Also when I upgrade does it have to be with a monthly membership or can I just purchase the product out right like you use to be able?You cannot "update" from what you have to any of the applications you mention. It will have to be a straight purchase or subscription at full price.
Photoshop is a professional level application that makes no apologies for its very long and steep learning curve.
Lightroom is all about volume, and very light editing.
The Photoshop Elements forum is at:
https://forums.adobe.com/community/photoshop_elements/content
Remember, you are not addressing Adobe here in the user forums. You are requesting help from volunteers users just like you who give their time free of charge. No one has any obligation to answer your questions.
I do not know where there is such a comparison table as you seek, but someone else might, or you can google. -
Using firefox 14.0.1. Loading a link using right-click and "Open Link In New Window", results in new window opening but address bar does not show URL. However, if I right click on a link and select "Open Link In New Tab", the Tab shows URL in address bar. So it's working when it's a New Tab but not a New Window.
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us! -
I have a 6th gen nano and windows 8.1. Itunes does not recognise my nano. I have tunes to download
B noir
Yes that is correct
Okay. Have you tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8 -
Dear experts,
I am having an issue when I try to create a WEBI document using Bex query through OLAP connection (Bics).
Due to variables exit, it is not possible to open query pannel in webi to choose wich dimensions to add to the webi document.
The window to select dimensions simply does not appear and I can't move forward!
In RSRT ou Bex Analyzer, the query is running fine without errors.
CMOD code is like this (I believe there is not any error as it is working flawless on other reports for other variable names):
WHEN 'ZREDT1'.
IF i_step = 2.
CLEAR wa2.
READ TABLE i_t_var_range INTO wa2 WITH KEY vnam = 'ZRE_DT_IN'.
* wa2-low = |{ v_year_h }12|.
IF sy-subrc EQ 0.
v_year_h = wa2-low(4) - 1.
CONCATENATE v_year_h '12' INTO wa1-low.
* wa1-low = wa2-low.
wa1-opt = 'EQ'.
wa1-sign = 'I'.
APPEND wa1 TO e_t_range.
ENDIF.
ENDIF.
WHEN 'ZREDT2'.
IF i_step = 2.
CLEAR wa2.
READ TABLE i_t_var_range INTO wa2 WITH KEY vnam = 'ZRE_DT_IN'.
IF sy-subrc EQ 0.
* wa2-low = |{ v_year_h }12|.
v_year_h = wa2-low(4) - 1.
CONCATENATE v_year_h '12' INTO wa1-low.
wa1-opt = 'EQ'.
wa1-sign = 'I'.
APPEND wa1 TO e_t_range.
ENDIF.
ENDIF.
Please provide assistance,
Thanks in advance,
Kind regards,
André OliveiraI solved it.
The problem was due to date coming to exit - as you know some time intervals start at 01-01-1000, and as I was calculating 1000-1 = 999
I was getting and interval from 99901 to 201405. Do not know if it was not working because CHAR NUMC6 was failing trying to recognize interval 99901 - 201405, but probably, this was the issue.
Thanks for your inputs,
Best regards,
André Oliveira -
My iPad and iPhone have the same syncing calendar but my Windows 7 PC with iCloud does not sync/show the same calendar...please help!
iCloud will not sycn a calendar from an external source. In order to use iCloud to sync it, you would have to move it to iCloud and stop using Google. I know how to do that on a Mac, but I'm not sure how to do it on a PC. If you're using Outlook, I suspect you export it as an .ics file to your desktop, then import it to the iCloud account in Outlook. I'm sure you could use Google to find the specific steps.
However, there's really no reason not to just use Google to sync your calendar across your devices. Instead, just continue to use Goole calendar on all your devices and they should stay in sync. Take a look at this video: http://www.youtube.com/watch?v=C0Jj0KFgbYI. -
Endpoint Protection error: The source folder for content does not exist.
I have a single SCCM 2012 SP1 CU4 server running on Windows Server 2012.
I have been using this for a little more than a month for Endpoint Protection and Windows Updates.
I just recently started seeing that my Endpoint Deployment Package has Failed. I click on "Content Status" and select the Endpoint package (which again shows Failed). I click on "View Status" and I get this
message in the "Error" tab:
The source folder for content does not exist.
The Asset Details point to the exact location that does not exist:
The source directory "\\<server>\updates\endpoint\6bd81fde-3a3f-4aa9-bf70-ba007891ca68" for package "<package>" does not exist.
I didn't change anything related to this, and that directory path (\\server\updates\endpoint) is
shared and is populated with a lot of other folders.
Is this possibly just a bad update file? Should I manually create that sub-folder that it says is missing?
Any help would be great! Thanks!Thanks for the quick reply, Torsten. (I often forget which logs to check for certain things).
There are six lines (3 errors -- in italics below) in the log around the same time frame. They read:
The source directory \\sccm-corp\updates\endpoint\6bd81fde-3a3f-4aa9-bf70-ba007891ca68 doesn't exist or the SMS service cannot access it, Win32 last error = 2 SMS_DISTRIBUTION_MANAGER 5/27/2014 11:54:46 AM
5920 (0x1720)
STATMSG: ID=2306 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SCCM-Corp.pdcarea.lcl SITE=PDC PID=6008 TID=5920 GMTDATE=Tue May 27 16:54:46.962 2014 ISTR0="\\sccm-corp\updates\endpoint\6bd81fde-3a3f-4aa9-bf70-ba007891ca68" ISTR1="PDC00063"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="PDC00063" SMS_DISTRIBUTION_MANAGER 5/27/2014 11:54:46 AM 5920 (0x1720)
Failed to take snapshot of one or more contents in package PDC00063 SMS_DISTRIBUTION_MANAGER 5/27/2014 11:54:46 AM 5920 (0x1720)
CDistributionSrcSQL::UpdateAvailableVersion PackageID=PDC00063, Version=10, Status=2302 SMS_DISTRIBUTION_MANAGER 5/27/2014 11:54:46 AM 5920 (0x1720)
STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SCCM-Corp.pdcarea.lcl SITE=PDC PID=6008 TID=5920 GMTDATE=Tue May 27 16:54:46.990 2014 ISTR0="Endpoint Protection Definition Updates" ISTR1="PDC00063" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="PDC00063" SMS_DISTRIBUTION_MANAGER 5/27/2014 11:54:46 AM 5920 (0x1720)
Failed to process package PDC00063 after 33 retries, will retry 67 more times SMS_DISTRIBUTION_MANAGER 5/27/2014 11:54:47 AM 5920 (0x1720) -
Aero in Windows 7 64bit home premium does not work. Aero display selections are grayed out.
Aero in Windows 7 64bit home premium does not work. Aero display selections are grayed out. HP 600-1315xt.
Have tried everything I can find on internet and here on HP. None of the suggestions worked. Windows fixit for windows could not fixit. Any suggestions are appreciated. I can always use my disks and rebuild the computer. A last resort.Hi,
It might be the graphic driver not compitable with the graphic device. Has there been a change to the graphic driver?
One thing you can try is to uninstall graphic driver and download the latest from Windows Update (if you haven't tried this). Here are the possible steps:
1. Go to Control Panel->Hardware and Sound->Device Manager, uninstall the graphic card driver by right clicking and select "uninstall". Make sure the option "Delete the driver software for this device" is selected.
2. Reboot the system.
3. Go to Control Panel->System and Security->Windows Update, click on "Optional updates" and find the driver for g210 and do the update.
I work on behalf o HP.
Please click the white Kudos star to say thanks.
Please click Accept As Solution if you found my response helpful. -
Trying to sync new photos from iphoto without having the old photo synced on ipad2 but when I select sync from iphoto the old photos are already included. How do I stop itunes from preselecting photos? Already tried selecting "selected albums, events, and faces, and automatically include" then I enter "no Events" with no success the photos still are being synced along with the new photos. I want to be able to add new photo and remove old photos. Please help this has taken a lot of my time trying to figure it out.
If I knew the answer I would have given it - but since it is not an iPhoto question I suggested
You might try the iPad forum - or the iTunes forum - this really is not an iPhoto question
LN -
Trying to sync new photos from iphoto without having the old photo synced on ipad2 but when I select sync from iphoto the old photos are already included. How do I stop itunes from preselecting photos? Already tried selecting "selected albums, events, and faces, and automatically include" then I enter "no Events" with no success the photos still are being synced along with the new photos. I want to be able to add new photo and remove old photos. Please help this has taken a lot of my time trying to figure it out.
If I knew the answer I would have given it - but since it is not an iPhoto question I suggested
You might try the iPad forum - or the iTunes forum - this really is not an iPhoto question
LN -
Windows XP Media Center Edition does not suport ipod nano...need programs
I was just informed by Apple Service that Windows XP Media Center does not support ipod nano, but that there are online programs available that would allow me to use my ipod with Windows XP Media Center. Does anyone know of these porgrams?? If so, could you recommend a website? Thanks!
was just informed by Apple Service that Windows XP Media Center does not support ipod nano
Correct. Sort of.
Windows Media Center is not a computer. Just as Mac OS is not a computer. It is a operating system. (a version of Windows XP).
You have a PC with Windows XP Media Center.
You cannot use Windows Media Center OS to load the iPod.
You need to load iTunes to manage the iPod.
And yes, you can use the iPod Nano on Windows XP Media Center.
See here -> iPod: System Requirements -
MDT 0xc0000098 The windows boot configuration data file does not contain a valid OS entry
hello,
i installed WDS+MDT for OS deployment. all was working fine.
Now i need our branch office to be able to deploy OS as well.
I installed a new Win 2008R2 server, and installed the WDS service on it.
When reading about this on the internet i saw i need, on the MDT at our main office, to make a link, under "Advanced Configuration" - "Linked Deployment Shares" to the new WDS server (I used this: http://www.balm.se/?p=115")
when doing so i entered the UNC path to the new server and then, on the created link, i right click and choose "Replicate now".
after doing so, i tried booting a laptop just to see if there is any impact, and now, I'm getting this error:
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. insert your windows installation disk and restart your computer
2. choose your language, and then click "Next"
3. Click "Repair your computer"
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: \Boot\BCD
Status: 0xc0000098
Info: The windows Boot Configuration Data file does not contain a valid OS entry.
I know that usually when I'm getting this message, it means that a previous MDT installation was started and did not finished correctly, and the are some [stuff] on the HD, so i do a partition erase and start over and all working fine.
Now it's not working. I tried several computer, even new ones, and NADA.
someone know the cause?
I know I read something, i don't remember where or how to find it, that when doing the steps I did, it alter\change some ini or xml, or something like this. is that true? any one know on what file do i need to look and see if something is misconfigured?
thanks a lot for your helphello,
i installed WDS+MDT for OS deployment. all was working fine.
Now i need our branch office to be able to deploy OS as well.
I installed a new Win 2008R2 server, and installed the WDS service on it.
When reading about this on the internet i saw i need, on the MDT at our main office, to make a link, under "Advanced Configuration" - "Linked Deployment Shares" to the new WDS server (I used this: http://www.balm.se/?p=115")
when doing so i entered the UNC path to the new server and then, on the created link, i right click and choose "Replicate now".
after doing so, i tried booting a laptop just to see if there is any impact, and now, I'm getting this error:
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. insert your windows installation disk and restart your computer
2. choose your language, and then click "Next"
3. Click "Repair your computer"
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: \Boot\BCD
Status: 0xc0000098
Info: The windows Boot Configuration Data file does not contain a valid OS entry.
I know that usually when I'm getting this message, it means that a previous MDT installation was started and did not finished correctly, and the are some [stuff] on the HD, so i do a partition erase and start over and all working fine.
Now it's not working. I tried several computer, even new ones, and NADA.
someone know the cause?
I know I read something, i don't remember where or how to find it, that when doing the steps I did, it alter\change some ini or xml, or something like this. is that true? any one know on what file do i need to look and see if something is misconfigured?
thanks a lot for your help
For a branch solution I would use DFS(R) rather than linked deploymentshares.
If there is infrastructure at the remote sites you could use the MDT environment at your main site, and then at each other site use an existing server or build a new server (VM is available). Create a Deploymentshare on each sever
and copy the contents of the MDT environment from the first site into this share. Next you will have to add the WDS service to each site's server. For WDS add the boot image. Of course as Keith noted ensure that you
have the same versions of MDT and the WAIK/ADK on all systems
You can use DFS to replicate to all of the other sites, but you will still have to create a deploymentshare, and install WDS at each site. So each site talks to its own WDS server you can use the DefaultGateway parameter instead -
[Settings]
Priority=Default, DefaultGateway
[Default]
SkipBDDWelcome=YES
[DefaultGateway]
192.168.10.1=Bergen
192.168.20.1=Oslo
[Bergen]
DeployRoot=\\MDT-Bergen\DeploymentShare$
[Oslo]
DeployRoot=\\MDT-Oslo\DeploymentShare$
If this post is helpful please click "Mark for answer", thanks! Kind regards -
Windows 8.1/IE 11 Does Not Automatically Connect to the Internet
Windows 8.1/IE 11 Does Not Automatically Connect to the Internet
I can't find the dial and redial options anywhere.
I' m connecting through PPPOE but only manual.
I know that in windows 7/8 a program like IE9 or IE10 could connect to the internet, but now it just says that I am not connected to the internet.
How to connect automacally to the internet and how to let IE to connect automatically to the internet, and why I don't have the options for dialing and redialing like in Windows 8?
Thank YouHi,
Sorry for my dilatory reply, what does your mean that IE dialing to connect to internet? Did your system can connect to Internet? or just IE 11 couldn't connect to internet. you can
check your IE poxy setting in Connections of Internet options.
If you encountered any IE problem, you can try to reset IE for test to resolve this problem.
If you need further assistance on this particular issue or any other Windows related issue, let us know and we will be glad to assist you.
Roger Lu
TechNet Community Support -
How can I ync iPhone 3Gs with my Windows 7 PC, when iTunes does not launch when I connect the iPhone to my computer? Note: My computer crashed and I am reinstalling everything.
Syncing to a new iTunes library or computer will erase your phone. Only if you back up your phone manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
Do this:
Disable autosync in iTunes, connect your phone to your new computer and right click on it in the device list and choose backup. iTunes will backup your device without syncing.
Transfer your purchases the same way, choosing "transfer purchases" this time.
When you connect your phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the iPhone for the first time.
Music is one way only, from the computer to your device, unless you bought the songs in iTunes and transferred your purchases.
There is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
About backups and what's saved:iTunes: About iOS backups
How to back up and restore:http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519
Saving other data is also described here. How to back up your data and set up as a new device
You can also back up iTunes and restore it on your new computer How to back up your media in iTunes , but the iPhone will be erased anyway during the first sync. -
want to use icloud on my macbook and cant because I am using OSX10.6.8 - I want to upgrade this but I cant upgrade to mountain lion as my mac does not support this - cannot find a way to go to Version 10.7.4 which i understand supports icloud - help to do this please
If you purchased Lion for your iMac, just log into the Mac App Store from your MacBook using the Apple ID under which you purchased Lion and go to the Purchases page. You will be able to download and install Lion there.
searching the internet i found a link to upgrtade to 10.7
The only place you get get Lion is from the Mac App Store. If you found some other site, that was an illegal copy and almost certainly tied to someone else's Apple ID and hence unusable by you. If the link was just to the Mac App Store, see above.
As to the problem with synchronization to iCloud, that's not a 10.6 question, so I'd suggest you take up that specific issue in either the Lion or iCloud forums, providing full details, and someone there can probably help you sort things out.
Regards.
Maybe you are looking for
-
How do I set up a shared folder so all user accounts can view photos?
How do I set up a shared drive for iPhotos for multiple users of my iMac?
-
My I pad mini had a lot of water spilled on it! So now is it toast?? Can it be replaced? I don't have a warranty on it because I got it as a Christmas present. Am I SOL?? If so can you please tell me how do I get my pictures that are on there? I have
-
Want to swap internal 120GB hard drive with 500GB but retain Aperture Lib
I am still on Aperture 2 but want to upgrade to Aperture 3. Current Aperture lib has grown to over 40GB. My laptop is starting to get generally slower and I feel that I have a lot of HDD fragmentation that I have not resolved yet. My internal HDD is
-
I have a number of reports that can be somewhat wide. When viewing some of them in the report manager, using IE6, the right side of the report gets cut off. There are no horizontal scroll bars or anything. If I just refresh the page from the toolb
-
I've used playlists extensi'vely to manage my 3000+ song collection (about 25 lists so far, ranging from 50 to 500 songs or so). I wish Mediasource would: . Allow me to print a playlist 2. Allow me to right click on a song and have an option to see o